IKEA PERJOHAN bench with storage assembly instructions
How to assemble the IKEA PERJOHAN bench with storage, step by step: 17 animated steps built from the official manual, about 30–45 min for 2 people, with Allen key (included).
A solid pine bench with a hand-grip slot in the seat and a long trough between the legs for shoes or baskets, held together with dowels and 16 screws. Size: 100×28×45 cm. About 30–45 min, 2 people. Tools: Allen key (included).
Based on the official IKEA manual AA-2242615-4 (PDF). Guide updated .
| Steps | 17 |
|---|---|
| Time | 30–45 min |
| People | 2 |
| Tools | Allen key (included) |
| Size | 100×28×45 cm |
| Official manual | AA-2242615-4 |
| IKEA article number | 604.853.39 (pine) |
| Pieces in the box | 48 |
In the box
| Part | Part number | Quantity |
|---|---|---|
| Leg | 2 | |
| Rail | 2 | |
| Top rail | 2 | |
| Bottom panel | 1 | |
| Seat board | 2 | |
| Screw | 100214 | 16 |
| Wooden dowel | 101350 | 22 |
| Allen key | 100001 | 1 |
Steps
- Dowels in the two rails — Lay the two wide rails flat on a rug or the box, with the groove side facing up. Push 2 dowels (101350) into the holes in each end of both rails: 8 dowels in all. Check: Work on a soft surface so the pine does not get scratched.
- Push the rails into the first leg — Stand one leg upside down on its top end, arch upwards, holes facing the rails. Stand both rails on their long edge with the grooves on top and facing each other, and push their dowels into the leg.
- Screw the leg to the rails — Line up each rail so its outer face ends flush with the sloping edge of the leg. Drive 4 screws (100214) through the leg into the rail ends with the allen key (100001), 2 per rail. Check: The rail must not stick out past the edge of the leg: check before you tighten.
- Dowels in the two top rails — Take the two narrow top rails and push 2 dowels (101350) into the holes in each end of both: 8 dowels in all. Then put them to one side.
- Turn it over onto the leg — With a helper, turn the frame over so the leg lies flat on the rug and the two rails point straight up. Check: The frame is long and top-heavy now: turn it over with two people.
- Slide the top rails into the leg — Push the two top rails down into the holes at the top end of the leg, one at the front and one at the back. The wide, counterbored side of their screw holes must face the feet of the leg. Check: Check the screw holes: if the counterbores face the wrong way, turn the top rail round.
- Dowels in the bottom panel — Lay the bottom panel flat and push 1 dowel (101350) into the hole in each end.
- Slide the bottom panel into the grooves — Hold the bottom panel above the rails and slide it down into the grooves on their inner faces until its lower dowel goes into the leg.
- Put the second leg on top — Lower the second leg onto the dowels sticking up from the rails, the top rails and the bottom panel, with its arch at the same end as the first leg. Press it down evenly.
- Screw the second leg — Drive 4 screws (100214) down through the top leg into the rail ends with the allen key, 2 per rail.
- Stand the bench on its feet — With a helper, tip the bench over so it stands on the feet of both legs.
- Dowels in the leg tops — Push 2 dowels (101350) into the middle holes in the top end of each leg: 4 dowels in all.
- Put the seat boards on — Place the two seat boards on the dowels with the hand-grip notches facing each other in the middle and the rounded edges on the outside.
- Screw the seat to the legs — Drive 4 screws (100214) down through the ends of the seat boards into the legs with the allen key, one at each end of each board.
- Turn the bench upside down — Roll the bench over so it lies upside down on its seat, on the rug.
- Screw the top rails to the seat — Drive 4 screws (100214) through the counterbored holes in the two top rails into the seat with the allen key, 2 per rail. Check: Tighten all the screws again now and then if the bench starts to wobble.
- Done! — Turn the bench back onto its feet. Your PERJOHAN bench is ready: it holds up to 110 kg, the grip in the seat helps you carry it, and the trough underneath takes shoes or baskets.
PERJOHAN bench with storage: questions and answers
How long does it take to assemble the IKEA PERJOHAN bench with storage?
About 30–45 min for 2 people, working through the 17 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.
What tools do I need for the PERJOHAN bench with storage?
Allen key (included). Already in the box: Allen key.
Can one person assemble the PERJOHAN bench with storage?
It is planned as a 2-person build. One person can do most of it, but get help for steps 5, 11 and 15, where the furniture is lifted or turned.
What size is the PERJOHAN bench with storage once assembled?
100×28×45 cm, as given for this model. Leave extra floor space around it while you build, and room to lift or stand it up.
How many screws and fittings come with the PERJOHAN bench with storage?
38 fittings of 2 kinds, the most numerous being 22 × wooden dowel, 16 × screw. The In the box table lists every one with its part number, so you can count them before you start.
Where can I download the IKEA PERJOHAN bench with storage assembly instructions PDF?
The official PDF is manual AA-2242615-4, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 604.853.39 (pine); other colours have their own numbers but usually the same manual.
Which IKEA manual is this guide based on?
The official manual AA-2242615-4. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.
What if a part or screw is missing?
Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example screw 100214). IKEA customer service can send replacement fittings using that number.
Related assembly guides
- IKEA PERJOHAN stool with storage assembly instructions
- IKEA MARIUS stool assembly instructions
- IKEA BEKVÄM step stool assembly instructions
- IKEA LÄTT children's table with 2 chairs assembly instructions
- IKEA STIG bar stool with backrest assembly instructions
- IKEA FRANKLIN bar stool with backrest, foldable assembly instructions
- IKEA MAMMUT children's stool assembly instructions
- IKEA BRIMNES TV bench assembly instructions
All IKEA PERJOHAN assembly guides · All chairs & stools assembly guides · All furniture assembly guides
Stuck on a step? Common assembly problems and fixes · Furniture hardware explained