IKEA BILLY bookcase assembly instructions
How to assemble the IKEA BILLY bookcase, step by step: 15 animated steps built from the official manual, about 45–60 min for 2 people, with flat & Phillips screwdriver, hammer.
The best-selling bookcase: cam-lock frame, slide-in back panel, 4 adjustable shelves and wall anchoring. Size: 80×28×202 cm (31 1/2×11×79 1/2"). About 45–60 min, 2 people. Tools: Flat & Phillips screwdriver, Hammer.
Based on the official IKEA manual AA-2289108-3 (PDF). Guide updated .
| Steps | 15 |
|---|---|
| Time | 45–60 min |
| People | 2 |
| Tools | Flat & Phillips screwdriver, Hammer |
| Size | 80×28×202 cm (31 1/2×11×79 1/2") |
| Official manual | AA-2289108-3 |
| IKEA article number | 205.220.46 (white) |
| Pieces in the box | 93 |
In the box
| Part | Part number | Quantity |
|---|---|---|
| Side panel | 2 | |
| Board (top/middle/bottom) | 3 | |
| Plinth | 1 | |
| Back panel | 1 | |
| Shelf | 4 | |
| Wooden dowel | 101351 | 16 |
| Cam screw | 118331 | 12 |
| Cam lock | 119081 | 12 |
| Back-panel fastener 151705 + | 151706 | 18 |
| Shelf pin | 131372 | 16 |
| Wall bracket | 106989 | 2 |
| Screw | 109041 | 2 |
| Washer | 100823 | 4 |
Steps
- Dowels into the boards and plinth — Lay the top, middle and bottom boards and the plinth flat. Push 4 wooden dowels into the holes in the ends of each one, 16 in total.
- Cam screws into the side panels — Lay both side panels flat, inside (the rows of small holes) facing up and the notched ends the same way. Screw 2 cam screws in at each of the 3 board positions, 12 in total, with a Phillips screwdriver.
- Fit plinth, bottom and middle board — Stand the plinth, the bottom board and the middle board on end on one side panel and push their dowels into its holes. The plinth goes at the front of the notched end. The small holes in the board edges face the back (the notched edge), and the large holes face the notched end.
- Lock the first 4 cam locks — Push a cam lock into each of the 4 large holes next to the lower side panel, opening towards the cam screw, and turn it clockwise with a flat screwdriver until it grips.
- Top board + 2 cam locks — Fit the top board at the other end in the same way, with its large holes facing outwards, away from the other boards. Lock it with 2 cam locks from the outside. Check: If the large holes of the top board face inwards, turn it round.
- Second side panel on top — Turn the second side panel over, inside face down, and press it straight down onto all the dowels and cam screws.
- Lock the bottom and middle boards — Push cam locks into the 4 large holes of the bottom and middle boards next to the upper side panel and turn each one clockwise until it grips.
- Lock the top board — Fit the last 2 cam locks into the outside of the top board and turn them clockwise to lock it to the upper side panel.
- Slide in the back panel — Carefully lay the bookcase on its front. Unfold the back panel and slide it into the grooves from the bottom end all the way up. Check: Two people recommended.
- Fix the back panel — Push a plug (151706) through the back panel into each of the 18 holes in the edges of the bottom, middle and top boards, then press a pin (151705) into each plug.
- Stand it up and fix it to the wall — Tip the bookcase up and place it against the wall. Screw the 2 wall brackets to the top board (screw 109041 + washer 100823), then to the wall with a washer and a screw that suits your wall. Check: Must be fixed to the wall to prevent tip-over. Wall screws and plugs are not included.
- Shelf pins: left side — Push the shelf pins into the left side panel: front and back hole, at the height you want for each of the 4 shelves (2 below the fixed middle board, 2 above it).
- Shelf pins: right side — Push the other 8 shelf pins into the right side panel at exactly the same heights, so each shelf rests level on 4 pins.
- Place the shelves — Slide each shelf in just above its 4 pins and lower it onto them.
- Done! — Your BILLY bookcase is assembled and anchored to the wall. Max load: 30 kg (66 lb) per shelf.
BILLY bookcase: questions and answers
How long does it take to assemble the IKEA BILLY bookcase?
About 45–60 min for 2 people, working through the 15 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.
What tools do I need for the BILLY bookcase?
Flat & Phillips screwdriver, hammer.
Can one person assemble the BILLY bookcase?
It is planned as a 2-person build. One person can do most of it, but get help for steps 6 and 11, where the furniture is lifted or turned.
Does the BILLY bookcase need to be fixed to the wall?
The manual shows a wall fixing: see step 11 (Stand it up and fix it to the wall) and step 15 (Done). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.
What size is the BILLY bookcase once assembled?
80×28×202 cm (31 1/2×11×79 1/2"), as given for this model. Leave extra floor space around it while you build, and room to lift or stand it up.
How many screws and fittings come with the BILLY bookcase?
82 fittings of 8 kinds, the most numerous being 18 × back-panel fastener 151705 +, 16 × wooden dowel, 16 × shelf pin. The In the box table lists every one with its part number, so you can count them before you start.
Where can I download the IKEA BILLY bookcase assembly instructions PDF?
The official PDF is manual AA-2289108-3, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 205.220.46 (white); other colours have their own numbers but usually the same manual.
Which IKEA manual is this guide based on?
The official manual AA-2289108-3. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.
What if a part or screw is missing?
Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example wooden dowel 101351). IKEA customer service can send replacement fittings using that number.
Related assembly guides
- IKEA BILLY bookcase with foldable table assembly instructions
- IKEA KALLAX shelf unit 2x4 assembly instructions
- IKEA BESTÅ frame assembly instructions
- IKEA HYLLIS shelving unit (in/outdoor) assembly instructions
- IKEA LACK wall shelf assembly instructions
- IKEA VESKEN shelf unit assembly instructions
- IKEA EKET cabinet assembly instructions
- IKEA BRIMNES bookcase assembly instructions
All IKEA BILLY assembly guides · All bookcases & shelves assembly guides · All furniture assembly guides
Stuck on a step? Common assembly problems and fixes · Furniture hardware explained