Step by StepAssembly Find your furniture

IKEA KRITTER children's chair assembly instructions

How to assemble the IKEA KRITTER children's chair, step by step: 8 animated steps built from the official manual, about 15 min for 1 person, with Allen key (included).

A small white wooden children's chair with animal cut-outs in the backrest: the backrest and seat go between two ready-made side frames, held by 6 screws. Size: 27×29 cm, 53 cm high, seat height 30 cm. About 15 min, 1 person. Tools: Allen key (included).

Based on the official IKEA manual AA-377394-3 (PDF). Guide updated .

KRITTER children's chair: quick facts
Steps8
Time15 min
People1
ToolsAllen key (included)
Size27×29 cm, 53 cm high, seat height 30 cm
Official manualAA-377394-3
IKEA article number401.536.99 (white)
Pieces in the box14

In the box

PartPart numberQuantity
Side frame (rear post, front leg, apron, stretcher)2
Seat with front apron1
Top back rail1
Backrest board with animal cut-outs1
Dowel1013502
Screw1002146
Allen key1000011

Steps

  1. Slide the backrest into the top rail — Lay the top back rail flat. Push a dowel 101350 into the larger hole in each end of the rail, then slide the animal backrest board, lying flat, into the slot along the rail's underside. Check: The small hole above each dowel is for a screw later: leave it empty.
  2. Push the backrest onto the seat — Stand the seat on one side edge, top facing the rail. Hold the rail upright beside it and push the backrest's 3 pegs into the 3 holes along the rear edge of the seat.
  3. Lower it onto the first side frame — Lay one side frame flat, the long rear post at the back. Lower the seat and backrest onto it so the rail's dowel goes into the hole near the top of the post and the rear corner of the seat sits round the post.
  4. Put the second side frame on top — Lay the second side frame on top, rear post over the rail, and press it down onto the rail's dowel and against the seat.
  5. Screw the top frame on — Drive 3 screws 100214 through the top side frame with the Allen key: at the top of the rear post into the rail, in the rear post at seat level into the seat, and at the top of the front leg into the front apron.
  6. Turn the chair over — Roll the chair over onto the screwed side, so the other side frame is on top.
  7. Screw the other frame on — Drive the last 3 screws 100214 through the side frame now on top with the Allen key: into the rail, into the seat and into the front apron.
  8. Done! — Your KRITTER chair is ready. Stand it on its legs. Check the screws now and then and tighten them if needed.

KRITTER children's chair: questions and answers

How long does it take to assemble the IKEA KRITTER children's chair?

About 15 min for 1 person, working through the 8 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the KRITTER children's chair?

Allen key (included). Already in the box: Allen key.

Can one person assemble the KRITTER children's chair?

Yes, it is a one-person build.

What size is the KRITTER children's chair once assembled?

27×29 cm, 53 cm high, seat height 30 cm, as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the KRITTER children's chair?

8 fittings of 2 kinds, the most numerous being 6 × screw, 2 × dowel. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA KRITTER children's chair assembly instructions PDF?

The official PDF is manual AA-377394-3, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 401.536.99 (white); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-377394-3. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example dowel 101350). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All chairs & stools assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained