Step by StepAssembly Find your furniture

IKEA LACK TV bench assembly instructions

How to assemble the IKEA LACK TV bench, step by step: 13 animated steps built from the official manual, about 45 min for 1 person, with flat screwdriver, Phillips screwdriver, pencil.

IKEA LACK TV bench, assembled

A low black-brown LACK TV bench: a shelf on 4 short legs, two side panels on cam locks under a thick top, fixed to the wall with 2 hidden brackets. Size: 120×35×36 cm (47 1/4×13 3/4×14 1/8"). About 45 min, 1 person. Tools: Flat screwdriver, Phillips screwdriver, Pencil.

Based on the official IKEA manual AA-2248458-3 (PDF). Guide updated .

LACK TV bench: quick facts
Steps13
Time45 min
People1
ToolsFlat screwdriver, Phillips screwdriver, Pencil
Size120×35×36 cm (47 1/4×13 3/4×14 1/8")
Official manualAA-2248458-3
IKEA article number204.989.37 (black brown)
Pieces in the box39

In the box

PartPart numberQuantity
Top panel1
Side panel2
Bottom shelf1
Leg4
Screw1043238
Cam screw1153124
Cam lock1306204
Screw1003724
Dowel1013434
Allen key1000921
Wall bracket1157532
Cover1157542
Keyhole plate1036932

Steps

  1. A dowel in each leg — Stand the 4 legs on end. Push a dowel (101343) into the small hole on top of each leg, next to the larger screw hole.
  2. Screw the bottom shelf onto the legs — Lay the bottom shelf on the legs so the dowels go into its holes. Screw a long screw (104323) down through each corner of the shelf into a leg with the Allen key (100092), turning clockwise.
  3. Cam screws into the top — Lay the top panel upside down on a rug or the flattened box. Screw a cam screw (115312) into each of the 4 holes near its ends with the Phillips screwdriver. Check: Work on a soft surface so the top does not get scratched.
  4. Side panels onto the top — Push the 2 side panels straight down onto the cam screws at the ends of the top. The round cam lock holes face the inside.
  5. Cam locks: first side panel — Push 2 cam locks (130620) into the round holes in the inner face of a side panel, slot facing out. Turn each one clockwise with the flat screwdriver until it locks onto its cam screw.
  6. Cam locks: second side panel — Do the same on the other side panel: 2 cam locks (130620) in, then turn each one clockwise to lock it.
  7. Wall brackets — At the back of each end, set a wall bracket (115753) on the top panel against the side panel, its big hole facing backwards. Screw it to the top with 2 screws (100372).
  8. Shelf and legs onto the side panels — Turn the shelf with its legs upside down and lay it on the side panels, legs up. Screw a long screw (104323) through the shelf into the end of each side panel with the Allen key, 2 per panel.
  9. Turn the bench over — Get help if you need it and turn the bench over onto its legs, then turn it round so the brackets are at the back.
  10. Mark the wall — Push the bench against the wall where it will stand. Mark the wall through the big hole of each bracket with a pencil, reaching in from the front. Check: Must be fixed to the wall: a TV on top can make the bench tip over.
  11. Wall screws — Pull the bench away. Put a round-headed screw that suits your wall into each mark and leave the head about 7 mm out. Then push the bench back so the heads go through the bracket holes. Check: Wall screws and plugs are not included. Use round heads, not countersunk ones. Ask a specialist if unsure what suits your wall.
  12. Keyhole plates and covers — In each bracket, put a keyhole plate (103693) over the screw head and slide it down so the narrow slot holds the screw. Tighten the screw with the flat screwdriver. Slide a cover (115754) over each bracket.
  13. Done! — Your LACK TV bench is finished and fixed to the wall. The top takes up to 30 kg and the shelf up to 15 kg.

LACK TV bench: questions and answers

How long does it take to assemble the IKEA LACK TV bench?

About 45 min for 1 person, working through the 13 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the LACK TV bench?

Flat screwdriver, Phillips screwdriver, pencil.

Can one person assemble the LACK TV bench?

Yes, it is a one-person build.

Does the LACK TV bench need to be fixed to the wall?

The manual shows a wall fixing: see step 7 (Wall brackets) and step 10 (Mark the wall). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.

What size is the LACK TV bench once assembled?

120×35×36 cm (47 1/4×13 3/4×14 1/8"), as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the LACK TV bench?

30 fittings of 8 kinds, the most numerous being 8 × screw, 4 × cam screw, 4 × cam lock. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA LACK TV bench assembly instructions PDF?

The official PDF is manual AA-2248458-3, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 204.989.37 (black brown); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-2248458-3. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example screw 104323). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All IKEA LACK assembly guides · All chairs & stools assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained