IKEA HYLLIS shelving unit (in/outdoor) assembly instructions
How to assemble the IKEA HYLLIS shelving unit (in/outdoor), step by step: 7 animated steps built from the official manual, about 20–30 min for 1 person, with Phillips screwdriver.
Galvanised steel shelving for indoors or outdoors: four angle-steel uprights screwed to four sheet-steel shelves, then fixed to the wall. Size: 60×27×140 cm (23 5/8×10 5/8×55 1/8"). About 20–30 min, 1 person. Tools: Phillips screwdriver.
Based on the official IKEA manual AA-1001159-11 (PDF). Guide updated .
| Steps | 7 |
|---|---|
| Time | 20–30 min |
| People | 1 |
| Tools | Phillips screwdriver |
| Size | 60×27×140 cm (23 5/8×10 5/8×55 1/8") |
| Official manual | AA-1001159-11 |
| IKEA article number | 002.785.78 |
| Pieces in the box | 44 |
In the box
| Part | Part number | Quantity |
|---|---|---|
| Upright (steel angle) | 4 | |
| Shelf (sheet steel) | 4 | |
| Screw | 190018 | 32 |
| Plastic foot | 157476 | 4 |
Steps
- Feet onto the uprights — Lay the 4 uprights side by side on the floor. Push a plastic foot (157476) onto the same end of each one, so the angle of the upright sits in the groove of the foot. Check: Work on a rug or the cardboard from the box so the steel does not scratch the floor.
- Shelves onto the first two uprights — Lay two uprights parallel, flat flange on the floor. Stand the 4 shelves on their long edge between them, line up the holes, and fix each shelf with one screw (190018) through each upright: 8 screws.
- The other two uprights on top — Lay the other two uprights over the upper edges of the shelves, with the feet at the same end. Fix every shelf corner with 2 screws (190018): one down through the top flange, one through the side flange. 16 screws in total.
- Turn it over, 8 more screws — Turn the whole unit over so the first two uprights are on top. Fix every shelf corner through their flat flanges with one screw (190018): 8 screws.
- Stand it up and tighten — Tip the unit up onto its feet and place it against the wall. Then go round and tighten all 32 screws firmly.
- Fix it to the wall — Fix the two back uprights to the wall through a hole near the top of each, with screws and plugs that suit your wall. Check: Must be fixed to the wall to prevent it tipping over. Wall screws and plugs are not included. Max load 25 kg per shelf.
- Done! — Your HYLLIS shelving unit is assembled and fixed to the wall. It can be used indoors or outdoors under a roof. Max load 25 kg (55 lb) per shelf.
HYLLIS shelving unit (in/outdoor): questions and answers
How long does it take to assemble the IKEA HYLLIS shelving unit (in/outdoor)?
About 20–30 min for 1 person, working through the 7 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.
What tools do I need for the HYLLIS shelving unit (in/outdoor)?
Phillips screwdriver.
Can one person assemble the HYLLIS shelving unit (in/outdoor)?
Yes, it is a one-person build.
Does the HYLLIS shelving unit (in/outdoor) need to be fixed to the wall?
The manual shows a wall fixing: see step 6 (Fix it to the wall) and step 7 (Done). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.
What size is the HYLLIS shelving unit (in/outdoor) once assembled?
60×27×140 cm (23 5/8×10 5/8×55 1/8"), as given for this model. Leave extra floor space around it while you build.
How many screws and fittings come with the HYLLIS shelving unit (in/outdoor)?
36 fittings of 2 kinds, the most numerous being 32 × screw, 4 × plastic foot. The In the box table lists every one with its part number, so you can count them before you start.
Where can I download the IKEA HYLLIS shelving unit (in/outdoor) assembly instructions PDF?
The official PDF is manual AA-1001159-11, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 002.785.78; other colours have their own numbers but usually the same manual.
Which IKEA manual is this guide based on?
The official manual AA-1001159-11. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.
What if a part or screw is missing?
Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example screw 190018). IKEA customer service can send replacement fittings using that number.
Related assembly guides
- IKEA BILLY bookcase assembly instructions
- IKEA KALLAX shelf unit 2x4 assembly instructions
- IKEA BESTÅ frame assembly instructions
- IKEA LACK wall shelf assembly instructions
- IKEA VESKEN shelf unit assembly instructions
- IKEA EKET cabinet assembly instructions
- IKEA BRIMNES bookcase assembly instructions
- IKEA HEMNES bookcase assembly instructions
All bookcases & shelves assembly guides · All furniture assembly guides
Stuck on a step? Common assembly problems and fixes · Furniture hardware explained