Step by StepAssembly Find your furniture

IKEA VITTSJÖ shelving unit assembly instructions

How to assemble the IKEA VITTSJÖ shelving unit, step by step: 15 animated steps built from the official manual, about 45–60 min for 1 person, with Phillips screwdriver.

IKEA VITTSJÖ shelving unit, assembled

Slim black-brown steel shelving unit with three glass shelves: two ladder-style side frames joined by crossbars, a top and bottom panel, then fixed to the wall. Size: 51×36×175 cm. About 45–60 min, 1 person. Tools: Phillips screwdriver.

Based on the official IKEA manual AA-542661-17 (PDF). Guide updated .

VITTSJÖ shelving unit: quick facts
Steps15
Time45–60 min
People1
ToolsPhillips screwdriver
Size51×36×175 cm
Official manualAA-542661-17
IKEA article number502.146.78 (black brown glass)
Pieces in the box68

In the box

PartPart numberQuantity
Side frame (ladder)2
Crossbar8
Corner plate2
Top frame1
Top panel1
Bottom panel1
Glass shelf3
Adjustable foot1221584
Screw11665426
Screw1237238
Bumper 123741 (6 sheets of 2)12

Steps

  1. Feet into the first side frame — Lay one side frame flat on the floor with its brackets facing up and the 2 small holes in the near (back) leg as shown. Screw an adjustable foot into the bottom end of each leg by hand.
  2. Two bottom crossbars — Stand 2 crossbars in the brackets at the feet end, one in each leg. The round tab with the screw hole must point inwards, towards the other crossbar. Check: Check the detail: turn each crossbar so its round tabs point inwards, towards the other crossbar.
  3. Screw the bottom crossbars — Fix each crossbar with a screw 116654 through the side of its bracket, turning it in with a Phillips screwdriver.
  4. Back crossbar of the second level — Stand the crossbar with the extra hole in the back bracket of the second level, next to the 2 small holes in the leg. The extra hole faces out, away from the shelf. Check: Only this crossbar has the extra hole for the corner plate.
  5. Screw it — Fix it with a screw 116654 through the bracket.
  6. The other 5 crossbars — Stand the remaining 5 crossbars in the free brackets, tabs pointing inwards, and fix each one with a screw 116654.
  7. Feet into the second side frame — Lay the second side frame flat, brackets facing up, and screw the other 2 adjustable feet into its leg ends.
  8. Second side frame on top — Turn the second side frame over and lower it onto the 8 crossbars so each bar end drops into a bracket, feet at the same end. Fix every bracket with a screw 116654.
  9. Corner plates — On the back, fit a triangular corner plate at each end of the second-level crossbar: 2 screws 116654 into the leg and 1 into the crossbar.
  10. Top panel onto the top frame — Lay the top panel on the floor, the side you want on top facing down. Put the top frame on it upside down, corner channels up, and screw it to the panel with 4 screws 123723 through the round tabs. Check: The top and bottom panels are black-brown on one side and black on the other: choose the side you want to see.
  11. Top frame onto the leg ends — Turn the top up on its edge and slide the frame's 4 corner channels over the top ends of the legs. Fix each corner with a screw 116654 from the inside.
  12. Bottom panel — Lower the bottom panel into the bottom compartment and push it down onto the 4 round tabs of the bottom crossbars. Screw it on from underneath with 4 screws 123723.
  13. Stand it up and fix it to the wall — Tip the unit up onto its feet and place it against the wall. Fix the top of both back legs to the wall with a screw that suits your wall, through the holes just below the top frame. Check: Must be fixed to the wall to prevent tip-over. Wall screws and plugs are not included: use pan-head screws (not countersunk) suitable for your wall.
  14. Bumpers and glass shelves — Stick a clear bumper on each of the 4 round tabs of the three upper levels, 12 in total. Then lay a glass shelf on the bumpers of each level. Check: Handle the glass shelves with care.
  15. Done! — Your VITTSJÖ shelving unit is assembled and fixed to the wall. Max load 7 kg per shelf.

VITTSJÖ shelving unit: questions and answers

How long does it take to assemble the IKEA VITTSJÖ shelving unit?

About 45–60 min for 1 person, working through the 15 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the VITTSJÖ shelving unit?

Phillips screwdriver.

Can one person assemble the VITTSJÖ shelving unit?

Yes, it is a one-person build.

Does the VITTSJÖ shelving unit need to be fixed to the wall?

The manual shows a wall fixing: see step 13 (Stand it up and fix it to the wall) and step 15 (Done). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.

What size is the VITTSJÖ shelving unit once assembled?

51×36×175 cm, as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the VITTSJÖ shelving unit?

38 fittings of 3 kinds, the most numerous being 26 × screw, 8 × screw, 4 × adjustable foot. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA VITTSJÖ shelving unit assembly instructions PDF?

The official PDF is manual AA-542661-17, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 502.146.78 (black brown glass); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-542661-17. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example adjustable foot 122158). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All IKEA VITTSJÖ assembly guides · All bookcases & shelves assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained