How to assemble IKEA furniture tools, time and tips
Across our 190 guides, each rebuilt from the official IKEA manual, the most common tool is a Phillips screwdriver (64% of builds), 29% are planned for two people and 45% include fixing the furniture to the wall. The manuals’ own warnings come down to a few habits: use the right fitting, check which way a part faces, and don’t tighten too soon or too hard.
Before you open the box
- Find the manual code on your paper manual (for example AA-2289108-3) and check it matches the one on the guide: manuals change over time.
- Unpack everything and sort the fittings by part number. Each guide’s In the box list has every part with its count, so you know nothing is missing before you start.
- Clear floor space and work on a rug or the flattened box: 53 notes in 51 manuals here say to protect the surface.
- Read the whole guide once. Steps that need two people, a wall fixing or a part turned the right way are easier when you know they are coming.
Which tools you need
Counted across 190 guides. 12 need no tools at all. 111 need an Allen key, and every one of them has it in the box, so you rarely need to buy one. See the assembly statistics for the full numbers.
| Tool | Guides that need it | Share |
|---|---|---|
| Phillips screwdriver | 122 | 64% |
| Allen key | 111 | 58% |
| Flat-blade screwdriver | 91 | 48% |
| Hammer | 68 | 36% |
| Pencil | 44 | 23% |
| Drill | 39 | 21% |
| Spirit level | 34 | 18% |
| Wrench or spanner | 16 | 8% |
| Step ladder | 7 | 4% |
How long it takes
Quickest and longest build in each category, as estimated in each guide for the planned number of people. Allow longer the first time.
| Category | Guides | Quickest | Longest |
|---|---|---|---|
| Bookcases & shelves | 54 | TISKEN corner shelf unit with suction cup, 5 min | LOMMARP cabinet with glass doors, 4–5 hours |
| Tables | 19 | KVISTBRO storage table, 5 min | BILLY bookcase with foldable table, 2–3 hours |
| Chairs & stools | 43 | FRANKLIN bar stool with backrest, foldable, 5 min | BYÅS TV bench, 2–3 hours |
| Desks | 4 | ÖRFJÄLL children's desk chair, 15–20 min | MICKE desk, 2–3 hours |
| Wardrobes | 8 | PAX wardrobe frame, 30–45 min | VISTHUS wardrobe, 4–6 h |
| Dressers & drawers | 28 | BESTÅ drawer frame, 15–20 min | STORKLINTA chest of 6 drawers, 2.5–3.5 hours |
| Beds | 11 | SNIGLAR cot, 30–45 min | HEMNES day-bed frame with 3 drawers, 4–5 hours |
| Hallway | 6 | TRONES shoe cabinet/storage, 10–15 min | STÄLL shoe cabinet with 4 compartments, 2–3 hours |
| Kitchen & carts | 11 | VESKEN trolley, 10 min | TORNVIKEN kitchen island, 1.5–2.5 hours |
| Kids | 6 | UTTER children's table, 5 min | GULLIVER changing table, 45–60 min |
One person or two?
55 of 190 guides are planned for two people, most often in wardrobes (100%), beds (82%) and bookcases & shelves (33%): large parts that have to be lifted, turned over or stood up. One person can do most steps of those builds too; get help where the manual says so.
- Two people recommended. (BILLY bookcase, step 9)
- Two people recommended for standing the desk up. (MICKE desk, step 30)
- Two people needed. Do not cut the straps with scissors or a knife and do not lift the pack by the straps. (PAX wardrobe frame, step 1)
- Two people needed: keep the frame upright while you unfold it. (PAX wardrobe frame, step 3)
The mistakes the manuals warn about
The manuals behind these guides carry 1008 notes at specific steps. Most are about the same few things.
| Warning | Notes | Manuals |
|---|---|---|
| Use the right fitting | 148 | 59 |
| Which way round | 106 | 70 |
| Don’t tighten too soon or too hard | 50 | 28 |
| Check before you go on | 69 | 58 |
- Use the cam lock 103114 here, not 110126 or 103430. (MICKE desk, step 3)
- Use the 100215 connector screws here, not the long thin 122824 screws. Tighten until the head sits flush with the leg. (BEKVÄM step stool, step 1)
- If the large holes of the top board face inwards, turn it round. (BILLY bookcase, step 5)
- Check the board’s orientation: the round cam lock holes face the top end of the chest and sit at the back edge, as the manual’s right/wrong drawing shows. (MALM chest of 3 drawers, step 8)
- Hand-tight only: you tighten it with the wrench in step 4. (MARIUS stool, step 1)
- Do not tighten the screws fully yet; leave them slightly loose until step 7. (NISSAFORS trolley, step 5)
- Check the profiled edge: it must be at the front of the bookcase. (BRIMNES bookcase, step 8)
- Check the number next to the tab: 1 for the bottom basket, 2 for the middle one, 3 for the top one. (RÅSKOG trolley, step 3)
Fix tall furniture to the wall
85 of 190 manuals include a wall fixing against tipping over, most often in wardrobes (100%), bookcases & shelves (87%) and hallway (83%). The wall fitting is usually in the box, but 62 manuals say the wall screws and plugs are not included, because the right ones depend on your wall.
- Must be fixed to the wall to prevent tip-over. Wall screws and plugs are not included. (BILLY bookcase, step 11)
- Tip-over danger: this unit must be fixed to the wall. Never leave it standing upright without the wall fixing. (KALLAX shelf unit 2x4, step 16)
- Wall screws and plugs are not included: choose ones made for your wall material. Do not drive the screws all the way in. (KALLAX shelf unit 2x4, step 18)
- Wall screws are not included. Use countersunk (flat-head) screws, not round-head screws. (BEKVÄM step stool, step 10)
Assembly questions
What tools do I need to assemble IKEA furniture?
In our 190 guides the most common are Phillips screwdriver (122 guides), Allen key (111 guides), flat-blade screwdriver (91 guides) and hammer (68 guides). When an Allen key is needed it comes in the box (all 111 builds that use one). Each guide lists exactly what it needs.
Can I assemble IKEA furniture by myself?
Most of it, yes: 135 of our 190 guides are one-person builds. The rest are planned for two people because a heavy or tall part has to be lifted, turned or held.
How long does IKEA assembly take?
In our 190 guides, from about 5 min (KVISTBRO storage table) to about 4–6 h (VISTHUS wardrobe). Every guide shows its own estimate for the planned number of people; the table above has the range per category.
Should I tighten every screw fully as I go?
Not always. Where a manual says hand-tight or loosely, leave it so the parts can settle, and tighten everything in the later step it names. Elsewhere, tighten until snug, not as hard as you can: particleboard strips easily.
I put a panel in the wrong way round. What now?
Undo the step: turn the cam locks back, take the panel off and turn it. The orientation notes in the manuals (finished edge to the front, holes facing in) are the most common fix. Nails and expansion dowels are hard to undo, so check before using them.