Tables assembly instructions
Side tables, coffee tables and dining tables. Usually legs screwed straight into the top, sometimes with a lower shelf.
- IKEA LACK side table assembly instructions — 5 steps, about 10 min. The classic square side table. Four legs screw straight into the top: no tools needed.
- IKEA LACK coffee table assembly instructions — 10 steps, about 30 min. The classic LACK coffee table with a lower shelf. Legs screw into the top by hand; the shelf rests on 4 small angle brackets.
- IKEA NORDEN gateleg table assembly instructions — 13 steps, about 1–2 hours. Solid birch drop-leaf table: a slim underframe with 6 small drawers and two swing-out gate legs, so it folds down to a 26 cm deep console.
- IKEA KVISTBRO storage table assembly instructions — 3 steps, about 5 min. A round black wire basket that doubles as a side table: stick four pads under it and lay the lid on top.
- IKEA LISABO table assembly instructions — 5 steps, about 15 min. Dining table with an ash veneer top and solid birch legs that slide onto rails under the top and lock with 4 tool-tightened fittings.
- IKEA TÄRNÖ table, outdoor assembly instructions — 7 steps, about 5 min. Small folding garden table: hook the black steel frame into the slatted acacia top, lock it with one knob, done. It comes apart again in seconds to store flat.
- IKEA TINGBY side table on castors assembly instructions — 6 steps, about 15 min. A square white side table on castors with a lower shelf: four quarter-round legs click into the top, the shelf goes on, and the castors screw through it into the legs.
- IKEA BURVIK side table assembly instructions — 4 steps, about 5 min. A small round tray table with a carrying handle. Four legs screw on by hand; two of them also hold the handle.
- IKEA OLSERÖD side table assembly instructions — 19 steps, about 30 min. A C-shaped sofa table in anthracite steel tube with a birch-effect top and a dark yellow fabric pocket: four tubes screw into one loop, the top clips on, and it can also be set up as a low table.
- IKEA VITTSJÖ coffee table assembly instructions — 8 steps, about 20–30 min. Round light beige steel coffee table with a tempered glass top and a walnut-effect shelf: two slotted leg frames on a top ring, a shelf screwed onto the cross bars, then the glass.
- IKEA SKOGSTA dining table assembly instructions — 21 steps, about 1 h. Large solid acacia dining table with a two-piece top on two black leaning leg frames, joined by a long stretcher and a V-shaped brace.
- IKEA BORGEBY coffee table assembly instructions — 10 steps, about 20–30 min. A round black coffee table with a raised-edge top, four bent legs and a deep, round lower shelf held between the legs.
- IKEA HOLMERUD side table assembly instructions — 29 steps, about 1–1.5 hours. Oak-effect side table with a low bench on one side and a shelved bay on the other, built upside down and on its back with cam locks, dowels and three screws.
- IKEA HOL storage table assembly instructions — 8 steps, about 20–30 min. An acacia lattice chest that doubles as a coffee table: four lattice panels and a plain bottom screwed together, with a loose lid on top.
- IKEA HOL side table assembly instructions — 8 steps, about 15–25 min. A square acacia lattice cube that works as a side table with storage inside: four lattice panels and a plain bottom screwed together, with a loose lid on top.
- IKEA MÖRBYLÅNGA dining table assembly instructions — 13 steps, about 45 min. Solid-looking oak veneer dining table with a two-piece top joined by two long rails and two closed leg frames.
- IKEA BILLY bookcase with foldable table assembly instructions — 42 steps, about 2–3 hours. A low BILLY bookcase with a shelf cart on castors inside: pull it out and a hinged tabletop unfolds from the bookcase into a 112 cm deep table.
- IKEA MARIEDAMM table assembly instructions — 13 steps, about 30 min. Round dining table with a black marble-effect top on 4 crossing bent steel legs, locked together in the middle by a square connector.
- IKEA IDANÄS side table assembly instructions — 16 steps, about 45–60 minutes. White side table with tapered legs, a middle shelf and a bottom shelf, built on its side from two ready-made side frames with cam locks, then finished upright.
Assembling tables: the numbers
Counted from the 19 guides in Tables, each built from its official manual.
| Guides | 19 |
|---|---|
| Steps | 3 to 42 (typically 10) |
| Time | about 5 min (KVISTBRO storage table) to about 2–3 hours (BILLY bookcase with foldable table) |
| Fittings per build | 0 to 165 (typically 18) |
| Planned for two people | 5 of 19 |
| Wall fixing in the manual | 1 of 19 |
| Most common tools | Allen key (9), Phillips screwdriver (6), Hammer (5), Flat-blade screwdriver (5) |
| No tools needed | 4 of 19 |
| Allen key supplied | 11 of 19 |
Fittings in tables boxes
The kinds of fitting these manuals use most. What each one does: furniture hardware explained.
| Fitting | Guides | Total |
|---|---|---|
| Screws | 14 of 19 | 211 |
| Feet, glides and castors | 9 of 19 | 43 |
| Wooden dowels | 8 of 19 | 117 |
| Cam screws and connectors | 6 of 19 | 63 |
| Cam locks | 4 of 19 | 58 |
| Bolts and Allen screws | 4 of 19 | 32 |
What the tables manuals warn about
Notes from the official manuals, at the step where they apply.
- Use screw 108530 here, not the shorter 109041. (LACK coffee table, step 4)
- The countersunk side of the holes faces up. The slotted holes stay free for now. (NORDEN gateleg table, step 2)
- Fragile: do not sit or stand on the table. Max load on the lid: 10 kg (22 lb). (KVISTBRO storage table, step 2)
- The gear wheel must face the leg. A fitting put in the wrong way round does not lock the leg. (LISABO table, step 2)
- Hold each leg upright as you push it in: a tilted leg will not go into the holes. (TINGBY side table on castors, step 1)
- It is a tight fit: keep the shelf tilted until it is past the legs. (VITTSJÖ coffee table, step 4)
Tables by IKEA range
Ranges with more than one guide: each page compares the models and the fittings they share.
Tables: questions and answers
How long does it take to assemble tables?
In these 19 guides, from about 5 min for the KVISTBRO storage table to about 2–3 hours for the BILLY bookcase with foldable table. Each guide gives its own estimate for the planned number of people.
Can one person assemble tables?
14 of the 19 tables guides here are one-person builds; 5 are planned for two people, usually for the steps where a large part is lifted, turned or stood up.
What tools do I need for tables?
Most often Allen key (9 of 19, supplied), Phillips screwdriver (6 of 19), hammer (5 of 19) and flat-blade screwdriver (5 of 19). 4 need no tools. Each guide lists exactly what it needs.
Do tables need to be fixed to the wall?
1 of the 19 manuals includes a wall fixing. Furniture that can tip over must be fixed as its manual shows; use screws and plugs that suit your wall.