Step by StepAssembly Find your furniture

IKEA MARIUS stool assembly instructions

How to assemble the IKEA MARIUS stool, step by step: 6 animated steps built from the official manual, about 10–15 min for 1 person, with Phillips screwdriver, wrench (included).

IKEA MARIUS stool, assembled

Steel-frame stool: two U-shaped leg frames bolted together, then screwed to the seat. Size: Ø32 cm seat, 45 cm high (17 3/4"). About 10–15 min, 1 person. Tools: Phillips screwdriver, Wrench (included).

Based on the official IKEA manual AA-302068-12 (PDF). Guide updated .

MARIUS stool: quick facts
Steps6
Time10–15 min
People1
ToolsPhillips screwdriver, Wrench (included)
SizeØ32 cm seat, 45 cm high (17 3/4")
Official manualAA-302068-12
IKEA article number101.356.59 (black)
Pieces in the box14

In the box

PartPart numberQuantity
Seat1
U-shaped leg frame2
Carriage bolt100049611
Nut1048751
Spacer4
Screw1095664
Wrench1081841

Steps

  1. Bolt the two leg frames together — Cross the two U-shaped frames. Push the carriage bolt down through the middle (round head up, square neck in the square hole) and screw the nut on underneath, by hand only for now. Check: Hand-tight only: you tighten it with the wrench in step 4.
  2. Put the frame upside down on the seat — Lay the seat upside down on the floor, turn the leg frame over and rest it on the seat.
  3. Screw the frame to the seat — Put a spacer between the frame and each seat hole, then fasten each with a screw (109566), in the order 1-2-3-4. Use a Phillips screwdriver. Check: Do not use a power drill: the screws can strip the plastic.
  4. Tighten the nut with the wrench — Now tighten the centre nut firmly with the wrench (108184). Check: If the stool wobbles later: loosen the nut, stand the stool on the floor, press down and tighten again.
  5. Turn the stool over — Stand the stool on its legs. Max load 110 kg (242 lb). It is a seat, not a step stool: do not stand on it.
  6. Done! — Your MARIUS stool is ready. MARIUS stools stack, so you can build several and stack them.

MARIUS stool: questions and answers

How long does it take to assemble the IKEA MARIUS stool?

About 10–15 min for 1 person, working through the 6 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the MARIUS stool?

Phillips screwdriver, wrench (included). Already in the box: Wrench.

Can one person assemble the MARIUS stool?

Yes, it is a one-person build.

What size is the MARIUS stool once assembled?

Ø32 cm seat, 45 cm high (17 3/4"), as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the MARIUS stool?

7 fittings of 4 kinds, the most numerous being 4 × screw, 1 × carriage bolt, 1 × nut. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA MARIUS stool assembly instructions PDF?

The official PDF is manual AA-302068-12, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 101.356.59 (black); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-302068-12. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example carriage bolt 10004961). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All chairs & stools assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained