Step by StepAssembly Find your furniture

IKEA BEKVÄM step stool assembly instructions

How to assemble the IKEA BEKVÄM step stool, step by step: 13 animated steps built from the official manual, about 20–30 min for 1 person, with Allen key 100092 + handle 121030 (included), drill/screwdriver for the wall hook.

IKEA BEKVÄM step stool, assembled

Folding beech step stool with two steps and a slatted top step: front legs, hinges, a back leg frame and two locking stays, plus a wall hook to hang it up. Size: 44×63 cm (17 3/8×24 3/4"), folds to 21 cm. About 20–30 min, 1 person. Tools: Allen key 100092 + handle 121030 (included), Drill/screwdriver for the wall hook.

Based on the official IKEA manual AA-2267892-3 (PDF). Guide updated .

BEKVÄM step stool: quick facts
Steps13
Time20–30 min
People1
ToolsAllen key 100092 + handle 121030 (included), Drill/screwdriver for the wall hook
Size44×63 cm (17 3/8×24 3/4"), folds to 21 cm
Official manualAA-2267892-3
IKEA article number504.846.70 (beech)
Pieces in the box37

In the box

PartPart numberQuantity
Front leg with top bracket2
Step2
Top step1
Back leg frame1
Stay L1221281
Stay R1221481
Hinge1221272
Wall hook1221321
Connector screw1002154
Screw10918012
Screw1228244
Washer1100974
Allen key1000921
Allen-key handle1210301

Steps

  1. Two steps onto the first leg — Lay one front leg on its back with the bracket end pointing up. Push the two steps into its grooves, rounded front edge towards the leg’s front. Fix each step with a connector screw 100215 through the outside of the leg. Slide the allen key into its handle and tighten. Check: Use the 100215 connector screws here, not the long thin 122824 screws. Tighten until the head sits flush with the leg.
  2. Second front leg — Fit the second front leg onto the other ends of the steps and fix it with 2 more connector screws 100215.
  3. Hinges onto the front legs — Place a hinge 122127 in the inside corner at the top of each front leg, the leaf pointing past the end of the bracket. Fix each hinge with 2 screws 109180.
  4. Screw on the top step — Hold the top step against the ends of the two brackets, BEKVÄM label on the underside. Fix it with 4 long screws 122824 through the hinges and brackets.
  5. Turn it upside down — Stand the stool upside down on its top step and fold both hinge leaves up.
  6. Attach the back leg frame — Set the back leg frame (the one with the X brace) against the two hinge leaves and fix each leaf with 2 screws 109180.
  7. Stand it upright — Turn the stool over and stand it on its four legs.
  8. Fit the left stay (L) — The stay marked L (122128) goes on the left side. Put a washer 110097 between the stay and the leg at each end and fix it with screws 109180 to the front leg and the back leg. Check: STOP: do not overtighten. Tighten until the screw stops, then turn it back slightly so the stay can still fold.
  9. Fit the right stay (R) and lock — Fit the stay marked R (122148) on the right side the same way. To lock the stool open, push each stay down straight and press its clip down over the joint. Check: STOP: do not overtighten, the stays must still fold. Max load 100 kg (220 lb).
  10. Wall hook for storage — Screw the wall hook 122132 to the wall at least 70 cm (27 1/2") above the floor, with 2 countersunk screws that suit your wall. Check: Wall screws are not included. Use countersunk (flat-head) screws, not round-head screws.
  11. Fold it and hang it up — To store the stool, lift the clips, fold the back legs in against the front legs and hang the stool on the hook by the slot under the top step.
  12. Unfold and lock the stays — To use it, lift the stool off the hook, pull the back legs out and push each stay down until it is straight, then press its clip down over the joint to lock it. Check: Always check that both stays are locked before you step on the stool.
  13. Done! — Your BEKVÄM step stool is ready. Max load 100 kg (220 lb). Check the screws now and then and re-tighten them if needed.

BEKVÄM step stool: questions and answers

How long does it take to assemble the IKEA BEKVÄM step stool?

About 20–30 min for 1 person, working through the 13 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the BEKVÄM step stool?

Allen key 100092 + handle 121030 (included), drill/screwdriver for the wall hook. Already in the box: Allen key 100092 + handle 121030.

Can one person assemble the BEKVÄM step stool?

Yes, it is a one-person build.

What size is the BEKVÄM step stool once assembled?

44×63 cm (17 3/8×24 3/4"), folds to 21 cm, as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the BEKVÄM step stool?

30 fittings of 9 kinds, the most numerous being 12 × screw, 4 × connector screw, 4 × screw. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA BEKVÄM step stool assembly instructions PDF?

The official PDF is manual AA-2267892-3, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 504.846.70 (beech); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-2267892-3. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example stay l 122128). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All IKEA BEKVÄM assembly guides · All chairs & stools assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained