IKEA LACK wall shelf unit assembly instructions
How to assemble the IKEA LACK wall shelf unit, step by step: 6 animated steps built from the official manual, about 30–45 min for 2 people, with Allen key (included), pencil, spirit level, screwdriver, wall screws and plugs (not included).
A tall, narrow wall unit: 7 box shelves screwed to a back board, then hung on the wall by a steel plate at the top. Size: 30×190 cm. About 30–45 min, 2 people. Tools: Allen key (included), Pencil, Spirit level, Screwdriver, Wall screws and plugs (not included).
Based on the official IKEA manual AA-2699149-2 (PDF). Guide updated .
| Steps | 6 |
|---|---|
| Time | 30–45 min |
| People | 2 |
| Tools | Allen key (included), Pencil, Spirit level, Screwdriver, Wall screws and plugs (not included) |
| Size | 30×190 cm |
| Official manual | AA-2699149-2 |
| IKEA article number | 602.821.86 (white) |
| Pieces in the box | 35 |
In the box
| Part | Part number | Quantity |
|---|---|---|
| Back board | 1 | |
| Shelf | 7 | |
| Screw 104323/104325 | 14 | |
| Allen key | 100001 | 1 |
| Wall plate 120942 (1 used upright, 2 spare) | 3 | |
| Screw 109053 (horizontal mounting only) | 9 |
Steps
- Back board and 6 shelves — Lay a rug or the cardboard down. Stand the back board on one long edge, back face towards you. Stand 6 shelves on their sides behind it, starting at the bottom end, with their back edges against the board. The last pair of holes, at the top end, stays free for now. Check: The holes in the back of the board must be countersunk (cone-shaped) on the side facing you. If they are not, turn the board round.
- Screw the shelves to the back board — Push a screw (104323/104325) through each of the 12 countersunk holes into the back edges of the shelves, 2 per shelf, and tighten them clockwise with the Allen key.
- Top shelf and wall plate — Turn the unit over so it rests on the shelf fronts, back board facing up. Put the 7th shelf under the top end. Lay the wall plate on the back of the board with its X facing up and its edge with 2 holes sticking out past the top. Hold it there and drive 2 screws (104323/104325) through its slots and the board into the top shelf with the Allen key.
- Stand it against the wall — With a helper, stand the unit up and place it against the wall where you want it, the plate at the top against the wall. Hold a spirit level against the side of the back board and adjust until it is upright. Check: This unit must be fixed to the wall to stop it tipping over.
- Mark and screw to the wall — Mark the wall with a pencil through the 2 holes in the part of the plate above the top shelf. Drill and plug the holes as your wall needs, then screw the plate to the wall through the same holes. Check: Screws and plugs for the wall are not included. Choose ones that suit your wall; ask a professional if unsure.
- Done! — Your LACK wall shelf unit is up. Max load: 3 kg per shelf, 25 kg in total.
LACK wall shelf unit: questions and answers
How long does it take to assemble the IKEA LACK wall shelf unit?
About 30–45 min for 2 people, working through the 6 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.
What tools do I need for the LACK wall shelf unit?
Allen key (included), pencil, spirit level, screwdriver, wall screws and plugs (not included). Already in the box: Allen key.
Can one person assemble the LACK wall shelf unit?
It is planned as a 2-person build. One person can do most of it, but get help for steps 3 and 4, where the furniture is lifted or turned.
Does the LACK wall shelf unit need to be fixed to the wall?
The manual shows a wall fixing: see step 3 (Top shelf and wall plate) and step 5 (Mark and screw to the wall). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.
What size is the LACK wall shelf unit once assembled?
30×190 cm, as given for this model. Leave extra floor space around it while you build, and room to lift or stand it up.
Where can I download the IKEA LACK wall shelf unit assembly instructions PDF?
The official PDF is manual AA-2699149-2, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 602.821.86 (white); other colours have their own numbers but usually the same manual.
Which IKEA manual is this guide based on?
The official manual AA-2699149-2. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.
What if a part or screw is missing?
Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example screw 104323). IKEA customer service can send replacement fittings using that number.
Related assembly guides
- IKEA LACK side table assembly instructions
- IKEA LACK coffee table assembly instructions
- IKEA LACK wall shelf assembly instructions
- IKEA LACK TV bench assembly instructions
- IKEA BILLY bookcase assembly instructions
- IKEA KALLAX shelf unit 2x4 assembly instructions
- IKEA BESTÅ frame assembly instructions
- IKEA HYLLIS shelving unit (in/outdoor) assembly instructions
All IKEA LACK assembly guides · All bookcases & shelves assembly guides · All furniture assembly guides
Stuck on a step? Common assembly problems and fixes · Furniture hardware explained