Step by StepAssembly Find your furniture

IKEA BESTÅ frame assembly instructions

How to assemble the IKEA BESTÅ frame, step by step: 16 animated steps built from the official manual, about 30–45 min for 1 person, with flat screwdriver, Phillips screwdriver, spirit level, Allen key (included).

IKEA BESTÅ frame, assembled

Tall BESTÅ storage frame: cam-lock carcass built lying down, slide-in back panel, adjustable feet and wall fixing, with spacers for a skirting board. Size: 60×40×192 cm (23 5/8×15 3/4×75 5/8"). About 30–45 min, 1 person. Tools: Flat screwdriver, Phillips screwdriver, Spirit level, Allen key (included).

Based on the official IKEA manual AA-1272094-9 (PDF). Guide updated .

BESTÅ frame: quick facts
Steps16
Time30–45 min
People1
ToolsFlat screwdriver, Phillips screwdriver, Spirit level, Allen key (included)
Size60×40×192 cm (23 5/8×15 3/4×75 5/8")
Official manualAA-1272094-9
IKEA article number002.473.70
Pieces in the box45

In the box

PartPart numberQuantity
Side panel2
Top panel1
Bottom panel1
Back panel1
Cam screw1306188
Cam lock1229718
Foot1149474
Allen key1000061
Wall spacer fitting1414132
Spacer knob1414142
Washer1269162
Cover cap1331942
Bracket1149294
Screw1166374
Screw 114667 (joining frames)3

Steps

  1. Feet into the bottom panel — Lay the top and bottom panels flat on a rug or the empty box. The bottom panel is the one with 4 holes in its underside: screw the 4 feet into them by hand. Check: Work on a soft surface so the panels do not get scratched.
  2. Cam screws into the top and bottom panels — Turn the bottom panel over so it stands on its feet. Screw 4 cam screws (130618) into the inner face of each panel, near the corners, with a Phillips screwdriver. Check: Do not use a power drill.
  3. Side panels and top panel — Stand both side panels on their back edges, shelf-pin holes facing each other. Tip the top panel up, then push it onto the top ends of the side panels so its cam screws go into the holes. Check: The grooves for the back panel must all be on the floor side.
  4. Lock the top end: 4 cam locks — Push a cam lock (122971) into each of the 4 holes next to the top panel and turn it clockwise with a flat screwdriver until it grips the cam screw.
  5. Slide in the back panel — Slide the back panel, finished side facing in, into the grooves of the side panels from the open end, until it sits in the groove of the top panel.
  6. Fit the bottom panel — Tip the bottom panel up, feet facing out, and push it onto the open end: the cam screws go into the side panels and the edge of the back panel goes into its groove.
  7. Lock the bottom end: 4 cam locks — Push in the last 4 cam locks next to the bottom panel and turn each one clockwise to lock it.
  8. Stand it up, spacer fittings in the back — Stand the frame up and turn it round so the back faces you. Press the 2 spacer fittings (141413) into the holes on the inside of the side panels, near the top, behind the back panel.
  9. Level the feet — Turn the frame to face you and level it. Adjust the 2 back feet from inside the frame with the allen key (100006) through the holes in the bottom panel, and turn the 2 front feet by hand.
  10. No skirting board: fix to the wall — If the wall has no skirting board, stand the frame right against it. Put a washer (126916) on each of the 2 marked spots at the top of the back panel, screw through into the wall, then click a cover cap (133194) over each washer. Check: Must be fixed to the wall to prevent tip-over. Wall screws and plugs are not included: use ones that suit your wall. Fit the washers the right way round, as shown in the manual. Skirting board? Skip to step 11.
  11. Skirting board: screw on the knobs — With a skirting board, use steps 11–13 instead of step 10. Turn the frame so the back faces you and screw a knob (141414) onto each spacer fitting, all the way in.
  12. Against the wall, knobs out to the wall — Turn the frame round and stand it against the wall, its base touching the skirting board. Then turn both knobs out until they rest against the wall.
  13. Fix to the wall — Fix the frame to the wall exactly as in step 10: washer (126916), a wall screw that suits your wall, then click on the cover cap (133194). Check: Must be fixed to the wall to prevent tip-over. Wall screws and plugs are not included.
  14. Info: brackets for the tall side panels — The info page shows the 4 brackets (114929) screwed to the inside of the side panels with the 4 screws (116637), so the shelves (sold separately) are held and the tall sides cannot bow outwards. Shelves are fitted on shelf pins as described in their own manual.
  15. Info: joining two frames — Only when you join this frame to another BESTÅ frame: stand them side by side and screw the 3 screws (114667) through the side panel into the next frame, at the 3rd hole from the top, the 3rd from the bottom and the middle.
  16. Done! — Your BESTÅ frame is assembled, levelled and fixed to the wall. Doors, drawers, shelves and legs are sold separately and have their own manuals.

BESTÅ frame: questions and answers

How long does it take to assemble the IKEA BESTÅ frame?

About 30–45 min for 1 person, working through the 16 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the BESTÅ frame?

Flat screwdriver, Phillips screwdriver, spirit level, Allen key (included). Already in the box: Allen key.

Can one person assemble the BESTÅ frame?

Yes, it is a one-person build.

Does the BESTÅ frame need to be fixed to the wall?

The manual shows a wall fixing: see step 10 (No skirting board: fix to the wall) and step 13 (Fix to the wall). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.

What size is the BESTÅ frame once assembled?

60×40×192 cm (23 5/8×15 3/4×75 5/8"), as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the BESTÅ frame?

36 fittings of 9 kinds, the most numerous being 8 × cam screw, 8 × cam lock, 4 × foot. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA BESTÅ frame assembly instructions PDF?

The official PDF is manual AA-1272094-9, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 002.473.70; other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-1272094-9. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example cam screw 130618). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All IKEA BESTÅ assembly guides · All bookcases & shelves assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained