Step by StepAssembly Find your furniture

IKEA KNARREVIK bedside table assembly instructions

How to assemble the IKEA KNARREVIK bedside table (nightstand), step by step: 9 animated steps built from the official manual, about 15–20 min for 1 person, with Allen key (included).

IKEA KNARREVIK bedside table, assembled

Small black steel bedside table: four angle-iron legs screwed to a top tray and a shelf tray with one Allen key. Size: 37x28x45 cm. About 15–20 min, 1 person. Tools: Allen key (included).

Based on the official IKEA manual AA-2547698-1 (PDF). Guide updated .

KNARREVIK bedside table: quick facts
Steps9
Time15–20 min
People1
ToolsAllen key (included)
Size37x28x45 cm
Official manualAA-2547698-1
IKEA article number005.763.18 (black)
Pieces in the box23

In the box

PartPart numberQuantity
Top1
Shelf1
Leg4
Screw1011849016
Allen key1000061

Steps

  1. Screw the first leg to the shelf — Stand the shelf on one long edge. Fit a leg over its upper corner so the two flanges hug the rims, with the leg's pre-drilled top end on the left. Put in one screw through each flange with the Allen key, only loosely. Check: Leave every screw loose until step 6: the head must not press flat against the leg yet.
  2. Add the second leg — With the first leg now lying on the floor, fit the second leg over the upper corner of the same long side. Put in its two screws loosely with the Allen key, then turn the shelf so both legs lie on the floor. Check: Screws stay loose for now.
  3. Add the last two legs — Fit the two remaining legs over the upper corners of the shelf, top ends on the same side as the first two. Fix each with two screws, loosely, using the Allen key. Check: Screws stay loose for now.
  4. Slide in the top — Slide the top in between the top ends of the four legs, rims first, until its corners line up with the holes at the leg ends.
  5. Screw the top to the upper legs — Fix the top to the two legs on top with two screws each, one through each flange, loosely. Then turn the table over onto the other two legs. Check: Screws stay loose for now.
  6. Screw the top to the other legs — Fix the top to the two legs now on top, two screws each, loosely. Then stand the table up on its feet. Check: Screws stay loose for now.
  7. Tighten the front and left screws — Check that all four legs stand straight and square to the top, then tighten the screws firmly with the Allen key. Start with the eight on the front and left side. Check: Legs must be parallel: if one splays out, loosen its screws, push it straight and tighten again.
  8. Tighten the back and right screws — Turn the table round and tighten the other eight screws the same way, so all 16 are firm.
  9. Done! — Your KNARREVIK bedside table is ready. Do not sit or stand on it; it holds up to 10 kg on top.

KNARREVIK bedside table: questions and answers

How long does it take to assemble the IKEA KNARREVIK bedside table?

About 15–20 min for 1 person, working through the 9 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the KNARREVIK bedside table?

Allen key (included). Already in the box: Allen key.

Can one person assemble the KNARREVIK bedside table?

Yes, it is a one-person build.

What size is the KNARREVIK bedside table once assembled?

37x28x45 cm, as given for this model. Leave extra floor space around it while you build.

Where can I download the IKEA KNARREVIK bedside table assembly instructions PDF?

The official PDF is manual AA-2547698-1, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 005.763.18 (black); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-2547698-1. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example screw 10118490). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All dressers & drawers assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained