Step by StepAssembly Find your furniture

IKEA LACK coffee table assembly instructions

How to assemble the IKEA LACK coffee table, step by step: 10 animated steps built from the official manual, about 30 min for 1 person, with Phillips screwdriver, awl, hammer.

IKEA LACK coffee table, assembled

The classic LACK coffee table with a lower shelf. Legs screw into the top by hand; the shelf rests on 4 small angle brackets. Size: 90×55 cm (35 3/8×21 5/8"). About 30 min, 1 person. Tools: Phillips screwdriver, Awl, Hammer.

Based on the official IKEA manual AA-472482-3 (PDF). Guide updated .

LACK coffee table: quick facts
Steps10
Time30 min
People1
ToolsPhillips screwdriver, Awl, Hammer
Size90×55 cm (35 3/8×21 5/8")
Official manualAA-472482-3
IKEA article number401.042.94 (black brown)
Pieces in the box23

In the box

PartPart numberQuantity
Tabletop1
Leg4
Shelf1
Double-ended screw1159804
Screw1085304
Screw1090414
Angle bracket1202984
Drilling template1209381

Steps

  1. Screw the 4 double-ended screws into the top — Lay the tabletop upside down on a rug or the flattened box. Twist a double-ended screw (115980) into each corner hole by hand, clockwise, until half of it is in the top. Check: Always work on a soft surface: the top is easily damaged on a hard floor.
  2. Screw on the 4 legs — Twist each leg clockwise onto a screw until it sits tight against the top. Hand-tight is enough.
  3. Mark the bracket holes on 2 legs — Lay the table on one long edge. Hook the drilling template (120938) over the end of a bottom leg, push the awl through its hole to mark the screw hole, and lift the template off. Repeat on the other bottom leg.
  4. Screw on 2 angle brackets — Hold an angle bracket (120298) on each marked hole, tab pointing towards the inside of the table, and screw it to the leg with the longer screw 108530. Check: Use screw 108530 here, not the shorter 109041.
  5. Turn the table over and mark the other 2 legs — Turn the table over onto its other long edge. Mark the holes on the 2 legs that are now at the bottom with the template and the awl, just like before.
  6. Screw on the other 2 angle brackets — Screw an angle bracket (120298) onto each of these legs with screw 108530, tab pointing towards the inside of the table. Check: Use screw 108530 here, not the shorter 109041.
  7. Fit the shelf — Hold the shelf at an angle and tilt it in between the legs from the open side, past the brackets. Rest its lower edge on the bottom legs just above the bottom brackets, with the upper edge leaning towards the tabletop. Then swing the upper edge back until the shelf lies flat against all 4 brackets.
  8. Screw the shelf to the brackets — Fix the shelf with a short screw (109041) through the slot of each bracket into the shelf, in the order shown: the two top brackets first, then the two bottom ones.
  9. Stand the table up — Tip the table up onto its legs.
  10. Done! — Your LACK coffee table is ready.

LACK coffee table: questions and answers

How long does it take to assemble the IKEA LACK coffee table?

About 30 min for 1 person, working through the 10 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the LACK coffee table?

Phillips screwdriver, awl, hammer.

Can one person assemble the LACK coffee table?

Yes, it is a one-person build.

What size is the LACK coffee table once assembled?

90×55 cm (35 3/8×21 5/8"), as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the LACK coffee table?

17 fittings of 5 kinds, the most numerous being 4 × double-ended screw, 4 × screw, 4 × screw. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA LACK coffee table assembly instructions PDF?

The official PDF is manual AA-472482-3, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 401.042.94 (black brown); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-472482-3. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example double-ended screw 115980). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All IKEA LACK assembly guides · All tables assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained