IKEA BORGEBY coffee table assembly instructions
How to assemble the IKEA BORGEBY coffee table, step by step: 10 animated steps built from the official manual, about 20–30 min for 1 person, with Allen key 100001 (included).
A round black coffee table with a raised-edge top, four bent legs and a deep, round lower shelf held between the legs. Size: Ø70 cm, 42 cm high. About 20–30 min, 1 person. Tools: Allen key 100001 (included).
Based on the official IKEA manual AA-2246013-3 (PDF). Guide updated .
| Steps | 10 |
|---|---|
| Time | 20–30 min |
| People | 1 |
| Tools | Allen key 100001 (included) |
| Size | Ø70 cm, 42 cm high |
| Official manual | AA-2246013-3 |
| IKEA article number | 305.003.55 (black) |
| Pieces in the box | 19 |
In the box
| Part | Part number | Quantity |
|---|---|---|
| Table top | 1 | |
| Bent leg | 4 | |
| Round lower shelf | 1 | |
| Screw | 139556 | 12 |
| Allen key | 100001 | 1 |
Steps
- Screw the first leg to the top — Lay the table top upside down on a rug. Stand a leg on it with its curved-in arm flat on the top, pointing at the middle, over the two inserts. Fix it with 2 screws (139556) using the Allen key, but leave them slightly loose. Check: Do not tighten yet: leave a small gap under each screw head. You tighten all screws in step 5.
- Screw on the next two legs — Fit two more legs the same way, a quarter of the way round the top from each other, each arm pointing at the middle. Fix each with 2 screws (139556), again only loosely. Check: Leave every screw a little loose for now.
- Screw on the last leg — Fit the last leg in the remaining space with 2 screws (139556), loosely like the others. The four legs are now evenly spaced round the top.
- Slide the lower shelf between the legs — Tip the top with its legs over onto its edge. Slide the round lower shelf in between the legs from the feet end, open side towards the feet, until the holes in its rim line up with the holes near the bottom of the legs.
- Fix the shelf to the top and bottom legs — From inside the shelf rim, put a screw (139556) out through the rim into the leg at the top, and one into the leg at the bottom. Turn them in with the Allen key, but leave them slightly loose. Check: Do not tighten fully yet.
- Turn the table and fix the other two legs — Roll the table a quarter turn on its edge, so the other two legs are at the top and bottom. Fix them to the shelf rim the same way with 2 screws (139556), still slightly loose. Check: Do not tighten fully yet.
- Tighten the shelf screws — Now tighten all 12 screws firmly with the Allen key. Start with the 4 screws inside the shelf rim, until each head sits tight with no gap.
- Tighten the leg screws under the top — Then reach in between the top and the shelf and tighten the 8 screws that hold the legs to the top, until every head sits tight against its leg. Check: Check that all 12 screws are tight before you stand the table up.
- Stand the table up — Turn the table upright onto its four legs.
- Done! — Your BORGEBY coffee table is ready. The top holds up to 20 kg and the lower shelf up to 10 kg.
BORGEBY coffee table: questions and answers
How long does it take to assemble the IKEA BORGEBY coffee table?
About 20–30 min for 1 person, working through the 10 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.
What tools do I need for the BORGEBY coffee table?
Allen key 100001 (included). Already in the box: Allen key 100001.
Can one person assemble the BORGEBY coffee table?
Yes, it is a one-person build.
What size is the BORGEBY coffee table once assembled?
Ø70 cm, 42 cm high, as given for this model. Leave extra floor space around it while you build.
Where can I download the IKEA BORGEBY coffee table assembly instructions PDF?
The official PDF is manual AA-2246013-3, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 305.003.55 (black); other colours have their own numbers but usually the same manual.
Which IKEA manual is this guide based on?
The official manual AA-2246013-3. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.
What if a part or screw is missing?
Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example screw 139556). IKEA customer service can send replacement fittings using that number.
Related assembly guides
- IKEA LACK side table assembly instructions
- IKEA LACK coffee table assembly instructions
- IKEA NORDEN gateleg table assembly instructions
- IKEA KVISTBRO storage table assembly instructions
- IKEA LISABO table assembly instructions
- IKEA TÄRNÖ table, outdoor assembly instructions
- IKEA TINGBY side table on castors assembly instructions
- IKEA BURVIK side table assembly instructions
All tables assembly guides · All furniture assembly guides
Stuck on a step? Common assembly problems and fixes · Furniture hardware explained