IKEA assembly problems and how to fix them
The problems people run into most when building flat-pack furniture, and what to check first. Each fix links to the hardware it involves and to guides you can open at the exact step.
Why won't my IKEA drawer close (or why does it stick)?
- The most common cause is runners fitted at different heights: count the holes from the front edge and check the left and right runners use the same ones, on the cabinet and on the drawer.
- Check the drawer box is square: measure both diagonals, they should match. The bottom panel must sit in its groove all the way round; if it has slipped out, the box twists and rubs.
- Look behind the drawer: a back panel bowing inwards, a cam lock that sticks out because it was not turned fully, or something that fell in can stop it a few millimetres short.
- Runners only go in one way round: if a drawer drops or will not engage, compare the runner with the close-up in the manual.
Runners explained: drawer runners. Guides with drawers: IKEA MALM chest of 3 drawers, IKEA HEMNES 3-drawer dresser, IKEA ALEX drawer unit.
Why is my IKEA furniture wobbly, and how do I fix it?
- On most cabinets and bookcases the back panel is what keeps the frame square. Push the frame square (both diagonals equal) and fix the back panel with every nail or clip the manual shows.
- Check every cam lock is turned until it is tight: a loose one lets the panels move.
- An uneven floor makes anything rock: use the adjustable feet if it has them, or a felt pad or shim under the short corner.
- Tall furniture must be fixed to the wall anyway: it stops wobble and, more importantly, stops it tipping over.
Wall fixing · adjustable feet. Builds with a nailed back panel: IKEA MALM chest of 3 drawers, IKEA HEMNES 3-drawer dresser, IKEA BRIMNES wardrobe with 3 doors. With feet or glides: IKEA MALM chest of 3 drawers, IKEA HEMNES 3-drawer dresser, IKEA PAX wardrobe frame.
Why does my IKEA cam lock spin and not tighten?
- The cam lock pulls on the head of a cam screw in the next panel. If the cam screw is not screwed fully into its hole, or the panels are not pushed together, the lock has nothing to grip.
- Push the cam lock in with its opening facing the cam screw, then turn it (usually clockwise, about half a turn) until it tightens. Forcing it further can strip the board.
- If the hole for the cam screw is stripped, glue a little wood into it (toothpicks or a dowel with wood glue), let it dry and screw it in again, or ask IKEA for a replacement fitting by part number.
Cam locks and cam screws explained. Cam-lock builds: IKEA MALM chest of 3 drawers, IKEA HEMNES 3-drawer dresser, IKEA BILLY bookcase.
What do I do if a screw just spins in its hole?
- The hole is stripped, which is common in particleboard after over-tightening with a drill.
- Fill it: push wooden toothpicks or matchsticks with wood glue into the hole, snap them off flush, let the glue dry, then drive the screw again by hand.
- Next time, finish screws by hand and stop when they are snug.
Screws explained.
How do I line up IKEA cabinet doors?
- Most concealed (cup) hinges adjust in three directions: one screw moves the door sideways, one moves it in and out, and the mounting plate moves it up and down.
- Adjust one hinge a quarter turn at a time and check the gap between doors, which should be even from top to bottom.
- Fix the cabinet to the wall and make sure it is square first: a twisted frame makes doors impossible to line up.
Hinges and mounting plates explained. Builds with doors: IKEA BRIMNES wardrobe with 3 doors, IKEA IVAR cabinet, IKEA MICKE desk.
Why doesn't the back panel fit, or the holes don't line up?
- The frame is out of square. Measure both diagonals and push the frame until they match, then fit the back panel.
- Check each panel is the right way round: pre-drilled holes face inwards and the finished edge faces the front, as in the manual's close-ups.
- Some back panels go in a groove before the last panel goes on; others are nailed on at the end. Check which step yours belongs to.
Builds with a nailed back panel: IKEA MALM chest of 3 drawers, IKEA HEMNES 3-drawer dresser, IKEA BRIMNES wardrobe with 3 doors.
I put a panel on the wrong way round. How do I fix it?
- Go back in the reverse order of the steps until you reach the panel: undo cam locks first (turn them back), then screws, then ease the panel off its dowels.
- Compare the panel with the manual: unfinished edges, groove positions and hole patterns show which way round it goes.
- Particleboard tolerates being taken apart a few times, but not many: do it gently and do not over-tighten when you rebuild.
Every guide here lets you jump to any step and rotate the model, so you can check which way round a panel goes before you fix it.
How do I take IKEA furniture apart (to move it)?
- Empty it, take off doors and drawers, and remove the wall fixing first.
- Work in the reverse order of the manual: back panel, then turn each cam lock back (anticlockwise, about half a turn) to release its cam screw, then lift the panels off their dowels.
- Wooden dowels can stay in their holes. Put the fittings in labelled bags per step, and take a photo before you start.
- Large pieces such as PAX wardrobes and beds are easier to move in pieces; small ones (like a KALLAX) can often move whole if you empty and carry them upright.
How cam locks work · wooden dowels.
I lost the manual (or the product is discontinued). Where do I find the instructions?
- Search the product on ikea.com: its page has the assembly instructions as a PDF. The article number (on the label, the box or your receipt) finds the exact product.
- For discontinued products, try the same search, or ask IKEA customer service with the product name and article number.
- Every guide on this site shows the manual code it was built from and links the official PDF.
All guides · Which kind of help to use when.
A part or screw is missing. What now?
- Check every box and all the packaging: small fittings are often taped inside or stuck in a corner of a box.
- Find the part number in the manual's parts list (or the In the box table on our guide). IKEA customer service sends replacement fittings by number.
Which IKEA furniture is easiest and hardest to assemble?
Counting the steps in each official manual: the easiest one-person builds here are IKEA MALMBÄCK display shelf (2 steps), IKEA KVISTBRO storage table (3 steps), IKEA UTTER children's table (3 steps), IKEA UTTER children's stool (3 steps), IKEA FRANKLIN bar stool with backrest, foldable (4 steps). The biggest are IKEA VISTHUS wardrobe (65 steps), IKEA LOMMARP cabinet with glass doors (64 steps), IKEA HEMNES sideboard (61 steps), IKEA KNOXHULT base cabinet with doors and drawer (58 steps), IKEA LOMMARP cabinet (58 steps). More in IKEA assembly by the numbers.
More help
- Furniture hardware explained
- Assembly tips from the official manuals
- Manual, 3D guide, video or paid assembly: which to use when
- All assembly guides
Step by Step Assembly is independent and not affiliated with IKEA. When in doubt, follow your paper manual.