IKEA BRIMNES bookcase assembly instructions
How to assemble the IKEA BRIMNES bookcase, step by step: 31 animated steps built from the official manual, about 2–3 hours for 2 people, with flat & Phillips screwdriver, hammer, pencil.
A tall black bookcase with two drawers: cam-lock frame, nailed-on back panel, 3 adjustable shelves, wall anchoring and two framed drawers on runners. Size: 60×35×190 cm. About 2–3 hours, 2 people. Tools: Flat & Phillips screwdriver, Hammer, Pencil.
Based on the official IKEA manual AA-1357641-10 (PDF). Guide updated .
| Steps | 31 |
|---|---|
| Time | 2–3 hours |
| People | 2 |
| Tools | Flat & Phillips screwdriver, Hammer, Pencil |
| Size | 60×35×190 cm |
| Official manual | AA-1357641-10 |
| IKEA article number | 403.012.23 (black) |
| Pieces in the box | 178 |
In the box
| Part | Part number | Quantity |
|---|---|---|
| Side panel | 2 | |
| Top | 1 | |
| Fixed shelf | 1 | |
| Plinth | 1 | |
| Back rail | 1 | |
| Shelf | 3 | |
| Back panel (folding fibreboard) | 1 | |
| Drawer front | 2 | |
| Drawer side | 4 | |
| Drawer back | 2 | |
| Drawer bottom | 2 | |
| Cam screw | 118331 | 16 |
| Wooden dowel | 101345 | 20 |
| Cam lock 119030/118224 | 16 | |
| Screw | 108462 | 16 |
| Drawer runner 130501 (2 sets of 4) | 8 | |
| Glide 153548/158568 | 4 | |
| Screw | 100214 | 4 |
| Allen key | 100001 | 1 |
| Nail | 101221 | 30 |
| Nail holder | 105494 | 1 |
| Shelf pin | 113301 | 12 |
| Wall bracket | 106989 | 2 |
| Screw | 109503 | 2 |
| Washer | 100823 | 4 |
| Expansion dowel | 110519 | 8 |
| Bumper 107091 (2 sheets of 2) | 4 | |
| Corner bracket | 110678 | 4 |
| Handle | 130508 | 2 |
| Screw | 109567 | 4 |
Steps
- Cam screws into the side panels — Lay both side panels on a soft surface, inside facing up. Screw 4 cam screws into the small holes of each panel with a Phillips screwdriver. Check: Work on a rug or the empty box so the panels do not get scratched.
- Runners on the side panels — Lay 2 runners across the lower end of each side panel, wheel at the front edge, and fix each runner with 2 screws.
- Fixed shelf, plinth and back rail — Push a wooden dowel into one end of the fixed shelf (2), the plinth and the back rail. Stand the three parts on edge on the right-hand side panel, dowels into the holes: the fixed shelf just above the runners, the plinth and the back rail at the bottom end.
- Lock them with 4 cam locks — Put a cam lock into each of the 4 big holes next to the side panel and turn it clockwise with a flat screwdriver until it grips the cam screw.
- Onto its back, second side panel up — Roll the frame onto its back so the side panel stands on edge. Turn the second side panel up on its back edge in front of the frame. Push a dowel into the free end of the fixed shelf (2), the plinth and the back rail. Check: Two people make this easier.
- Second side panel + 4 cam locks — Push the second side panel onto the dowels and cam screws. Insert 4 cam locks at this end and turn each one to lock.
- Glides under the side panels — Press 2 glides into the bottom edge of each side panel, one at the front and one at the back.
- Fit the top — Push 4 dowels into the top edges of the side panels. Turn the top over onto them, with its profiled edge to the front. Check: Check the profiled edge: it must be at the front of the bookcase.
- Screw the top on — Fix the top to the side panels with the 4 long screws, tightening them with the Allen key.
- Turn it over and mark the fixed shelf — Turn the bookcase over onto its front. With a pencil, mark the middle of the fixed shelf on the back edge of both side panels. Check: The marks show where to nail the back panel to the fixed shelf.
- Lay the back panel on — Unfold the back panel and lay it on the back of the bookcase.
- Nail the first corner — Line the back panel up with the top and the side panel at one top corner. Put a nail in the nail holder and hammer it in. Check: The back panel must be flush with the edges before you nail.
- Nail two more corners — Line the panel up along the edges again and nail the other top corner, then a bottom corner.
- Draw the fixed-shelf line — Draw a pencil line across the back panel between the two marks, so you can see where the fixed shelf is.
- Nail the back panel all round — Nail the back panel with the remaining 27 nails: along both side panels, the top, the bottom rail and along the line into the fixed shelf.
- Stand it up, shelf pins in — With two people, stand the bookcase up. Push 4 shelf pins into the side panels for each of the 3 shelves, at the same height on both sides. Check: Two people are needed to stand it up.
- Place the shelves — Lower each of the 3 shelves onto its 4 pins.
- Fix it to the wall — Place the bookcase against the wall. Screw the 2 wall brackets to the top at the back (screw 109503 + washer 100823), then to the wall with screws and plugs that suit your wall, each with a washer 100823. Check: Tall furniture can tip over. It must be fixed to the wall. Wall screws and plugs are not included.
- Drawer fronts: cam screws — Build both drawers the same way. Lay each drawer front face down and screw 4 cam screws into the small holes on the inside.
- Dowels and drawer sides — Push 4 dowels into the holes in each drawer front. Stand the 2 sides on the front, pushing them onto the dowels and cam screws, grooves facing in.
- Slide in the drawer bottoms — Slide each drawer bottom down into the grooves in the sides until it touches the front.
- Drawer backs on — Place the back between the sides at the open end, over the end of the drawer bottom.
- Expansion dowels through the sides — Hammer 4 expansion dowels through the sides into each drawer back, 2 on each side.
- Lock the drawer sides — Put a cam lock into each of the 4 holes near the front of the sides and turn it clockwise to lock the sides to the front.
- Bumpers on the fronts — Stick 2 bumpers on the inside of each drawer front, just outside the drawer sides.
- Turn over, runners on — Turn each drawer upside down. Place a runner on the bottom edge of each side, wheel at the back. Check: The left and right runners are different: check the markings.
- Screw the runners on — Fix each runner to the drawer side with 2 screws.
- Corner brackets — Screw 2 corner brackets onto each drawer bottom, both in the middle: one into the corner against the front, one into the corner against the back.
- Handles on — Turn each drawer upright. Hold a handle against the top rail of the front and fix it with 2 screws from inside the drawer.
- Slide the drawers in — Set each drawer’s runner wheels onto the runners in the bookcase and push the drawer all the way in: the top drawer first, then the bottom one.
- Done! — Your BRIMNES bookcase is assembled and anchored to the wall. Max load: 18 kg per shelf.
BRIMNES bookcase: questions and answers
How long does it take to assemble the IKEA BRIMNES bookcase?
About 2–3 hours for 2 people, working through the 31 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.
What tools do I need for the BRIMNES bookcase?
Flat & Phillips screwdriver, hammer, pencil.
Can one person assemble the BRIMNES bookcase?
It is planned as a 2-person build. One person can do most of it, but get help for steps 8, 10 and 16, where the furniture is lifted or turned.
Does the BRIMNES bookcase need to be fixed to the wall?
The manual shows a wall fixing: see step 18 (Fix it to the wall) and step 31 (Done). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.
What size is the BRIMNES bookcase once assembled?
60×35×190 cm, as given for this model. Leave extra floor space around it while you build, and room to lift or stand it up.
How many screws and fittings come with the BRIMNES bookcase?
145 fittings of 16 kinds, the most numerous being 30 × nail, 20 × wooden dowel, 16 × cam screw. The In the box table lists every one with its part number, so you can count them before you start.
Where can I download the IKEA BRIMNES bookcase assembly instructions PDF?
The official PDF is manual AA-1357641-10, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 403.012.23 (black); other colours have their own numbers but usually the same manual.
Which IKEA manual is this guide based on?
The official manual AA-1357641-10. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.
What if a part or screw is missing?
Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example cam screw 118331). IKEA customer service can send replacement fittings using that number.
Related assembly guides
- IKEA BRIMNES wardrobe with 3 doors assembly instructions
- IKEA BRIMNES cabinet with doors assembly instructions
- IKEA BRIMNES bedside table assembly instructions
- IKEA BRIMNES day-bed frame with 2 drawers assembly instructions
- IKEA BRIMNES dressing table assembly instructions
- IKEA BRIMNES chest of 4 drawers assembly instructions
- IKEA BRIMNES TV bench assembly instructions
- IKEA BRIMNES chest of 3 drawers assembly instructions
All IKEA BRIMNES assembly guides · All bookcases & shelves assembly guides · All furniture assembly guides
Stuck on a step? Common assembly problems and fixes · Furniture hardware explained