IKEA BROR trolley assembly instructions
How to assemble the IKEA BROR trolley (cart), step by step: 13 animated steps built from the official manual, about 40 min for 1 person, with Allen key 100092 (included), spanner 110470 (included).
A sturdy black steel trolley with three pine plywood shelves: four angle legs are bolted to the shelf frames with corner brackets, then four braked castors are fixed with nuts inside the legs. Size: 85x55x88 cm. About 40 min, 1 person. Tools: Allen key 100092 (included), Spanner 110470 (included).
Based on the official IKEA manual AA-2059059-8 (PDF). Guide updated .
| Steps | 13 |
|---|---|
| Time | 40 min |
| People | 1 |
| Tools | Allen key 100092 (included), Spanner 110470 (included) |
| Size | 85x55x88 cm |
| Official manual | AA-2059059-8 |
| IKEA article number | 603.338.50 (black pine plywood) |
| Pieces in the box | 57 |
In the box
| Part | Part number | Quantity |
|---|---|---|
| Shelf frame with plywood shelf | 3 | |
| Leg | 4 | |
| Corner bracket | 10050776 | 12 |
| Bolt | 10042206 | 24 |
| Castor with brake | 124245 | 4 |
| Washer | 108383 | 4 |
| Flange nut | 145714 | 4 |
| Allen key | 100092 | 1 |
| Spanner | 110470 | 1 |
Steps
- First leg — Lay one shelf frame upside down on a soft surface. Slide a leg onto one corner from the outside, along the long side, so it wraps around the corner. Then put a corner bracket (10050776) inside the frame's corner, under the edge, its holes lined up with the holes in the leg.
- Bolt the first leg — From the outside, screw 2 bolts (10042206) through the leg and the frame into the bracket, one on each side of the corner, and turn them with the Allen key. Check: Only snug the bolts for now: all 24 are tightened at the end, once the trolley stands on its castors.
- Second leg — Fit a second leg to another corner of the frame in the same way: leg on the outside, bracket inside the corner, 2 bolts through the leg and the frame into the bracket, snugged with the Allen key.
- Last two legs — Fit the last 2 legs to the remaining corners the same way, each with a bracket and 2 bolts.
- Middle shelf — Tilt the second shelf frame, also upside down, to pass it between the plates at the leg ends, then level it at the first pair of holes above the shelf on the floor. Fix the first corner like the legs: a bracket inside the corner and 2 bolts through the leg and the frame. Check: The legs have a second pair of holes lower down: the manual shows the middle shelf can go high or low. This guide uses the high position, as drawn in the steps.
- Fix the middle shelf — Fix the other 3 corners of the middle shelf in the same way, each with a bracket inside the corner and 2 bolts through the leg.
- Bottom shelf — Pass the third shelf frame between the legs in the same way, tilted and upside down, and level it at the holes nearest the leg ends. Fix the first corner with a bracket and 2 bolts.
- Fix the bottom shelf — Fix the other 3 corners of the bottom shelf with a bracket and 2 bolts each.
- First castor — Put a washer (108383) on the plate at the end of a leg and push the castor's threaded stem through it. From inside the leg, screw a flange nut (145714) onto the stem by hand while the spanner (110470) holds the hex on the castor.
- Other castors — Fit the other 3 castors the same way: washer on the plate, castor stem through it, nut screwed on inside the leg while the spanner holds the castor.
- Turn it over — Turn the trolley over so it stands on its 4 castors. Check: The trolley is big and awkward to turn: ask a second person to help.
- Tighten all bolts — Go round all 4 legs and tighten every bolt firmly with the Allen key: 6 on each leg, 24 in all.
- Done! — Your BROR trolley is assembled. Roll it where you need it.
BROR trolley: questions and answers
How long does it take to assemble the IKEA BROR trolley?
About 40 min for 1 person, working through the 13 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.
What tools do I need for the BROR trolley?
Allen key 100092 (included), spanner 110470 (included). Already in the box: Allen key 100092, Spanner 110470.
Can one person assemble the BROR trolley?
Yes, it is a one-person build.
What size is the BROR trolley once assembled?
85x55x88 cm, as given for this model. Leave extra floor space around it while you build.
How many screws and fittings come with the BROR trolley?
48 fittings of 5 kinds, the most numerous being 24 × bolt, 12 × corner bracket, 4 × castor with brake. The In the box table lists every one with its part number, so you can count them before you start.
Where can I download the IKEA BROR trolley assembly instructions PDF?
The official PDF is manual AA-2059059-8, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 603.338.50 (black pine plywood); other colours have their own numbers but usually the same manual.
Which IKEA manual is this guide based on?
The official manual AA-2059059-8. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.
What if a part or screw is missing?
Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example corner bracket 10050776). IKEA customer service can send replacement fittings using that number.
Related assembly guides
- IKEA BROR work bench assembly instructions
- IKEA NISSAFORS trolley assembly instructions
- IKEA VESKEN trolley assembly instructions
- IKEA HORNAVAN trolley assembly instructions
- IKEA RÅSKOG trolley assembly instructions
- IKEA ÖVNING trolley assembly instructions
- IKEA TORNVIKEN kitchen island assembly instructions
- IKEA FÖRHÖJA kitchen trolley assembly instructions
All IKEA BROR assembly guides · All kitchen & carts assembly guides · All furniture assembly guides
Stuck on a step? Common assembly problems and fixes · Furniture hardware explained