Step by StepAssembly Find your furniture

IKEA FÖRHÖJA kitchen trolley assembly instructions

How to assemble the IKEA FÖRHÖJA kitchen trolley (cart), step by step: 16 animated steps built from the official manual, about 60–90 min for 1 person, with Allen key 100092 + handle 121030 (included), Phillips screwdriver, flat screwdriver.

IKEA FÖRHÖJA kitchen trolley, assembled

Solid birch kitchen trolley with a tabletop, two drawers and two slatted shelves, on two castors. Size: 100×43×90 cm (39 3/8×16 7/8×35 3/8"). About 60–90 min, 1 person. Tools: Allen key 100092 + handle 121030 (included), Phillips screwdriver, Flat screwdriver.

Based on the official IKEA manual AA-55964-12 (PDF). Guide updated .

FÖRHÖJA kitchen trolley: quick facts
Steps16
Time60–90 min
People1
ToolsAllen key 100092 + handle 121030 (included), Phillips screwdriver, Flat screwdriver
Size100×43×90 cm (39 3/8×16 7/8×35 3/8")
Official manualAA-55964-12
IKEA article number800.359.20 (birch)
Pieces in the box72

In the box

PartPart numberQuantity
End frame1
End frame with castors1
Shelf rail4
Slat20
Drawer-frame rail2
Drawer-frame crosspiece2
Divider1
Tabletop1
Drawer2
Screw10432112
Cam screw1183312
Wooden dowel10135012
Screw1095328
Cam lock1134342
Allen-key handle1210301
Allen key1000921

Steps

  1. Slats into a shelf rail — Build both shelves the same way. Lay one shelf rail on its side on the floor, pin holes facing up. Push the pins of the 10 slats into it. The 5th slat, the one with the screw pockets, goes in the middle with its pockets facing the same way as in the drawing.
  2. Second rail on — Tip each half-built shelf over so it lies flat with the slats pointing away from you. Press the second shelf rail onto the free pins of all 10 slats, end holes one above the other.
  3. Screw the middle slat — Turn each shelf over. Drive a screw 109532 at an angle through each pocket under the middle slat into the rail, 2 per shelf, with a Phillips screwdriver.
  4. Drawer frame — Lay one drawer-frame rail on the floor. Push the pins of the two crosspieces (one at each end) and of the divider (in the middle, board standing up) into it. Then press the second rail onto the other ends.
  5. Shelves into the end frame — Lay the end frame without castors flat on the floor, inside face up. Push a dowel into each end of every shelf rail, 8 in total. Stand both shelves on end in the frame, each one level with a crossrail, and press the dowels into the holes in the legs.
  6. Drawer frame into the end frame — Push a dowel into each end of both drawer-frame rails, 4 in total. Stand the drawer frame on end in the top of the end frame, the divider pointing out towards the top board, and press its dowels into the holes.
  7. End frame with castors on top — Slide the allen key into its handle. Lower the end frame with castors onto the free dowels. Fix it with 6 screws 104321, one into each rail end, turning clockwise.
  8. Stand it up — Tip the trolley up onto its legs, pivoting on the bottom of the end frame without castors.
  9. Screw the other end frame — Fix the end frame without castors with the last 6 screws 104321, one into each rail end, with the allen key in its handle.
  10. Cam screws into the tabletop — Lay the tabletop upside down on a soft surface. Screw the 2 cam screws 118331 into the two holes in the middle, between the battens, with a Phillips screwdriver.
  11. Tabletop on — Turn the tabletop over and lower it onto the trolley, battens just inside the end frames, so the cam screws go into the holes in the top of the divider.
  12. Lock the cam locks — Through the left drawer opening, push the 2 cam locks 113434 into the holes in the divider, over the cam screws. Turn each one clockwise with a flat screwdriver to pull the tabletop down tight.
  13. Tabletop screws: left end — Drive 2 screws 109532 through the top board of the end frame without castors into the batten under the tabletop, with a Phillips screwdriver.
  14. Tabletop screws: castor end — Fix the other end the same way: 2 screws 109532 through the top board of the end frame with castors into the batten.
  15. Drawers in — Line each drawer up in front of its opening, finger notch at the top front, and slide it in over the drawer frame until it is flush.
  16. Done! — Your FÖRHÖJA kitchen trolley is ready. Lift the end without castors to roll it.

FÖRHÖJA kitchen trolley: questions and answers

How long does it take to assemble the IKEA FÖRHÖJA kitchen trolley?

About 60–90 min for 1 person, working through the 16 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the FÖRHÖJA kitchen trolley?

Allen key 100092 + handle 121030 (included), Phillips screwdriver, flat screwdriver. Already in the box: Allen key 100092 + handle 121030.

Can one person assemble the FÖRHÖJA kitchen trolley?

Yes, it is a one-person build.

What size is the FÖRHÖJA kitchen trolley once assembled?

100×43×90 cm (39 3/8×16 7/8×35 3/8"), as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the FÖRHÖJA kitchen trolley?

37 fittings of 6 kinds, the most numerous being 12 × screw, 12 × wooden dowel, 8 × screw. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA FÖRHÖJA kitchen trolley assembly instructions PDF?

The official PDF is manual AA-55964-12, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 800.359.20 (birch); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-55964-12. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example screw 104321). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All kitchen & carts assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained