Step by StepAssembly Find your furniture

IKEA VESKEN trolley assembly instructions

How to assemble the IKEA VESKEN trolley (cart), step by step: 8 animated steps built from the official manual, about 10 min for 1 person, no tools needed.

IKEA VESKEN trolley, assembled

A slim three-shelf trolley in white moulded plastic that rolls into narrow gaps: the castors, legs, shelves and caps simply click together, no tools needed. Size: 54x18x71 cm. About 10 min, 1 person. Tools: No tools needed.

Based on the official IKEA manual AA-2203938-2 (PDF). Guide updated .

VESKEN trolley: quick facts
Steps8
Time10 min
People1
ToolsNo tools needed
Size54x18x71 cm
Official manualAA-2203938-2
IKEA article number004.712.22 (white)
Pieces in the box23

In the box

PartPart numberQuantity
Shelf3
Leg8
Castor housing L2
Castor housing R2
Wheel4
Top cap4

Steps

  1. Put the castors together — Stand each wheel on its edge and push a castor housing straight down over it until the axle clicks into the notches in both sides of the fork. Check: There are 2 L and 2 R housings. They only differ in how the flat stem on top is turned, so keep track of which is which for the next step.
  2. Castors into the first shelf — Hold a shelf up, hollow side up. Push a castor straight up into the hole under each of its 4 corners until it is firmly in: the L castors go at the back-left and front-right corners, the R castors at the back-right and front-left. All 4 wheels roll the same way, along the length of the trolley.
  3. First 4 legs — Push a leg straight down into each corner of the shelf until it clicks. The smooth side of every leg faces out, the open, ribbed side faces in: the front-left leg shows its smooth face to the front. Check: The springy catch at the bottom of each leg is what clicks into the corner. Listen for the click on every leg.
  4. Second shelf — Lower the second shelf, hollow side up, level onto the 4 legs so the tab on top of each leg goes into a corner. Then press it down until it sits firmly on all 4 legs.
  5. Last 4 legs — Click the other 4 legs down into the corners of the second shelf, turned the same way as the legs below them. Check: Each leg must click in.
  6. Top shelf — Lower the last shelf level onto the legs, then press it down on all 4 corners.
  7. Caps on top — Push a cap into the hole on top of each corner of the top shelf, its prong into the slot.
  8. Done! — Your VESKEN trolley is assembled. Max load 6 kg in total.

VESKEN trolley: questions and answers

How long does it take to assemble the IKEA VESKEN trolley?

About 10 min for 1 person, working through the 8 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the VESKEN trolley?

No tools. Everything fits together by hand.

Can one person assemble the VESKEN trolley?

Yes, it is a one-person build.

What size is the VESKEN trolley once assembled?

54x18x71 cm, as given for this model. Leave extra floor space around it while you build.

Where can I download the IKEA VESKEN trolley assembly instructions PDF?

The official PDF is manual AA-2203938-2, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 004.712.22 (white); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-2203938-2. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

Related assembly guides

All IKEA VESKEN assembly guides · All kitchen & carts assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained