Step by StepAssembly Find your furniture

IKEA SUNDVIK children's chair assembly instructions

How to assemble the IKEA SUNDVIK children's chair, step by step: 9 animated steps built from the official manual, about 15 min for 1 person, with Allen key (included), Phillips screwdriver.

A small painted wooden children's chair: two ready-made side frames joined by the backrest and two seat rails, with the seat screwed on from below. Size: 28×29 cm, 55 cm high, seat height 29 cm. About 15 min, 1 person. Tools: Allen key (included), Phillips screwdriver.

Based on the official IKEA manual AA-1462260-3 (PDF). Guide updated .

SUNDVIK children's chair: quick facts
Steps9
Time15 min
People1
ToolsAllen key (included), Phillips screwdriver
Size28×29 cm, 55 cm high, seat height 29 cm
Official manualAA-1462260-3
IKEA article number706.283.14 (blue)
Pieces in the box21

In the box

PartPart numberQuantity
Side frame (post, leg and rails)2
Backrest1
Seat rail2
Seat1
Dowel1013504
Screw1002196
Screw1095784
Allen key1000011

Steps

  1. Fit the backrest to the first side frame — Lay one side frame flat, the long rear post at the back. Push 2 dowels 101350 into the two holes near the top of the post, press the backrest down onto them, then push 2 more dowels into the holes in the backrest's upper edge. Check: Leave the third hole near the top of the post free: a screw goes through it later.
  2. Stand the two seat rails in — Stand the front seat rail on the holes at the top of the front leg and the rear seat rail on the holes in the middle of the post, and press their dowels in. Check: Turn both rails so their two screw holes face the feet end of the frame.
  3. Put the second side frame on top — Lay the second side frame on top, rear post over the backrest, and press it down onto the dowels of the backrest and both seat rails.
  4. Screw the top frame on — Drive 3 screws 100219 through the holes in the top side frame with the Allen key: one into the backrest, one into the rear seat rail and one into the front seat rail.
  5. Turn the chair over — Turn the chair over onto the screwed side, so the first side frame is on top.
  6. Screw the other frame on — Drive the other 3 screws 100219 through the side frame now on top with the Allen key: into the backrest, the rear seat rail and the front seat rail.
  7. Lower the chair onto the seat — Lay the seat face down on a table. Turn the chair upside down and lower it onto the seat, with the backrest hanging over the table edge and the rear posts in the seat's notches.
  8. Screw the seat on from below — Drive the 4 screws 109578 through the holes in the front and rear seat rails into the seat with a Phillips screwdriver. Check: The holes for these screws are under the two seat rails, two in each.
  9. Done! — Your SUNDVIK chair is ready. Turn it back onto its legs. Check the screws now and then and tighten them if needed.

SUNDVIK children's chair: questions and answers

How long does it take to assemble the IKEA SUNDVIK children's chair?

About 15 min for 1 person, working through the 9 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the SUNDVIK children's chair?

Allen key (included), Phillips screwdriver. Already in the box: Allen key.

Can one person assemble the SUNDVIK children's chair?

Yes, it is a one-person build.

What size is the SUNDVIK children's chair once assembled?

28×29 cm, 55 cm high, seat height 29 cm, as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the SUNDVIK children's chair?

14 fittings of 3 kinds, the most numerous being 6 × screw, 4 × dowel, 4 × screw. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA SUNDVIK children's chair assembly instructions PDF?

The official PDF is manual AA-1462260-3, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 706.283.14 (blue); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-1462260-3. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example dowel 101350). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All IKEA SUNDVIK assembly guides · All chairs & stools assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained