Step by StepAssembly Find your furniture

IKEA VESKEN shelf unit assembly instructions

How to assemble the IKEA VESKEN shelf unit, step by step: 14 animated steps built from the official manual, about 15 min for 1 person, with pencil, screwdriver (for the wall screws).

IKEA VESKEN shelf unit, assembled

A narrow four-shelf unit in moulded white plastic for the bathroom: perforated shelves and short legs that simply click into each other, then two small brackets hold it to the wall. Size: 36x23x100 cm. About 15 min, 1 person. Tools: Pencil, Screwdriver (for the wall screws).

Based on the official IKEA manual AA-1842283-5 (PDF). Guide updated .

VESKEN shelf unit: quick facts
Steps14
Time15 min
People1
ToolsPencil, Screwdriver (for the wall screws)
Size36x23x100 cm
Official manualAA-1842283-5
IKEA article number403.078.66 (white)
Pieces in the box26

In the box

PartPart numberQuantity
Shelf (perforated tray)4
Leg12
Foot (short leg)4
Top cap4
Wall bracket2

Steps

  1. Feet into the first shelf — Hold one shelf up, the hollow tub facing up. Push a short foot up into the hole under each of its 4 corners until it is firmly in. The smooth side of each foot faces out.
  2. First 4 legs — Push a leg straight down into each corner of the shelf until it clicks. The smooth side of every leg faces out, the open, ribbed side faces in. Check: The spring catch at the bottom of each leg is what clicks into the corner. Listen for the click on every leg.
  3. Second shelf — Lower the second shelf, tub facing up, level onto the 4 legs so the tab on top of each leg goes into a corner. Then press it down until it sits firmly on all 4 legs.
  4. Next 4 legs — Click 4 more legs down into the corners of the second shelf, turned the same way as the legs below them. Check: Each leg must click in.
  5. Third shelf — Lower the third shelf level onto the legs, then press it down onto all 4 tabs.
  6. Last 4 legs — Click the last 4 legs down into the corners of the third shelf, turned the same way as the others.
  7. Top shelf — Lower the last shelf level onto the legs, then press it down on all 4 corners.
  8. Caps on top — Push a cap into the hole on top of each corner of the top shelf.
  9. Stand it against the wall — Put the unit where it will stand, with its back flat against the wall. Check: Must be fixed to the wall to stop it tipping over.
  10. Mark a line under the top shelf — Reach in under the top shelf and draw a pencil line on the wall along the underside of its back rim, from side to side.
  11. Mark the bracket holes — Move the unit away. Hold the 2 brackets on the line, 240 mm apart (centre to centre) and centred on where the unit stands, and mark each screw hole.
  12. Screw the brackets to the wall — Screw both brackets to the wall (with plugs if your wall needs them). Check: Screws not included. Use pan-head screws, not countersunk.
  13. Hang the unit on the brackets — Lift the unit a little, put it back against the wall with the top shelf's back rim above the brackets, then lower it onto them. Check: Max load 4 kg per shelf.
  14. Done! — Your VESKEN shelf unit is assembled and fixed to the wall. Max load 4 kg per shelf.

VESKEN shelf unit: questions and answers

How long does it take to assemble the IKEA VESKEN shelf unit?

About 15 min for 1 person, working through the 14 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the VESKEN shelf unit?

Pencil, screwdriver (for the wall screws).

Can one person assemble the VESKEN shelf unit?

Yes, it is a one-person build.

Does the VESKEN shelf unit need to be fixed to the wall?

The manual shows a wall fixing: see step 12 (Screw the brackets to the wall) and step 14 (Done). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.

What size is the VESKEN shelf unit once assembled?

36x23x100 cm, as given for this model. Leave extra floor space around it while you build.

Where can I download the IKEA VESKEN shelf unit assembly instructions PDF?

The official PDF is manual AA-1842283-5, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 403.078.66 (white); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-1842283-5. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

Related assembly guides

All IKEA VESKEN assembly guides · All bookcases & shelves assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained