IKEA LISABO assembly instructions
2 animated assembly guides for the IKEA LISABO range: LISABO table and LISABO chair. They run from 5 to 10 steps and take from about 15 min (LISABO table) to about 20–30 min (LISABO chair); each is a one-person build.
Every LISABO guide
Each one is rebuilt step by step from its official IKEA manual, with the same parts, counts and order.
- IKEA LISABO table assembly instructions — 5 steps, about 15 min, 1 person. Dining table with an ash veneer top and solid birch legs that slide onto rails under the top and lock with 4 tool-tightened fittings.
- IKEA LISABO chair assembly instructions — 10 steps, about 20–30 min, 1 person. Solid ash dining chair: two leg frames that cross under the seat in a half-lap joint, a bent ash-veneer backrest and seat, all fixed with one Allen key.
Compare the LISABO models
Size, steps, time, people and tools for each model, from its manual.
| Model | Size | Steps | Time | People | Tools | Manual |
|---|---|---|---|---|---|---|
| LISABO table | 140×78 cm | 5 | 15 min | 1 | Hammer | AA-1970558-4 |
| LISABO chair | 46×51 cm, 80 cm high, seat height 45 cm (18 1/8×20 1/8", 31 1/2" high) | 10 | 20–30 min | 1 | Allen key (included) | AA-2174482-9 |
What the LISABO manuals warn about
Notes from the official manuals, at the step where they apply: check these before you get there.
- The gear wheel must face the leg. A fitting put in the wrong way round does not lock the leg. (LISABO table, step 2)
- Do not tighten the bolts fully yet: leave a small gap under the heads. (LISABO chair, step 5)
- Do not tighten fully yet: first get all 6 bolts started. (LISABO chair, step 8)
- Check the inset: the two tall back legs go at the back, side by side. If one tall leg ends up at the front, turn that frame round. (LISABO chair, step 1)
- The small hole goes on top. If you see the wide counterbored hole on top, turn the block over. (LISABO chair, step 2)
- The heads must sit flush, not stick out. (LISABO chair, step 4)
- The bolt heads must sit flush against the legs, not stick out. (LISABO chair, step 6)
- The heads must sit flush in the rails, not stick out. (LISABO chair, step 9)
LISABO: questions and answers
How long does it take to assemble IKEA LISABO furniture?
It depends on the model: the LISABO table takes about 15 min and the LISABO chair takes about 20–30 min. Times are for the planned number of people, working through the guide.
What tools do I need for IKEA LISABO?
Across the range the manuals call for hammer (1 of 2) and Allen key (1 of 2, supplied).
Can one person assemble IKEA LISABO?
Yes: every LISABO model here is a one-person build.
Which IKEA manuals are these LISABO guides based on?
LISABO table: AA-1970558-4; LISABO chair: AA-2174482-9. Compare the code with the one printed on your paper manual; if it differs, follow your manual.