Dressers & drawers assembly instructions
Chests of drawers and drawer units. A cam-lock carcass, then one drawer box at a time on runners.
- IKEA HEMNES 3-drawer dresser assembly instructions — 47 steps, about 2–3 hours. Solid pine dresser with a frame-and-panel look: two side frames, front rails, a drawer interlock, 3 drawers on runners and wall anchoring.
- IKEA MALM chest of 3 drawers assembly instructions — 41 steps, about 2–3 hours. The classic MALM dresser: a cam-lock frame on a plinth, a nailed-on back panel, wall anchoring and three drawers on runners.
- IKEA ALEX drawer unit assembly instructions — 27 steps, about 60–90 min. The 5-drawer ALEX unit in white: a cam-lock carcass with pre-mounted runners, three large and two small drawers, glides, and an optional desktop on top.
- IKEA LENNART drawer unit assembly instructions — 14 steps, about 30–45 min. The slim LENNART drawer unit in white: a steel tube frame with a mesh top, two castors at the back and three mesh drawers folded from flat and clicked together.
- IKEA MALM dressing table assembly instructions — 26 steps, about 1–2 hours. A high-gloss MALM dressing table: thick leg panels bolted to the top, a loose glass plate held by clips, wall anchoring and one wide drawer on concealed runners.
- IKEA BRIMNES bedside table assembly instructions — 28 steps, about 1–1.5 hours. A small white BRIMNES bedside table: a cam-lock frame built lying down, a nailed-on back, an open shelf, and a drawer with a frosted-glass front on runners.
- IKEA ALEX drawer unit on castors assembly instructions — 20 steps, about 90–120 min. The wide, low 6-drawer ALEX unit on castors in white, made to roll under a desk: a cam-lock carcass with pre-mounted runners, six identical drawers and four castors.
- IKEA STORKLINTA chest of 2 drawers assembly instructions — 28 steps, about 1–1.5 hours. A small white chest of 2 drawers that clicks together: pins drop into keyhole slots, the back slides into grooves, and the drawers run on wheeled runners.
- IKEA EKET cabinet with 2 drawers assembly instructions — 29 steps, about 1–1.5 hours. White EKET cabinet with two push-to-open drawers: four mitred panels that hook together without screws, a slide-in back panel held by clips, full-extension runners and wall fixing with adjustable spacers.
- IKEA BRIMNES dressing table assembly instructions — 53 steps, about 2–3 hours. A white BRIMNES dressing table: a cam-lock frame built lying down, a drawer on runner rails, and a mirror lid on concealed hinges with a lid stay over a divided storage compartment.
- IKEA VIKHAMMER bedside table assembly instructions — 18 steps, about 1–1.5 hours. A white VIKHAMMER bedside table: a cam-lock box built upside down, a steel leg frame bolted on, and a drawer on full-extension runners above an open shelf.
- IKEA BESTÅ drawer frame assembly instructions — 16 steps, about 15–20 min. Drawer for a BESTÅ frame: a click-together box with corner profiles, a slide-in bottom, a cam-locked BESTÅ front and couplings for the drawer runners.
- IKEA BRIMNES chest of 4 drawers assembly instructions — 40 steps, about 2.5–3.5 hours. A tall white BRIMNES chest: a cam-lock frame with four back boards built lying on its side, fixed to the wall, and four drawers with frosted-glass fronts on runners.
- IKEA ALEX drawer unit with 9 drawers assembly instructions — 30 steps, about 2–3 hours. The tall, narrow 9-drawer ALEX unit in white: a cam-lock carcass built lying on its back, five small and four large drawers on pre-mounted runners, and a safety strap to the wall.
- IKEA MALM chest of 2 drawers assembly instructions — 23 steps, about 1–1.5 hours. The small MALM bedside chest: a cam-lock frame built on its side, a nailed-on back panel and two drawers on wheeled runners.
- IKEA GURSKEN chest of 3 drawers assembly instructions — 31 steps, about 1.5–2.5 hours. A light beige GURSKEN chest: a screwed frame built lying on its front, a nailed-on back, wall anchoring and three knob drawers that slide on plastic runners.
- IKEA BRIMNES chest of 3 drawers assembly instructions — 40 steps, about 2–3 hours. A white BRIMNES chest of 3 drawers: a cam-lock frame with three back boards and a bottom back rail built lying on its side, fixed to the wall, and three drawers with frosted-glass fronts on runners.
- IKEA KNOXHULT base cabinet with doors and drawer assembly instructions — 58 steps, about 2–3 hours. A 120 cm white KNOXHULT kitchen base cabinet with its worktop: a dowelled and bolted frame built lying on its front, a nailed-on back, wall fixing, two hinged doors, two shelves and a drawer on runners.
- IKEA IDÅSEN cabinet with doors and drawers assembly instructions — 45 steps, about 2–3 hours. A dark green steel office cabinet: two side frames joined on leg frames lying down, a fixed middle shelf and divider, two steel drawers built from hook-together panels, two shelves on clips and two doors on clip-on hinges.
- IKEA TROTTEN drawer unit w 3 drawers on castors assembly instructions — 23 steps, about 1–1.5 hours. A white steel drawer unit on castors: runners screwed to the side panels, two bottom rails that click in, a slide-in back, a hooked-on top, four castors and three drawers, the middle one with a lock.
- IKEA MICKE drawer unit with drop-file storage assembly instructions — 35 steps, about 2–3 hours. Narrow white MICKE drawer unit on castors: three small drawers on roller runners over a deep drop-file drawer on full-extension ball-bearing runners, with its own castor under the front.
- IKEA IDANÄS bedside table assembly instructions — 33 steps, about 1.5–2 hours. A white bedside table on a separate leg frame with an open shelf and a drawer: the cam-lock carcass is built lying down, the moulded top hooks on, it is finished upside down and the drawer runs on full-extension runners.
- IKEA NORDKISA bedside table assembly instructions — 14 steps, about 40 min. A light bamboo bedside table with a slatted bottom shelf, an open shelf and a loose drawer that rests on two rails, built from two ready-made side frames with 16 Allen screws, then topped and finished with a screwed-together drawer.
- IKEA SMUSSLA bedside table/shelf unit assembly instructions — 17 steps, about 30–45 min. White children’s bedside table and shelf unit: a dowelled box with a slide-in divider and shelf held by wire supports, four legs and soft caps.
- IKEA STORKLINTA chest of 6 drawers assembly instructions — 40 steps, about 2.5–3.5 hours. A wide white chest of 6 drawers that clicks together: pins drop into keyhole slots, folding backs slide into grooves, and an interlock lets only one drawer open at a time.
- IKEA KNARREVIK bedside table assembly instructions — 9 steps, about 15–20 min. Small black steel bedside table: four angle-iron legs screwed to a top tray and a shelf tray with one Allen key.
- IKEA HAUGA bedside table assembly instructions — 26 steps, about 1–1.5 hours. A white bedside table with one drawer under the top and an open space below: the carcass clicks together lying on its front, stands up, then the drawer is built on its front and slid in on its runners.
- IKEA GULLABERG bedside table assembly instructions — 27 steps, about 50 min. A white GULLABERG bedside table on four tapered legs, with a drawer on roller runners and an open shelf below, built from two ready-made side frames joined by rails and cam locks.
Assembling dressers & drawers: the numbers
Counted from the 28 guides in Dressers & drawers, each built from its official manual.
| Guides | 28 |
|---|---|
| Steps | 9 to 58 (typically 28) |
| Time | about 15–20 min (BESTÅ drawer frame) to about 2.5–3.5 hours (STORKLINTA chest of 6 drawers) |
| Fittings per build | 16 to 209 (typically 87) |
| Planned for two people | 8 of 28 |
| Wall fixing in the manual | 13 of 28 |
| Most common tools | Phillips screwdriver (19), Hammer (17), Flat-blade screwdriver (12), Pencil (10) |
| Allen key supplied | 12 of 28 |
Fittings in dressers & drawers boxes
The kinds of fitting these manuals use most. What each one does: furniture hardware explained.
| Fitting | Guides | Total |
|---|---|---|
| Screws | 27 of 28 | 866 |
| Cam screws and connectors | 23 of 28 | 392 |
| Cam locks | 21 of 28 | 386 |
| Wooden dowels | 20 of 28 | 421 |
| Feet, glides and castors | 20 of 28 | 104 |
| Pins and plugs | 15 of 28 | 132 |
What the dressers & drawers manuals warn about
Notes from the official manuals, at the step where they apply.
- Use the short dowels 101350 here, not the long 101353. (HEMNES 3-drawer dresser, step 2)
- Check the board’s orientation: the round cam lock holes face the top end of the chest and sit at the back edge, as the manual’s right/wrong drawing shows. (MALM chest of 3 drawers, step 8)
- Use the plain cam locks 119251, not the ones with a cross. (ALEX drawer unit, step 7)
- Check the edges: the folded lips must point down (manual page 6). With the lips up, the drawer can’t be assembled. (LENNART drawer unit, step 7)
- Use the large dowels 101353 here, not the small 101345 (those are for the drawer). (MALM dressing table, step 3)
- The runners are marked L and R: the one marked R goes on the right-hand side panel. (BRIMNES bedside table, step 2)
Dressers & drawers by IKEA range
Ranges with more than one guide: each page compares the models and the fittings they share.
Dressers & drawers: questions and answers
How long does it take to assemble dressers & drawers?
In these 28 guides, from about 15–20 min for the BESTÅ drawer frame to about 2.5–3.5 hours for the STORKLINTA chest of 6 drawers. Each guide gives its own estimate for the planned number of people.
Can one person assemble dressers & drawers?
20 of the 28 dressers & drawers guides here are one-person builds; 8 are planned for two people, usually for the steps where a large part is lifted, turned or stood up.
What tools do I need for dressers & drawers?
Most often Phillips screwdriver (19 of 28), hammer (17 of 28), flat-blade screwdriver (12 of 28) and pencil (10 of 28). Each guide lists exactly what it needs.
Do dressers & drawers need to be fixed to the wall?
13 of the 28 manuals include a wall fixing. Furniture that can tip over must be fixed as its manual shows; use screws and plugs that suit your wall.