IKEA BROR work bench assembly instructions
How to assemble the IKEA BROR work bench, step by step: 13 animated steps built from the official manual, about 40 min for 1 person, with Allen key 100092 (included).
A sturdy black steel work bench with three pine plywood shelves: four angle legs with plastic feet are bolted to the shelf frames with corner brackets. Size: 110x55x88 cm. About 40 min, 1 person. Tools: Allen key 100092 (included).
Based on the official IKEA manual AA-2058806-7 (PDF). Guide updated .
| Steps | 13 |
|---|---|
| Time | 40 min |
| People | 1 |
| Tools | Allen key 100092 (included) |
| Size | 110x55x88 cm |
| Official manual | AA-2058806-7 |
| IKEA article number | 303.332.86 (black pine plywood) |
| Pieces in the box | 48 |
In the box
| Part | Part number | Quantity |
|---|---|---|
| Shelf frame with plywood shelf | 3 | |
| Leg | 4 | |
| Foot | 192249 | 4 |
| Corner bracket | 10050776 | 12 |
| Bolt | 10042206 | 24 |
| Allen key | 100092 | 1 |
Steps
- Feet on the legs — Lay the 4 legs on the floor. Push a plastic foot (192249) onto one end of each leg, so both edges of the steel angle slide into the groove in the foot.
- First leg on the top — Lay the top shelf frame upside down on a rug. Stand a leg on its top end, feet up, and slide it onto one corner from the outside, along the long side. Put a corner bracket (10050776) inside the corner, its holes lined up with the holes in the leg.
- Bolt the first leg — From the outside, screw 2 bolts (10042206) through the leg and the frame into the bracket, one on each side of the corner, and turn them with the Allen key. Check: Only snug the bolts for now: all 24 are tightened at the end, once the bench stands on its feet.
- Second leg — Fit a second leg to the other end of the same long side in the same way: leg on the outside, bracket inside the corner, 2 bolts through the leg and the frame into the bracket, snugged with the Allen key.
- Third leg — Fit the third leg to a corner on the other long side the same way: leg on the outside, a bracket inside the corner and 2 bolts, snugged with the Allen key.
- Last leg — Fit the last leg to the remaining corner the same way, with a bracket and 2 bolts.
- Middle shelf — Tilt the second shelf frame, also upside down, to pass it between the feet, then level it at the first pair of holes above the top. Fix the first corner like the legs: a bracket inside the corner and 2 bolts through the leg and the frame. Check: The legs have spare holes: the manual shows other shelf heights. This guide uses the positions drawn in the steps.
- Fix the middle shelf — Fix the other 3 corners of the middle shelf in the same way, each with a bracket inside the corner and 2 bolts through the leg.
- Bottom shelf — Pass the third shelf frame between the legs the same way, tilted and upside down, and level it at the fourth pair of holes from the top, past the spare pair. Fix the first corner with a bracket and 2 bolts.
- Fix the bottom shelf — Fix the other 3 corners of the bottom shelf with a bracket and 2 bolts each.
- Turn it over — Turn the bench over so it stands on its 4 feet. Check: The bench is big and awkward to turn: ask a second person to help.
- Tighten all bolts — Go round all 4 legs and tighten every bolt firmly with the Allen key: 6 on each leg, 24 in all.
- Done! — Your BROR work bench is assembled. Check that all 24 bolts are tight before you load it.
BROR work bench: questions and answers
How long does it take to assemble the IKEA BROR work bench?
About 40 min for 1 person, working through the 13 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.
What tools do I need for the BROR work bench?
Allen key 100092 (included). Already in the box: Allen key 100092.
Can one person assemble the BROR work bench?
Yes, it is a one-person build.
What size is the BROR work bench once assembled?
110x55x88 cm, as given for this model. Leave extra floor space around it while you build.
How many screws and fittings come with the BROR work bench?
40 fittings of 3 kinds, the most numerous being 24 × bolt, 12 × corner bracket, 4 × foot. The In the box table lists every one with its part number, so you can count them before you start.
Where can I download the IKEA BROR work bench assembly instructions PDF?
The official PDF is manual AA-2058806-7, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 303.332.86 (black pine plywood); other colours have their own numbers but usually the same manual.
Which IKEA manual is this guide based on?
The official manual AA-2058806-7. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.
What if a part or screw is missing?
Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example foot 192249). IKEA customer service can send replacement fittings using that number.
Related assembly guides
- IKEA BROR trolley assembly instructions
- IKEA MARIUS stool assembly instructions
- IKEA BEKVÄM step stool assembly instructions
- IKEA LÄTT children's table with 2 chairs assembly instructions
- IKEA STIG bar stool with backrest assembly instructions
- IKEA FRANKLIN bar stool with backrest, foldable assembly instructions
- IKEA MAMMUT children's stool assembly instructions
- IKEA BRIMNES TV bench assembly instructions
All IKEA BROR assembly guides · All chairs & stools assembly guides · All furniture assembly guides
Stuck on a step? Common assembly problems and fixes · Furniture hardware explained