Step by StepAssembly Find your furniture

IKEA NORDVIKEN chair assembly instructions

How to assemble the IKEA NORDVIKEN chair, step by step: 12 animated steps built from the official manual, about 30–40 min for 1 person, with Allen key (included), Phillips screwdriver, awl.

Solid wood dining chair in black with a three-slat ladder back: two side frames doweled to the rails and slats, screwed together and topped with a solid seat. Size: 44×54 cm, 97 cm high, seat height 45 cm (17 3/8×21 1/4", 38 1/4" high). About 30–40 min, 1 person. Tools: Allen key (included), Phillips screwdriver, Awl.

Based on the official IKEA manual AA-2127346-6 (PDF). Guide updated .

NORDVIKEN chair: quick facts
Steps12
Time30–40 min
People1
ToolsAllen key (included), Phillips screwdriver, Awl
Size44×54 cm, 97 cm high, seat height 45 cm (17 3/8×21 1/4", 38 1/4" high)
Official manualAA-2127346-6
IKEA article number403.691.09 (black)
Pieces in the box43

In the box

PartPart numberQuantity
Side frame2
Back seat rail (curved)1
Backrest slat3
Front rail1
Seat1
Screw 128758 (long)4
Screw100422052
Screw1229254
Dowel 101357 (thick)2
Dowel10135018
Bracket1226204
Allen key100833771

Steps

  1. Lay out the parts and fit the 4 brackets — Lay both side frames flat on a soft surface, inner sides up, and the front rail flat between them. Push a bracket (122620) into the hole in the seat rail of each side frame, near the back leg, and 2 brackets into the holes in the front rail. Check: Work on a rug or the flattened box so the black finish does not get scratched.
  2. Fit the curved back seat rail — Push a thick dowel (101357) and a thin dowel (101350) into each end of the curved back seat rail. Then push the rail onto the back leg of the lower side frame, at the bend, so its dowels go into the holes. Check: Each end gets one thick dowel 101357 and one thin dowel 101350.
  3. Fit the 3 backrest slats — Push 2 dowels (101350) into each end of the 3 backrest slats. Push the slats onto the upper back leg of the lower side frame, curved the same way as the seat rail, so the dowels go into the holes.
  4. Fit the front rail — Push 2 dowels (101350) into each end of the front rail. Stand the rail on its end on the top of the front leg, brackets facing in towards the seat, and press it down so the dowels go into the holes.
  5. Turn the second side frame over onto the top — Turn the second side frame over and lay it onto the upright rails and slats, back leg over back leg. Press it down so all the dowels go into its holes. Check: Line up all 10 dowels before you press, so none of them bends.
  6. Stand the chair up and screw the left side — Stand the chair up on its legs. On the left side, screw a long screw (128758) through the front leg into the front rail and one through the back leg into the back seat rail, at seat height, with the Allen key. Check: Use the long screws 128758 here, not the shorter 10042205.
  7. Screw the right side — Screw the other 2 long screws (128758) through the right front leg and the right back leg into the rail ends in the same way.
  8. Screw the top of the backrest — Screw a screw (10042205) through the top of each back leg into the end of the top slat with the Allen key.
  9. Turn the chair over onto the seat — Lay a cloth on a table and put the seat on it, top side down. Turn the chair upside down and lower it onto the seat, with the backrest hanging over the table edge. The rim of the seat should stand out evenly all round the frame. Check: Check that the seat sits evenly: the same overhang on both sides.
  10. Prick the 4 screw holes — Push the awl through the hole in each of the 4 brackets into the underside of the seat, to start the screw holes.
  11. Screw the seat on — Turn a screw (122925) through each bracket into the seat with a Phillips screwdriver, 4 in all.
  12. Done! — Your NORDVIKEN chair is ready. Lift it off the table and stand it on its legs. It is tested for 110 kg. Check the screws now and then and tighten them again if needed.

NORDVIKEN chair: questions and answers

How long does it take to assemble the IKEA NORDVIKEN chair?

About 30–40 min for 1 person, working through the 12 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the NORDVIKEN chair?

Allen key (included), Phillips screwdriver, awl. Already in the box: Allen key.

Can one person assemble the NORDVIKEN chair?

Yes, it is a one-person build.

What size is the NORDVIKEN chair once assembled?

44×54 cm, 97 cm high, seat height 45 cm (17 3/8×21 1/4", 38 1/4" high), as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the NORDVIKEN chair?

28 fittings of 4 kinds, the most numerous being 18 × dowel, 4 × screw, 4 × bracket. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA NORDVIKEN chair assembly instructions PDF?

The official PDF is manual AA-2127346-6, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 403.691.09 (black); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-2127346-6. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example screw 128758). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All chairs & stools assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained