Step by StepAssembly Find your furniture

IKEA VILTO step stool assembly instructions

How to assemble the IKEA VILTO step stool, step by step: 7 animated steps built from the official manual, about 15–20 min for 1 person, with Allen key 100092 + handle 121030 (included), Phillips screwdriver.

Low solid birch step stool: a rounded seat on two splayed leg frames joined by two long rods, put together upside down with 8 screws. Size: 40×32×25 cm. About 15–20 min, 1 person. Tools: Allen key 100092 + handle 121030 (included), Phillips screwdriver.

Based on the official IKEA manual AA-2010369-4 (PDF). Guide updated .

VILTO step stool: quick facts
Steps7
Time15–20 min
People1
ToolsAllen key 100092 + handle 121030 (included), Phillips screwdriver
Size40×32×25 cm
Official manualAA-2010369-4
IKEA article number603.444.53 (birch)
Pieces in the box15

In the box

PartPart numberQuantity
Seat1
Leg frame2
Long rod2
Connector screw1574364
Wood screw1927134
Allen key1000921
Allen-key handle1210301

Steps

  1. First leg frame onto the seat — Lay the seat upside down on a soft surface. Set one leg frame on it with its flat top rail along a short edge, the rail’s holes over the pilot holes in the seat. Screw it down with 2 wood screws 192713 and a Phillips screwdriver.
  2. Push in the long rods — Push the two long rods into the holes on the inside of the frame’s legs, one rod per leg. Push them right in, so the small hole in each rod end lines up with the screw hole on the outside of the leg.
  3. Second leg frame onto the rods — Slide the second leg frame onto the free ends of the rods so they go into the holes in its legs. Its top rail lands on the seat over the other pair of pilot holes.
  4. Screw the second frame to the seat — Fix the second leg frame to the seat with the last 2 wood screws 192713 through its top rail.
  5. Fix the rods with connector screws — Fit the allen key into its handle. Put a connector screw 157436 through the open hole on the outside of each leg into the rod end, one per leg, starting with this frame, and tighten. Check: Use the empty hole nearer the seat. The other hole already holds the factory screw of the frame’s own short rod.
  6. Connector screws on the other side — Turn to the other leg frame and drive the last 2 connector screws 157436 through its legs into the rod ends the same way.
  7. Done! — Turn the stool over and stand it on its four legs. Your VILTO step stool is ready. Max load 100 kg. Check the screws now and then and re-tighten them if needed.

VILTO step stool: questions and answers

How long does it take to assemble the IKEA VILTO step stool?

About 15–20 min for 1 person, working through the 7 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the VILTO step stool?

Allen key 100092 + handle 121030 (included), Phillips screwdriver. Already in the box: Allen key 100092 + handle 121030.

Can one person assemble the VILTO step stool?

Yes, it is a one-person build.

What size is the VILTO step stool once assembled?

40×32×25 cm, as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the VILTO step stool?

9 fittings of 3 kinds, the most numerous being 4 × connector screw, 4 × wood screw, 1 × allen-key handle. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA VILTO step stool assembly instructions PDF?

The official PDF is manual AA-2010369-4, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 603.444.53 (birch); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-2010369-4. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example connector screw 157436). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All IKEA VILTO assembly guides · All chairs & stools assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained