IKEA VITTSJÖ coffee table assembly instructions
How to assemble the IKEA VITTSJÖ coffee table, step by step: 8 animated steps built from the official manual, about 20–30 min for 1 person, with Phillips screwdriver, pencil.
Round light beige steel coffee table with a tempered glass top and a walnut-effect shelf: two slotted leg frames on a top ring, a shelf screwed onto the cross bars, then the glass. Size: Ø75 cm. About 20–30 min, 1 person. Tools: Phillips screwdriver, Pencil.
Based on the official IKEA manual AA-517325-11 (PDF). Guide updated .
| Steps | 8 |
|---|---|
| Time | 20–30 min |
| People | 1 |
| Tools | Phillips screwdriver, Pencil |
| Size | Ø75 cm |
| Official manual | AA-517325-11 |
| IKEA article number | 306.043.48 (light beige glass) |
| Pieces in the box | 23 |
In the box
| Part | Part number | Quantity |
|---|---|---|
| Top ring | 1 | |
| Leg frame (2 legs + cross bar) | 2 | |
| Shelf | 1 | |
| Glass top | 1 | |
| Adjustable foot | 143131 | 4 |
| Screw | 116654 | 4 |
| Screw | 117494 | 4 |
| Bumper 123741 (3 sheets of 2) | 6 |
Steps
- Leg frames onto the ring — Lay the top ring upside down on a soft surface, brackets up. Lower the first leg frame so its 2 leg ends slide over 2 brackets, notch in the bar facing up. Lower the second frame across it, notch down, so the bars lock together in the middle and its legs slide over the other 2 brackets. Check: Work on a soft surface, such as a rug or the flattened box, to protect the ring.
- Screw the legs to the ring — From the inside of the table, fix each leg to its bracket with a screw 116654 through the hole just above the ring. Tighten all 4 with a Phillips screwdriver.
- Screw in the feet — Screw an adjustable foot into the open end of each leg by hand, turning it clockwise until it stops.
- Slide in the shelf — Tilt the shelf and feed it in between two legs, under the cross bars. Inside, level it out and lift it up against the bars, centred between the 4 legs. Check: It is a tight fit: keep the shelf tilted until it is past the legs.
- Screw the shelf to the bars — Hold the shelf against the bars. Push a pencil through the hole near each end of the bars to mark the shelf, then drive a screw 117494 through each hole into the shelf with a Phillips screwdriver.
- Turn it over and add the bumpers — Turn the table over onto its feet. Peel the 6 clear bumpers off their sheets and stick them evenly spaced around the flat top of the ring.
- Lay on the glass top — Lower the glass top straight down onto the bumpers, centred on the ring. Check: Handle the tempered glass with care and never knock its edge.
- Done! — Your VITTSJÖ coffee table is ready. Turn the feet to level it on an uneven floor. Max load: 10 kg.
VITTSJÖ coffee table: questions and answers
How long does it take to assemble the IKEA VITTSJÖ coffee table?
About 20–30 min for 1 person, working through the 8 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.
What tools do I need for the VITTSJÖ coffee table?
Phillips screwdriver, pencil.
Can one person assemble the VITTSJÖ coffee table?
Yes, it is a one-person build.
What size is the VITTSJÖ coffee table once assembled?
Ø75 cm, as given for this model. Leave extra floor space around it while you build.
How many screws and fittings come with the VITTSJÖ coffee table?
12 fittings of 3 kinds, the most numerous being 4 × adjustable foot, 4 × screw, 4 × screw. The In the box table lists every one with its part number, so you can count them before you start.
Where can I download the IKEA VITTSJÖ coffee table assembly instructions PDF?
The official PDF is manual AA-517325-11, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 306.043.48 (light beige glass); other colours have their own numbers but usually the same manual.
Which IKEA manual is this guide based on?
The official manual AA-517325-11. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.
What if a part or screw is missing?
Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example adjustable foot 143131). IKEA customer service can send replacement fittings using that number.
Related assembly guides
- IKEA VITTSJÖ shelving unit assembly instructions
- IKEA LACK side table assembly instructions
- IKEA LACK coffee table assembly instructions
- IKEA NORDEN gateleg table assembly instructions
- IKEA KVISTBRO storage table assembly instructions
- IKEA LISABO table assembly instructions
- IKEA TÄRNÖ table, outdoor assembly instructions
- IKEA TINGBY side table on castors assembly instructions
All IKEA VITTSJÖ assembly guides · All tables assembly guides · All furniture assembly guides
Stuck on a step? Common assembly problems and fixes · Furniture hardware explained