Step by StepAssembly Find your furniture

IKEA TOBIAS chair assembly instructions

How to assemble the IKEA TOBIAS chair, step by step: 4 animated steps built from the official manual, about 10–15 min for 1 person, with Allen key (included).

IKEA TOBIAS chair, assembled

Cantilever chair: a clear polycarbonate seat shell screwed onto a chrome-plated steel tube base with 4 screws. Size: 55×56 cm, 82 cm high, seat height 44 cm (21 5/8×22×32 1/4", seat 17 3/8"). About 10–15 min, 1 person. Tools: Allen key (included).

Based on the official IKEA manual AA-1916010-4 (PDF). Guide updated .

TOBIAS chair: quick facts
Steps4
Time10–15 min
People1
ToolsAllen key (included)
Size55×56 cm, 82 cm high, seat height 44 cm (21 5/8×22×32 1/4", seat 17 3/8")
Official manualAA-1916010-4
IKEA article number803.496.71 (transparent chrome plated)
Pieces in the box16

In the box

PartPart numberQuantity
Seat shell1
Chrome-plated base1
Screw1184074
Washer1180854
Cap 120915 (front holes)2
Cap 120916 (back holes)2
Plastic strip1565091
Allen key1000921

Steps

  1. Screws, washers and strip on the base — Stand the base on the floor. Push a screw (118407) up from below through each of the 4 holes in the seat rails, then press a washer (118085) down over each screw until it sits on the rail. Press the plastic strip (156509) onto the back cross tube, its 3 pegs in the holes. Check: The washers hold the screws in place, so they do not drop out while you fit the seat.
  2. Put the seat on and press in the caps — Lower the seat shell straight down onto the base so the 4 screws come up through its holes. Press a cap 120916 into each of the 2 back holes and a cap 120915 into each of the 2 front holes. Check: The two cap types look alike: the 120916 caps go in the back holes, the 120915 caps in the front holes.
  3. Tighten the 4 screws — Reach under the seat and tighten the 4 screws firmly with the Allen key (100092), turning clockwise.
  4. Done! — Your TOBIAS chair is ready. It is tested for 110 kg. If the seat ever feels loose, tighten the 4 screws under it again with the Allen key.

TOBIAS chair: questions and answers

How long does it take to assemble the IKEA TOBIAS chair?

About 10–15 min for 1 person, working through the 4 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the TOBIAS chair?

Allen key (included). Already in the box: Allen key.

Can one person assemble the TOBIAS chair?

Yes, it is a one-person build.

What size is the TOBIAS chair once assembled?

55×56 cm, 82 cm high, seat height 44 cm (21 5/8×22×32 1/4", seat 17 3/8"), as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the TOBIAS chair?

9 fittings of 3 kinds, the most numerous being 4 × screw, 4 × washer, 1 × plastic strip. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA TOBIAS chair assembly instructions PDF?

The official PDF is manual AA-1916010-4, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 803.496.71 (transparent chrome plated); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-1916010-4. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example screw 118407). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All chairs & stools assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained