Step by StepAssembly Find your furniture

IKEA ALEX drawer unit with 9 drawers assembly instructions

How to assemble the IKEA ALEX drawer unit with 9 drawers, step by step: 30 animated steps built from the official manual, about 2–3 hours for 1 person, with Phillips screwdriver, flat screwdriver, hammer, pencil, Allen key (included), drill and a wall fixing to suit your wall.

IKEA ALEX drawer unit with 9 drawers, assembled

The tall, narrow 9-drawer ALEX unit in white: a cam-lock carcass built lying on its back, five small and four large drawers on pre-mounted runners, and a safety strap to the wall. Size: 36×48×116 cm (14 1/8×18 7/8×45 5/8"). About 2–3 hours, 1 person. Tools: Phillips screwdriver, Flat screwdriver, Hammer, Pencil, Allen key (included), Drill and a wall fixing to suit your wall.

Based on the official IKEA manual AA-2738690-1 (PDF). Guide updated .

ALEX drawer unit with 9 drawers: quick facts
Steps30
Time2–3 hours
People1
ToolsPhillips screwdriver, Flat screwdriver, Hammer, Pencil, Allen key (included), Drill and a wall fixing to suit your wall
Size36×48×116 cm (14 1/8×18 7/8×45 5/8")
Official manualAA-2738690-1
IKEA article number904.861.39 (white)
Pieces in the box178

In the box

PartPart numberQuantity
Side panel with 9 runners2
Back panel1
Top panel1
Bottom panel1
Small drawer: front, 2 sides, bottom, back5
Large drawer: front, 2 sides, bottom, back4
Cam screw11833138
Cam lock11925112
Cam lock10311426
Wooden dowel10134522
Screw1002146
Screw11051936
Screw10502118
Glide1193634
Safety fitting kit 105867 (strap, screw, washers)1
Allen key1000011

Steps

  1. Cam screws into the side panels — Work on a rug or the empty box. Lay the back panel flat with a side panel on each side of it, runners facing up and the edge with the small holes towards the back panel. Screw 3 cam screws 118331 into the holes along that edge of each side panel, 6 in total. Check: Screw in only the threaded part: the ribbed collar must stay above the panel.
  2. Side panels onto the back panel — Push 2 wooden dowels 101345 into each long edge of the back panel (4 in total). Stand each side panel up on its back edge, runners facing in, and push it onto the back panel so the dowels and cam screws go into the holes.
  3. Lock the back panel — Put 6 cam locks 119251 into the large holes in the back panel, 3 next to each side panel, and turn each one clockwise with a flat screwdriver until it grips the cam screw. Check: Use the plain cam locks 119251 here. The ones with a cross (103114) are for the drawers.
  4. Cam screws into the top panel — Lay the top panel beyond the top end of the frame, underside up, with the notched edge towards the frame. Screw 6 cam screws 118331 into the holes along its two long edges, 3 on each side. Check: The small notch in the middle of one edge is at the back: the safety strap goes through it later.
  5. Top panel onto the frame — Push 2 wooden dowels 101345 into the top end of each side panel (4 in total). Tip the top panel up onto its notched edge and push it onto the top end of the frame, so the cam screws and dowels go into the holes.
  6. Lock the top panel — Fit 6 cam locks 119251 into the large holes in the side panels next to the top, 3 on each side, and turn each one clockwise with a flat screwdriver until it grips. Check: Again the plain cam locks 119251, not the ones with a cross.
  7. Bottom panel onto the frame — Push 2 wooden dowels 101345 into the bottom end of each side panel (4 in total), then push the bottom panel onto that end so the dowels go into its holes.
  8. Screw the bottom panel — Fix the bottom panel with 6 screws 100214, 3 into the end of each side panel, using the Allen key 100001.
  9. Glides — Tap a glide 119363 into each of the 4 holes near the corners of the bottom panel with a hammer.
  10. Stand the unit up — Tip the unit up over its bottom edge so it stands on its glides, open front towards you.
  11. Mark the wall — Stand the unit against the wall where it will stay. Make a pencil mark on the wall at the middle of the back edge of the top. Check: ALEX must be fixed to the wall so it cannot tip over. Check for pipes and cables before you drill.
  12. Strap onto the wall — Move the unit aside. 5 cm below the mark, drill a hole and fit a plug (use fixings that suit your wall). Hold the strap from kit 105867 flat on the wall, free end up, and screw it on through its hole with a washer. Check: The kit does not include the wall fixing: different walls need different plugs and screws. Ask your local hardware shop if unsure.
  13. Strap through the top panel — Bring the unit back in front of the strap. Fold the free end of the strap forward, then push the unit back against the wall so the strap goes through the notch in the back edge of the top panel.
  14. Screw the strap to the top — From inside the empty unit, pull the strap tight under the top panel and screw it to the underside of the top with the screw and washer from the kit. Check: Never let children climb on the unit or hang on open drawers.
  15. Small drawers: cam screws in the fronts — The 5 small drawers are built the same way. Lay each small drawer front face down, finger grip towards you, and screw 2 cam screws 118331 into the small holes on the inside: 10 in total.
  16. Small drawers: sides onto the fronts — Push a wooden dowel 101345 into the front end of each drawer side. Stand the sides on the ends of each front, grooves facing in, so the dowel and the cam screw go into the holes: 10 sides and 10 dowels.
  17. Small drawers: lock the sides — Push a cam lock 103114 into the large hole near the front of each drawer side and turn it clockwise with a flat screwdriver until it is tight: 2 per drawer, 10 in total. Check: Use the cam locks with a cross (103114) for the drawers.
  18. Small drawers: slide in the bottoms — Slide a drawer bottom down into the grooves of each small drawer, all the way to the front. Check: The bottom must sit in the grooves of both sides and of the front.
  19. Small drawers: backs and screws — Push a drawer back down into the slots at the ends of the sides of each small drawer. Tap 2 screws 110519 through each side into the back with a hammer: 4 per drawer, 20 in total.
  20. Large drawers: cam screws in the fronts — Now the 4 large drawers. Lay each large front face down, finger grip towards you, and screw 4 cam screws 118331 into the small holes on the inside, 2 at each end: 16 in total.
  21. Large drawers: sides onto the fronts — Stand the two sides of each large drawer on the ends of its front, grooves facing in, so the cam screws go into the holes. These sides have no dowels.
  22. Large drawers: lock the sides — Push 2 cam locks 103114 into the large holes near the front of each side and turn them clockwise with a flat screwdriver until tight: 4 per drawer, 16 in total.
  23. Large drawers: slide in the bottoms — Slide a drawer bottom down into the grooves of each large drawer, all the way to the front.
  24. Large drawers: backs and screws — Push a drawer back down into the slots at the ends of the sides of each large drawer and tap 2 screws 110519 through each side into it with a hammer: 4 per drawer, 16 in total.
  25. First drawer onto its runners — Small drawers go in the top 5 places. Pull out the inner parts of the top pair of runners. Hold the drawer square in front of its opening, slide it straight onto the runners and fix it with 1 screw 105021 through each runner. Then push it in.
  26. Small drawers 2 and 3 — Fit the next two small drawers the same way, working downwards: runners out, drawer square to its opening and slid on, 2 screws 105021, push it in.
  27. Small drawers 4 and 5 — Fit the last two small drawers the same way, each with 2 screws 105021.
  28. Large drawers 1 and 2 — The 4 large drawers go in the bottom 4 places. Fit them in the same way, from the top down, each with 2 screws 105021.
  29. Large drawers 3 and 4 — Fit the last two large drawers, each with 2 screws 105021.
  30. Done! — Your ALEX drawer unit is finished and fixed to the wall. Max. load: 1 kg in each small drawer and 3 kg in each large drawer. Check: Open only one drawer at a time.

ALEX drawer unit with 9 drawers: questions and answers

How long does it take to assemble the IKEA ALEX drawer unit with 9 drawers?

About 2–3 hours for 1 person, working through the 30 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the ALEX drawer unit with 9 drawers?

Phillips screwdriver, flat screwdriver, hammer, pencil, Allen key (included), drill and a wall fixing to suit your wall. Already in the box: Allen key.

Can one person assemble the ALEX drawer unit with 9 drawers?

Yes, it is a one-person build.

Does the ALEX drawer unit with 9 drawers need to be fixed to the wall?

The manual shows a wall fixing: see step 11 (Mark the wall) and step 30 (Done). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.

What size is the ALEX drawer unit with 9 drawers once assembled?

36×48×116 cm (14 1/8×18 7/8×45 5/8"), as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the ALEX drawer unit with 9 drawers?

162 fittings of 8 kinds, the most numerous being 38 × cam screw, 36 × screw, 26 × cam lock. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA ALEX drawer unit with 9 drawers assembly instructions PDF?

The official PDF is manual AA-2738690-1, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 904.861.39 (white); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-2738690-1. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example cam screw 118331). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All IKEA ALEX assembly guides · All dressers & drawers assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained