Step by StepAssembly Find your furniture

IKEA LACK wall shelf assembly instructions

How to assemble the IKEA LACK wall shelf, step by step: 5 animated steps built from the official manual, about 15–20 min for 1 person, with Phillips screwdriver, pencil, spirit level, wall screws and plugs (not included).

IKEA LACK wall shelf, assembled

The floating wall shelf: a hidden steel fitting is screwed to the wall, the hollow shelf slides over it and two screws lock it. Size: 110x26 cm. About 15–20 min, 1 person. Tools: Phillips screwdriver, Pencil, Spirit level, Wall screws and plugs (not included).

Based on the official IKEA manual AA-24442-15 (PDF). Guide updated .

LACK wall shelf: quick facts
Steps5
Time15–20 min
People1
ToolsPhillips screwdriver, Pencil, Spirit level, Wall screws and plugs (not included)
Size110x26 cm
Official manualAA-24442-15
IKEA article number706.533.27 (brown walnut effect)
Pieces in the box4

In the box

PartPart numberQuantity
Shelf1
Wall fitting1393941
Screw 109053/1090542

Steps

  1. Level the fitting and mark the holes — Hold the wall fitting (139394) against the wall where the shelf will go, rods pointing out towards you. Lay the spirit level on it until it is straight, then mark the wall through the 5 screw holes with a pencil: one either side of each rod and one in the middle. Check: Screws and plugs for the wall are not included. Choose ones that suit your wall and the load; ask a professional if unsure.
  2. Screw the fitting to the wall — Drill and plug the 5 marks as your wall needs, then screw the fitting to the wall through the same 5 holes. Turn the rods so the small hole in each rod points down. Check: Use pan-head screws, not countersunk ones. The holes in the rods must face the floor, not the ceiling.
  3. Slide the shelf onto the rods — Line up the two holes in the back edge of the shelf with the rods and push the shelf straight back over them until it sits flat against the wall, hiding the fitting.
  4. Lock the shelf with 2 screws — From underneath, drive one screw (109053/109054) up through each small hole in the underside of the shelf into the hole in the rod above it. This locks the shelf onto the fitting.
  5. Done! — Your LACK wall shelf is on the wall. Max load: 10 kg, spread evenly along the shelf.

LACK wall shelf: questions and answers

How long does it take to assemble the IKEA LACK wall shelf?

About 15–20 min for 1 person, working through the 5 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the LACK wall shelf?

Phillips screwdriver, pencil, spirit level, wall screws and plugs (not included).

Can one person assemble the LACK wall shelf?

Yes, it is a one-person build.

Does the LACK wall shelf need to be fixed to the wall?

The manual shows a wall fixing: see step 1 (Level the fitting and mark the holes). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.

What size is the LACK wall shelf once assembled?

110x26 cm, as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the LACK wall shelf?

3 fittings of 2 kinds, the most numerous being 2 × screw 109053/109054, 1 × wall fitting. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA LACK wall shelf assembly instructions PDF?

The official PDF is manual AA-24442-15, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 706.533.27 (brown walnut effect); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-24442-15. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example wall fitting 139394). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All IKEA LACK assembly guides · All bookcases & shelves assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained