IKEA ALEX drawer unit assembly instructions
How to assemble the IKEA ALEX drawer unit, step by step: 27 animated steps built from the official manual, about 60–90 min for 1 person, with flat & Phillips screwdriver, hammer, Allen key (included).
The 5-drawer ALEX unit in white: a cam-lock carcass with pre-mounted runners, three large and two small drawers, glides, and an optional desktop on top. Size: 36×58×70 cm (14 1/8×22 7/8×27 1/2"). About 60–90 min, 1 person. Tools: Flat & Phillips screwdriver, Hammer, Allen key (included).
Based on the official IKEA manual AA-2242840-5 (PDF). Guide updated .
| Steps | 27 |
|---|---|
| Time | 60–90 min |
| People | 1 |
| Tools | Flat & Phillips screwdriver, Hammer, Allen key (included) |
| Size | 36×58×70 cm (14 1/8×22 7/8×27 1/2") |
| Official manual | AA-2242840-5 |
| IKEA article number | 004.735.46 (white) |
| Pieces in the box | 133 |
In the box
| Part | Part number | Quantity |
|---|---|---|
| Side panel with runners | 2 | |
| Back panel | 1 | |
| Top / bottom panel | 2 | |
| Large drawer: front, 2 sides, back, bottom | 3 | |
| Small drawer: front, 2 sides, back, bottom | 2 | |
| Cam screw | 118331 | 34 |
| Cam lock | 119251 | 18 |
| Cam lock | 103114 | 16 |
| Wooden dowel | 101345 | 16 |
| Screw | 110519 | 20 |
| Screw | 105021 | 10 |
| Screw 110907 (under a desk only) | 4 | |
| Glide | 10061614 | 4 |
| Allen key | 100001 | 1 |
Steps
- Cam screws into the side panels — Work on a rug or the cardboard. Lay both side panels flat with the runners facing up and the edge with the small holes towards each other. Screw 3 cam screws into the holes along that edge of each panel, 6 in total, by hand. Check: Screw in only the threaded part: the ribbed collar must stay above the panel.
- Dowels into the panel ends — Lay the back panel between the two side panels. Push 2 wooden dowels into each end edge of all three panels: 12 in total.
- Side panels onto the back panel — Tip each side panel up onto a long edge of the back panel, runners facing inwards, so the cam screws and dowels go into the holes in the back panel’s edges.
- Lock the back panel — Drop 6 cam locks 119251 into the large holes in the back panel, 3 next to each side panel, and turn each one clockwise with a flat screwdriver until it grips the cam screw. Check: Use the plain cam locks 119251 here. The ones with a cross (103114) are for the drawers.
- Cam screws into the top and bottom panels — Lay the top and bottom panels flat next to the frame, inside face up. Screw 3 cam screws along each long edge of both panels by hand: 12 in total. Check: As in step 1: screw in only the threaded part.
- Top and bottom panels onto the ends — Stand each panel on edge and push it onto an end of the frame so its cam screws and the dowels go into the holes. Look at the hole pattern first: the manual shows one layout for a freestanding unit (or with castors) and one for use under a desk. This guide follows the under-desk layout, where the marked face of the top panel faces up. Check: Freestanding or on castors? Turn the panels as in the left-hand drawing on manual page 8 instead.
- Lock the bottom panel — Fit 6 cam locks 119251 into the large holes on the outside of the bottom panel and turn each one clockwise with a flat screwdriver until it grips. Check: Use the plain cam locks 119251, not the ones with a cross.
- Lock the top panel — Do the same at the other end: 6 cam locks 119251 into the top panel, each turned clockwise to lock.
- Glides, then stand it up — Peel the backing off the 4 glides and press one onto each corner of the bottom panel. Then tip the unit up over its bottom edge so it stands on the glides. Check: Using castors (sold separately)? Fit them instead of the glides, following the castors’ own instructions.
- Large drawers: cam screws in the fronts — Now the three large drawers, which are built the same way. Lay each large front face down on the soft surface and screw 4 cam screws into the small holes on the inside, 12 in total.
- Large drawers: sides onto the fronts — Stand the two sides of each drawer upright on the front, grooves facing inwards and the runner at the bottom, so the cam screws go into the holes in their ends.
- Large drawers: lock the sides — Push a cam lock 103114 into each large hole near the front end of the sides (4 per drawer, 12 in total) and turn it clockwise with a screwdriver until tight. Check: Use the cam locks with a cross (103114) for the drawers.
- Large drawers: slide in the bottoms — Slide a drawer bottom down into the grooves of each drawer, all the way to the front.
- Large drawers: drawer backs — Lower a drawer back between the sides of each drawer, into the slots at the ends. It rests on the drawer bottom.
- Large drawers: screws, then turn them over — Tap 2 screws 110519 through each side into the drawer back with a hammer (4 per drawer, 12 in total). Then turn each drawer over onto its bottom.
- Small drawers: dowels into the sides — Now the two small drawers. Lay out their parts: each front face down with its two sides flat in front of it, grooves up. Push 1 wooden dowel into the front end of each small drawer side, 4 in total.
- Small drawers: cam screws in the fronts — With each small front face down, screw 2 cam screws into the small holes on the inside, 4 in total.
- Small drawers: sides onto the fronts — Stand the sides upright on each front, grooves facing inwards, so the cam screws and dowels go into the holes.
- Small drawers: lock the sides — Push a cam lock 103114 into the large hole of each side (2 per drawer, 4 in total) and turn it clockwise until tight.
- Small drawers: slide in the bottoms — Slide a drawer bottom down into the grooves of each small drawer.
- Small drawers: drawer backs — Lower a drawer back between the sides of each small drawer, into the slots at the ends.
- Small drawers: screws, then turn them over — Tap 2 screws 110519 through each side into the drawer back (4 per drawer, 8 in total), then turn both drawers over onto their bottoms.
- Under a desk: lay on the desktop — Only if ALEX supports a desktop (sold separately). Set up the desk legs. Turn the desktop upside down to find its pre-drilled holes, then turn it back over onto the legs and the unit, with the holes over the unit. Check: Using ALEX on its own? Skip this step and the next one.
- Under a desk: screw on the desktop — From inside the empty unit, screw 4 screws 110907 up through the top panel into the desktop with the Allen key. Check: Using ALEX on its own? The 4 screws are not needed.
- Insert the drawers — Put the 2 small drawers in the top two places and the 3 large drawers below. Hold each drawer level in front of its place, set its runners into the runners in the unit and slide it in. Leave each one pulled out a little for the next step.
- Screw the runners — With each drawer pulled out a little, drive 1 screw 105021 through the drawer runner on each side with a Phillips screwdriver (2 per drawer, 10 in total). Then push the drawers shut.
- Done! — Your ALEX drawer unit is ready. Max load: 4 kg per large drawer and 2 kg per small drawer. Check: Never stack two ALEX units on top of each other.
ALEX drawer unit: questions and answers
How long does it take to assemble the IKEA ALEX drawer unit?
About 60–90 min for 1 person, working through the 27 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.
What tools do I need for the ALEX drawer unit?
Flat & Phillips screwdriver, hammer, Allen key (included). Already in the box: Allen key.
Can one person assemble the ALEX drawer unit?
Yes, it is a one-person build.
What size is the ALEX drawer unit once assembled?
36×58×70 cm (14 1/8×22 7/8×27 1/2"), as given for this model. Leave extra floor space around it while you build.
How many screws and fittings come with the ALEX drawer unit?
118 fittings of 7 kinds, the most numerous being 34 × cam screw, 20 × screw, 18 × cam lock. The In the box table lists every one with its part number, so you can count them before you start.
Where can I download the IKEA ALEX drawer unit assembly instructions PDF?
The official PDF is manual AA-2242840-5, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 004.735.46 (white); other colours have their own numbers but usually the same manual.
Which IKEA manual is this guide based on?
The official manual AA-2242840-5. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.
What if a part or screw is missing?
Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example cam screw 118331). IKEA customer service can send replacement fittings using that number.
Related assembly guides
- IKEA ALEX desk assembly instructions
- IKEA ALEX drawer unit on castors assembly instructions
- IKEA ALEX drawer unit with 9 drawers assembly instructions
- IKEA HEMNES 3-drawer dresser assembly instructions
- IKEA MALM chest of 3 drawers assembly instructions
- IKEA LENNART drawer unit assembly instructions
- IKEA MALM dressing table assembly instructions
- IKEA BRIMNES bedside table assembly instructions
All IKEA ALEX assembly guides · All dressers & drawers assembly guides · All furniture assembly guides
Stuck on a step? Common assembly problems and fixes · Furniture hardware explained