IKEA BESTÅ drawer frame assembly instructions
How to assemble the IKEA BESTÅ drawer frame, step by step: 16 animated steps built from the official manual, about 15–20 min for 1 person, with flat & Phillips screwdriver.
Drawer for a BESTÅ frame: a click-together box with corner profiles, a slide-in bottom, a cam-locked BESTÅ front and couplings for the drawer runners. Size: 60x15x40 cm. About 15–20 min, 1 person. Tools: Flat & Phillips screwdriver.
Based on the official IKEA manual AA-1883075-4 (PDF). Guide updated .
| Steps | 16 |
|---|---|
| Time | 15–20 min |
| People | 1 |
| Tools | Flat & Phillips screwdriver |
| Size | 60x15x40 cm |
| Official manual | AA-1883075-4 |
| IKEA article number | 703.515.13 (white) |
| Pieces in the box | 16 |
In the box
| Part | Part number | Quantity |
|---|---|---|
| Cam lock | 119030 | 4 |
| Cam screw | 130449 | 4 |
| Back corner profile | 131369 | 2 |
| Hinge-hole cover | 133185 | 2 |
| Cover cap | 139251 | 2 |
| Runner coupling | 147191 | 2 |
Steps
- Corner profiles onto the back panel — Lay the back panel flat (the grey panel in the small picture), groove facing up and nearest you. Slide a corner profile (131369) onto each short end, from the far side towards you, until it stops. The drawer is built standing on its back.
- Push on the side panels — Stand a side panel on each end with its 3 large holes at the top, facing out. Push it from the near edge into the corner profile until it is flush with the back panel.
- Slide in the bottom panel — Lower the bottom panel from above into the grooves of both side panels and push it all the way down into the groove of the back panel.
- 38 cm front: cam screws in — This and the next 4 steps are for a 38 cm high BESTÅ front (sold separately); for a 26 cm front skip to “Or: a 26 cm front instead”. Lay the front face down on a rug. Screw 4 cam screws (130449) into the 2 marked holes near each short end with a Phillips screwdriver.
- Cover the hinge holes — The front is also drilled for door hinges. Press a cover (133185) into each of the 2 large round hinge holes at one end.
- Lay the front on the drawer — Turn the front over and lay it on the drawer so the 4 cam screws go into the holes in the front edges of the side panels. The hinge-hole covers end up at the left.
- Lock the cam screws — Push a cam lock (119030) into the middle and the top large hole of each side panel and turn it clockwise with a flat screwdriver until it grips the cam screw. Turn the drawer round to do the other side.
- Cover caps in the lowest holes — Press a cover cap (139251) into the lowest large hole of each side panel, the one without a cam lock. With the 38 cm front, skip ahead to the runner couplings (last step).
- Or: a 26 cm front instead — With a 26 cm high BESTÅ front, the next 5 steps replace the 38 cm front steps. They start again from the drawer without a front, so the 38 cm front and its fittings are taken away here.
- 26 cm front, lowest drawer — For the lowest drawer in a BESTÅ frame, lay the 26 cm front face down on a rug and screw the 4 cam screws (130449) into the row of holes shown, nearer the top edge, with a Phillips screwdriver. Check: For a drawer higher up in the frame, skip this step and use the next one.
- 26 cm front, higher drawer — For a drawer higher up in the frame, the 4 cam screws (130449) go into the other row of holes instead, about 2.5 cm further from the top edge, as shown. Then lay the front on the drawer (next step).
- Lay the front on the drawer — Turn the front over and lay it on the drawer so the 4 cam screws go into the holes in the front edges of the side panels.
- Lock the cam screws — Push a cam lock (119030) into the lowest and the top large hole of each side panel and turn it clockwise with a flat screwdriver until it grips the cam screw. Turn the drawer round to do the other side.
- Cover caps in the middle holes — Press a cover cap (139251) into the middle large hole of each side panel, the one without a cam lock.
- Clip on the runner couplings — Press a runner coupling (147191) into the 2 small holes underneath each side panel, near the front. The drawer clicks onto BESTÅ drawer runners (sold separately), fitted in the frame as their own manual shows.
- Done! — Your BESTÅ drawer is assembled. Fit the BESTÅ drawer runners in the frame and click the drawer onto them as the runner manual shows. Max load: 10 kg.
BESTÅ drawer frame: questions and answers
How long does it take to assemble the IKEA BESTÅ drawer frame?
About 15–20 min for 1 person, working through the 16 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.
What tools do I need for the BESTÅ drawer frame?
Flat & Phillips screwdriver.
Can one person assemble the BESTÅ drawer frame?
Yes, it is a one-person build.
What size is the BESTÅ drawer frame once assembled?
60x15x40 cm, as given for this model. Leave extra floor space around it while you build.
How many screws and fittings come with the BESTÅ drawer frame?
16 fittings of 6 kinds, the most numerous being 4 × cam lock, 4 × cam screw, 2 × back corner profile. The In the box table lists every one with its part number, so you can count them before you start.
Where can I download the IKEA BESTÅ drawer frame assembly instructions PDF?
The official PDF is manual AA-1883075-4, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 703.515.13 (white); other colours have their own numbers but usually the same manual.
Which IKEA manual is this guide based on?
The official manual AA-1883075-4. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.
What if a part or screw is missing?
Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example cam lock 119030). IKEA customer service can send replacement fittings using that number.
Related assembly guides
- IKEA BESTÅ frame assembly instructions
- IKEA BESTÅ TV bench assembly instructions
- IKEA HEMNES 3-drawer dresser assembly instructions
- IKEA MALM chest of 3 drawers assembly instructions
- IKEA ALEX drawer unit assembly instructions
- IKEA LENNART drawer unit assembly instructions
- IKEA MALM dressing table assembly instructions
- IKEA BRIMNES bedside table assembly instructions
All IKEA BESTÅ assembly guides · All dressers & drawers assembly guides · All furniture assembly guides
Stuck on a step? Common assembly problems and fixes · Furniture hardware explained