IKEA GLENN bar stool assembly instructions
How to assemble the IKEA GLENN bar stool, step by step: 11 animated steps built from the official manual, about 20–30 min for 1 person, with Allen key (included), hammer, adjustable spanner.
A counter-height bar stool with a white moulded seat shell on two chromed sled-base side frames, bolted together under the seat, with a footrest across the front. Size: 50×48 cm, seat height 66 cm, height 89 cm. About 20–30 min, 1 person. Tools: Allen key (included), Hammer, Adjustable spanner.
Based on the official IKEA manual AA-372553-9 (PDF). Guide updated .
| Steps | 11 |
|---|---|
| Time | 20–30 min |
| People | 1 |
| Tools | Allen key (included), Hammer, Adjustable spanner |
| Size | 50×48 cm, seat height 66 cm, height 89 cm |
| Official manual | AA-372553-9 |
| IKEA article number | 601.317.34 |
| Pieces in the box | 23 |
In the box
| Part | Part number | Quantity |
|---|---|---|
| Side frame | 2 | |
| Footrest | 1 | |
| Seat shell | 1 | |
| Glide | 120262 | 4 |
| Bolt | 120199 | 2 |
| Nut | 100716 | 2 |
| Countersunk screw | 120200 | 2 |
| Seat mount | 120833 | 4 |
| Socket screw | 100150 | 4 |
| Allen key | 100001 | 1 |
Steps
- Hammer on the 4 glides — Stand both side frames upside down, floor runners on top. Press a glide 120262 onto each end of each runner, its peg in the hole, and tap it home with a hammer: 4 glides in all.
- Bolt the two frames together — Turn both frames the right way up and stand them side by side, their flat top ends together. Push the 2 bolts 120199 through from the right. Hold each nut 100716 on the left with a spanner and tighten the bolt with the Allen key. Check: The bolt heads must sit flat against the frame, not at an angle.
- Fit the footrest — Hold the footrest between the two front legs, level with the holes. Screw a countersunk screw 120200 through the outside of each leg into the footrest end, one from each side, until the head sits flush in the leg. Check: The screw heads should end up flush with the tube, not sticking out.
- Push in the 4 seat mounts — Push a seat mount 120833 into each of the 4 holes on top of the top rails, two on each frame, narrow end down.
- Set the frame on the seat — Cover a table with cardboard and lay the seat on it upside down, the backrest hanging over the edge. Turn the frame over and set it down on the seat, each seat mount on its insert.
- Screw the frame to the seat — Fix the frame to the seat with the 4 socket screws 100150, one down through each rail and seat mount into the seat. Tighten them with the Allen key. Check: Don't use a power drill: tighten by hand with the Allen key.
- Tighten the centre bolts — With the stool still upside down, tighten the 2 centre bolts 120199 again: hold each nut with the spanner and turn the bolt with the Allen key.
- Tighten the footrest screws — Tighten the 2 footrest screws 120200 again with the Allen key, one on each front leg.
- Turn the stool over and load the seat — Lift the stool off the table and turn it over onto its feet. Put a weight on the seat, or sit on it.
- Final tightening under load — With the weight still on the seat, tighten the 2 centre bolts 120199 one last time: hold each nut with the spanner and turn the bolt with the Allen key. Check: If you skip this, the seat can rock on the frame.
- Done! — Your GLENN bar stool is ready. Tested for 100 kg. Check the bolts and screws now and then and tighten them if needed.
GLENN bar stool: questions and answers
How long does it take to assemble the IKEA GLENN bar stool?
About 20–30 min for 1 person, working through the 11 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.
What tools do I need for the GLENN bar stool?
Allen key (included), hammer, adjustable spanner. Already in the box: Allen key.
Can one person assemble the GLENN bar stool?
Yes, it is a one-person build.
What size is the GLENN bar stool once assembled?
50×48 cm, seat height 66 cm, height 89 cm, as given for this model. Leave extra floor space around it while you build.
How many screws and fittings come with the GLENN bar stool?
18 fittings of 6 kinds, the most numerous being 4 × glide, 4 × seat mount, 4 × socket screw. The In the box table lists every one with its part number, so you can count them before you start.
Where can I download the IKEA GLENN bar stool assembly instructions PDF?
The official PDF is manual AA-372553-9, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 601.317.34; other colours have their own numbers but usually the same manual.
Which IKEA manual is this guide based on?
The official manual AA-372553-9. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.
What if a part or screw is missing?
Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example glide 120262). IKEA customer service can send replacement fittings using that number.
Related assembly guides
- IKEA MARIUS stool assembly instructions
- IKEA BEKVÄM step stool assembly instructions
- IKEA LÄTT children's table with 2 chairs assembly instructions
- IKEA STIG bar stool with backrest assembly instructions
- IKEA FRANKLIN bar stool with backrest, foldable assembly instructions
- IKEA MAMMUT children's stool assembly instructions
- IKEA BRIMNES TV bench assembly instructions
- IKEA BESTÅ TV bench assembly instructions
All chairs & stools assembly guides · All furniture assembly guides
Stuck on a step? Common assembly problems and fixes · Furniture hardware explained