Chairs & stools assembly instructions
Stools, step stools and children’s chairs. Small builds where the order of the screws matters.
- IKEA MARIUS stool assembly instructions — 6 steps, about 10–15 min. Steel-frame stool: two U-shaped leg frames bolted together, then screwed to the seat.
- IKEA BEKVÄM step stool assembly instructions — 13 steps, about 20–30 min. Folding beech step stool with two steps and a slatted top step: front legs, hinges, a back leg frame and two locking stays, plus a wall hook to hang it up.
- IKEA LÄTT children's table with 2 chairs assembly instructions — 25 steps, about 30–45 min. A small pine-and-white table with two matching chairs for children: every piece is a frame of slot-together rails held by 4 bolts, with the white top or seat sliding into grooves.
- IKEA STIG bar stool with backrest assembly instructions — 17 steps, about 25–35 min. A white steel-tube counter stool: two leg frames joined by rails, a backrest on two tubes, a footrest, and a moulded seat that clicks on.
- IKEA FRANKLIN bar stool with backrest, foldable assembly instructions — 4 steps, about 5 min. Foldable steel bar stool with backrest: it comes folded and ready, you only screw the footrest on with 2 screws, then unfold it until it clicks.
- IKEA MAMMUT children's stool assembly instructions — 4 steps, about 5 min. A chunky moulded-plastic stool for children, for indoors or out: four push-in legs click into the seat, no tools or screws.
- IKEA BRIMNES TV bench assembly instructions — 46 steps, about 2–3 hours. A black BRIMNES TV bench: a cam-lock frame built lying on its front, a nailed-on back, fixed to the wall, and two framed drawers on runners under two open compartments.
- IKEA BESTÅ TV bench assembly instructions — 25 steps, about 1–1.5 hours. Long, low BESTÅ TV bench with three open compartments: a cam-lock frame built upside down, two back panels with a cable opening in the middle, adjustable feet and wall fixing.
- IKEA TROGEN children's step stool assembly instructions — 10 steps, about 20 min. A sturdy two-step stool in bright yellow that helps children reach the sink: two side panels with carry handles, two steps and two front rails, held by dowels and 8 bolts.
- IKEA TOBIAS chair assembly instructions — 4 steps, about 10–15 min. Cantilever chair: a clear polycarbonate seat shell screwed onto a chrome-plated steel tube base with 4 screws.
- IKEA KYRRE stool assembly instructions — 5 steps, about 10 min. A light birch stool with a rounded triangular seat: three bent birch-veneer legs screw to the underside of the seat.
- IKEA PERJOHAN stool with storage assembly instructions — 13 steps, about 20–30 min. A solid pine stool with a hand-grip slot in the seat and a low trough between the legs for magazines or shoes, held together with dowels and 12 screws.
- IKEA STRANDMON wing chair assembly instructions — 17 steps, about 30–45 min. Upholstered wing chair: the seat frame bolts onto the backrest, four wooden legs screw in, and two arm-and-wing panels hook onto the backrest and bolt to the seat.
- IKEA TEODORES chair assembly instructions — 16 steps, about 20–30 min. Stackable dining chair: two powder-coated steel side frames joined by three cross rails, with a moulded plastic backrest and seat.
- IKEA TJUSIG bench with shoe storage assembly instructions — 16 steps, about 30–45 min. White hallway bench with two shoe shelves of steel rods: two ready-made end frames joined by wooden rails, rods and bolts, built standing on end, with the seat screwed on last.
- IKEA JANINGE bar stool assembly instructions — 13 steps, about 20–30 min. A white height-adjustable bar stool: a gas spring bolted to a round steel base, a moulded polypropylene seat on a steel column with a release lever, a cover and a T-shaped footrest.
- IKEA HEMNES TV bench assembly instructions — 39 steps, about 2–3 hours. Solid pine TV bench with a light brown top: three drawers under three open shelves, built on its end from two leg frames and four long rails.
- IKEA ODGER chair assembly instructions — 7 steps, about 5–10 min. Dining chair in anthracite moulded composite: the seat shell hooks onto the one-piece leg base and is locked from below with two click-in levers, no tools needed.
- IKEA FJÄLLBO TV bench assembly instructions — 35 steps, about 2–3 hours. Long black steel TV bench on eight posts with a solid wood top and middle shelf, a perforated steel bottom shelf, perforated end panels and three perforated doors.
- IKEA DALFRED bar stool assembly instructions — 11 steps, about 20–30 min. A birch bar stool with a spin-up seat: four splayed legs on two hub discs, a steel footrest ring, and a threaded spindle you screw in to set the height.
- IKEA MAMMUT children's chair assembly instructions — 6 steps, about 10 min. A chunky moulded-plastic children's chair for indoors or out: four legs push into the seat and the backrest clicks into place, no screws.
- IKEA LISABO chair assembly instructions — 10 steps, about 20–30 min. Solid ash dining chair: two leg frames that cross under the seat in a half-lap joint, a bent ash-veneer backrest and seat, all fixed with one Allen key.
- IKEA SUNDVIK children's chair assembly instructions — 9 steps, about 15 min. A small painted wooden children's chair: two ready-made side frames joined by the backrest and two seat rails, with the seat screwed on from below.
- IKEA AGAM junior chair assembly instructions — 17 steps, about 30 min. A tall junior chair in black-stained solid wood with a footrest: a spindle backrest, four splayed legs and an H-shaped stretcher, all held with 16 screws.
- IKEA BYÅS TV bench assembly instructions — 34 steps, about 2–3 hours. A high-gloss white BYÅS TV bench: a cam-lock carcass on a recessed plinth, three compartments with shelves, two push-open drawers on runners, fixed to the wall.
- IKEA LACK TV bench assembly instructions — 13 steps, about 45 min. A low black-brown LACK TV bench: a shelf on 4 short legs, two side panels on cam locks under a thick top, fixed to the wall with 2 hidden brackets.
- IKEA SKOGSTA chair assembly instructions — 6 steps, about 15–20 min. Solid acacia dining chair with a hooped spindle back: two leg frames and a cross stretcher bolted under the ready-made seat, with one Allen key and a flat screwdriver.
- IKEA PERJOHAN bench with storage assembly instructions — 17 steps, about 30–45 min. A solid pine bench with a hand-grip slot in the seat and a long trough between the legs for shoes or baskets, held together with dowels and 16 screws.
- IKEA NORDVIKEN chair assembly instructions — 12 steps, about 30–40 min. Solid wood dining chair in black with a three-slat ladder back: two side frames doweled to the rails and slats, screwed together and topped with a solid seat.
- IKEA SANDSBERG chair assembly instructions — 13 steps, about 15–20 min. Stackable black dining chair: two steel tube side frames bolted to two curved cross rails, with a perforated plastic backrest and a seat that clicks on.
- IKEA STACKHOLMEN stool, outdoor assembly instructions — 10 steps, about 30 min. An outdoor stool in light brown stained acacia with a curved seat woven from cord: two leg frames on dowels and screws, bolted into the seat.
- IKEA BROR work bench assembly instructions — 13 steps, about 40 min. A sturdy black steel work bench with three pine plywood shelves: four angle legs with plastic feet are bolted to the shelf frames with corner brackets.
- IKEA MUSKAN bench assembly instructions — 6 steps, about 20 minutes. A small white slatted bench with a shelf underneath: two slatted shelves dowelled and screwed between two ready-made side frames.
- IKEA GLENN bar stool assembly instructions — 11 steps, about 20–30 min. A counter-height bar stool with a white moulded seat shell on two chromed sled-base side frames, bolted together under the seat, with a footrest across the front.
- IKEA INGOLF junior chair assembly instructions — 16 steps, about 30 min. A tall junior chair in antique-stained solid wood with a footrest: two glued side frames joined by four rails, a seat, a crossed backrest brace and a curved backrest.
- IKEA KRITTER children's chair assembly instructions — 8 steps, about 15 min. A small white wooden children's chair with animal cut-outs in the backrest: the backrest and seat go between two ready-made side frames, held by 6 screws.
- IKEA RÅGRUND towel rack/chair assembly instructions — 11 steps, about 40 min. A bamboo chair with a tall ladder back for towels: two side frames, a seat, a lower shelf and a 3-rung ladder, held with Allen screws and angle brackets.
- IKEA MUSKAN storage stool assembly instructions — 9 steps, about 20 minutes. A white slatted stool with storage inside: two leg frames and two slatted panels dowelled and screwed into a box, a bottom shelf dropped in and a slatted lid on top.
- IKEA VIHALS chair assembly instructions — 9 steps, about 15–20 min. Dining chair with a white steel tube frame and a padded beige-grey seat and backrest that click on, held together by four bolts.
- IKEA VILTO step stool assembly instructions — 7 steps, about 15–20 min. Low solid birch step stool: a rounded seat on two splayed leg frames joined by two long rods, put together upside down with 8 screws.
- IKEA KRYLBO chair assembly instructions — 5 steps, about 10–15 min. Upholstered dining chair in Axvall blue: two steel leg frames and a curved backrest screwed to the padded seat with 10 screws and the Allen key in the box.
- IKEA ROSENTORP chair assembly instructions — 16 steps, about 20–30 min. White solid wood dining chair with a crossed backrest: the side rails bolt to the back and front frames with barrel nuts, and the seat screws on with four brackets.
- IKEA UTTER children's stool assembly instructions — 3 steps, about 5 min. A light moulded-plastic stool for children, for indoors or out: four legs screw into the corners of the seat by hand, no tools or screws.
Assembling chairs & stools: the numbers
Counted from the 43 guides in Chairs & stools, each built from its official manual.
| Guides | 43 |
|---|---|
| Steps | 3 to 46 (typically 11) |
| Time | about 5 min (FRANKLIN bar stool with backrest, foldable) to about 2–3 hours (BYÅS TV bench) |
| Fittings per build | 0 to 178 (typically 20) |
| Planned for two people | 5 of 43 |
| Wall fixing in the manual | 7 of 43 |
| Most common tools | Allen key (22), Phillips screwdriver (20), Hammer (9), Flat-blade screwdriver (5) |
| No tools needed | 3 of 43 |
| Allen key supplied | 31 of 43 |
Fittings in chairs & stools boxes
The kinds of fitting these manuals use most. What each one does: furniture hardware explained.
| Fitting | Guides | Total |
|---|---|---|
| Screws | 34 of 43 | 462 |
| Nuts and washers | 17 of 43 | 87 |
| Wooden dowels | 16 of 43 | 208 |
| Bolts and Allen screws | 16 of 43 | 123 |
| Brackets | 10 of 43 | 43 |
| Feet, glides and castors | 9 of 43 | 47 |
What the chairs & stools manuals warn about
Notes from the official manuals, at the step where they apply.
- Hand-tight only: you tighten it with the wrench in step 4. (MARIUS stool, step 1)
- Use the 100215 connector screws here, not the long thin 122824 screws. Tighten until the head sits flush with the leg. (BEKVÄM step stool, step 1)
- Again only loosely, so the parts can still settle. (LÄTT children's table with 2 chairs, step 7)
- Three rails look alike: count the dots. Leave all screws loose until step 13. (STIG bar stool with backrest, step 1)
- Press on top of the seat, never under its edge: the hinge can pinch. (FRANKLIN bar stool with backrest, foldable, step 2)
- If you can still see a gap or part of the plug, the leg has not clicked in: press it down again. (MAMMUT children's stool, step 2)
Chairs & stools by IKEA range
Ranges with more than one guide: each page compares the models and the fittings they share.
Chairs & stools: questions and answers
How long does it take to assemble chairs & stools?
In these 43 guides, from about 5 min for the FRANKLIN bar stool with backrest, foldable to about 2–3 hours for the BYÅS TV bench. Each guide gives its own estimate for the planned number of people.
Can one person assemble chairs & stools?
38 of the 43 chairs & stools guides here are one-person builds; 5 are planned for two people, usually for the steps where a large part is lifted, turned or stood up.
What tools do I need for chairs & stools?
Most often Allen key (22 of 43, supplied), Phillips screwdriver (20 of 43), hammer (9 of 43) and flat-blade screwdriver (5 of 43). 3 need no tools. Each guide lists exactly what it needs.
Do chairs & stools need to be fixed to the wall?
7 of the 43 manuals include a wall fixing. Furniture that can tip over must be fixed as its manual shows; use screws and plugs that suit your wall.