Step by StepAssembly Find your furniture

IKEA DALFRED bar stool assembly instructions

How to assemble the IKEA DALFRED bar stool, step by step: 11 animated steps built from the official manual, about 20–30 min for 1 person, with Allen key (included), Phillips screwdriver, hammer, rubber mallet.

IKEA DALFRED bar stool, assembled

A birch bar stool with a spin-up seat: four splayed legs on two hub discs, a steel footrest ring, and a threaded spindle you screw in to set the height. Size: 50×50 cm, Ø30 cm seat, seat height 63–74 cm (shown at 63 cm). About 20–30 min, 1 person. Tools: Allen key (included), Phillips screwdriver, Hammer, Rubber mallet.

Based on the official IKEA manual AA-399492-11 (PDF). Guide updated .

DALFRED bar stool: quick facts
Steps11
Time20–30 min
People1
ToolsAllen key (included), Phillips screwdriver, Hammer, Rubber mallet
Size50×50 cm, Ø30 cm seat, seat height 63–74 cm (shown at 63 cm)
Official manualAA-399492-11
IKEA article number806.130.91 (birch)
Pieces in the box34

In the box

PartPart numberQuantity
Leg4
Small hub disc1
Large hub disc1
Footrest ring1
Seat1
Seat plate1
Flanged sleeve1
Threaded spindle1
Screw 105251 (long)8
Screw 100212 (short)4
Screw1084435
Screw1052984
End plug1076751
Allen key1000921

Steps

  1. Fix two legs to the hub discs — Stand the small and the large hub disc on edge, small one at the top end. Hold two legs on opposite sides and fix each leg with two long screws 105251 (one into each disc), using the Allen key. Check: Use the long screws 105251 here, not the shorter 100212.
  2. Fix the other two legs — Fix the last two legs between the first two in the same way: two long screws 105251 per leg, one into each disc, tightened with the Allen key.
  3. Fit the footrest ring — Turn the frame upside down onto the top of the legs. Lower the steel footrest ring in over the feet until it rests against the legs, holes to the legs. Start the 4 short screws 100212 from inside the ring by hand. Check: Only by hand for now: no Allen key yet.
  4. Tighten the ring screws — Now tighten the 4 screws 100212 firmly with the Allen key.
  5. Screw the plate to the seat — Lay the seat upside down on a soft surface. Centre the steel seat plate on it, socket facing up, and fix it with 5 screws 108443 using a Phillips screwdriver.
  6. Fit the sleeve in the frame — Stand the frame on its feet. Push the flanged sleeve down into the hole in the small disc and fix the flange with the 4 screws 105298 from the bag, using the screwdriver.
  7. Knock the spindle into the plate — Put the tapered end of the threaded spindle (the end next to the collar) into the socket of the seat plate. Knock it in firmly with a hammer on the other end.
  8. Tap in the end plug — Press the end plug 107675 into the open top end of the spindle and tap it home with a rubber mallet.
  9. Screw the seat onto the frame — Turn the seat over and lower the spindle into the sleeve. Turn the seat clockwise to screw it down. Then press the seat down firmly with weight on it.
  10. Set the height — Turn the seat anticlockwise to raise it and clockwise to lower it, between 63 and 74 cm.
  11. Done! — Your DALFRED bar stool is ready. Tested for 100 kg. Check the screws now and then and tighten them if needed.

DALFRED bar stool: questions and answers

How long does it take to assemble the IKEA DALFRED bar stool?

About 20–30 min for 1 person, working through the 11 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the DALFRED bar stool?

Allen key (included), Phillips screwdriver, hammer, rubber mallet. Already in the box: Allen key.

Can one person assemble the DALFRED bar stool?

Yes, it is a one-person build.

What size is the DALFRED bar stool once assembled?

50×50 cm, Ø30 cm seat, seat height 63–74 cm (shown at 63 cm), as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the DALFRED bar stool?

10 fittings of 3 kinds, the most numerous being 5 × screw, 4 × screw, 1 × end plug. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA DALFRED bar stool assembly instructions PDF?

The official PDF is manual AA-399492-11, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 806.130.91 (birch); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-399492-11. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example screw 105251). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All chairs & stools assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained