Step by StepAssembly Find your furniture

IKEA NISSAFORS trolley assembly instructions

How to assemble the IKEA NISSAFORS trolley (cart), step by step: 12 animated steps built from the official manual, about 30–45 min for 1 person, with Allen key (included).

IKEA NISSAFORS trolley, assembled

Black steel trolley on castors: three sheet-steel trays (perforated, plain and deep) put together with click-in plastic clips, screwed between two U-shaped tube frames. Size: 50.5×30×83 cm (19 7/8×11 3/4×32 5/8"). About 30–45 min, 1 person. Tools: Allen key (included).

Based on the official IKEA manual AA-2119159-10 (PDF). Guide updated .

NISSAFORS trolley: quick facts
Steps12
Time30–45 min
People1
ToolsAllen key (included)
Size50.5×30×83 cm (19 7/8×11 3/4×32 5/8")
Official manualAA-2119159-10
IKEA article number203.997.77 (black)
Pieces in the box74

In the box

PartPart numberQuantity
U-shaped tube frame2
Tray base (1 perforated, 1 plain, 1 deep)3
Tray end piece6
Tray front/back rail6
Plastic plug1000547118
Plastic pin1000548518
Screw19041916
Castor100548524
Allen key1900941

Steps

  1. Base plates onto the end pieces — Build the three trays the same way: the perforated one, the plain one and the deep one. Lay each base plate on a soft surface and slide an end piece onto each short end, so the edge of the plate rests on the folded lip of the end piece. Check: Work on a rug or the flattened box so the black finish does not get scratched.
  2. 2 clips per tray — Push a plastic plug (10005471) into the hole in the middle next to each end piece, then press a pin (10005485) into the plug until it clicks. That locks the base plate to both end pieces. 2 plugs and 2 pins per tray.
  3. Front and back rails — Slide the front rail and the back rail in from the long sides, with their folded lip under the edge of the base plate. Their ends go over the folded corners of the end pieces (4 corners per tray).
  4. 4 more clips per tray — Lock the rails with 4 more plugs (10005471) and pins (10005485): 2 along the front rail and 2 along the back rail. Press each pin in until it clicks. The 3 trays are now ready.
  5. First frame, deep tray — Lay one U-shaped frame flat on the floor. Stand the deep tray on edge on its open end, with the open side of the tray towards the closed end of the frame. Fix it with 4 screws (190419) from inside the tray, through the end piece into the frame: turn them in, then a little more with the long end of the allen key (190094). Check: Do not tighten the screws fully yet; leave them slightly loose until step 7.
  6. Plain and perforated trays — Stand the plain tray in the middle of the frame and the perforated tray at the closed end, open sides the same way. Fix each with 2 screws (190419) and the allen key, again only slightly loose: 8 screws in this frame in total. Check: Leave the screws slightly loose until step 7.
  7. Turn it over, second frame — Turn the whole thing over so the first frame is on top. Lay the second frame on the floor with its open end on the same side as the first one, and lower the trays onto it.
  8. 8 screws into the second frame — Fix the trays to the second frame with 8 screws (190419) through the end pieces, the same way as before: 4 in the deep tray, 2 in each of the others. Leave them slightly loose for now. Check: Leave the screws slightly loose until all 16 are in.
  9. Tighten the 8 bottom screws — Now that all 16 screws are in, tighten them firmly. Start with the 8 at the bottom of the trays: put the short end of the allen key in each screw and turn it with the long end.
  10. Tighten the other 8 — Then the 8 screws of the first frame, now at the top inside each tray: reach in from the open side and tighten them the same way.
  11. Castors — Turn the trolley upside down so it stands on the closed ends of the frames. Push a castor (10054852) into each of the 4 open tube ends until it clicks.
  12. Done! — Turn the trolley over onto its castors. Your NISSAFORS trolley is ready. Max load 7 kg per tray, 21 kg in total.

NISSAFORS trolley: questions and answers

How long does it take to assemble the IKEA NISSAFORS trolley?

About 30–45 min for 1 person, working through the 12 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the NISSAFORS trolley?

Allen key (included). Already in the box: Allen key.

Can one person assemble the NISSAFORS trolley?

Yes, it is a one-person build.

What size is the NISSAFORS trolley once assembled?

50.5×30×83 cm (19 7/8×11 3/4×32 5/8"), as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the NISSAFORS trolley?

56 fittings of 4 kinds, the most numerous being 18 × plastic plug, 18 × plastic pin, 16 × screw. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA NISSAFORS trolley assembly instructions PDF?

The official PDF is manual AA-2119159-10, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 203.997.77 (black); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-2119159-10. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example plastic plug 10005471). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All kitchen & carts assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained