IKEA SKOGSTA chair assembly instructions
How to assemble the IKEA SKOGSTA chair, step by step: 6 animated steps built from the official manual, about 15–20 min for 1 person, with Allen key (included), flat-blade screwdriver.
Solid acacia dining chair with a hooped spindle back: two leg frames and a cross stretcher bolted under the ready-made seat, with one Allen key and a flat screwdriver. Size: 46×55 cm, 94 cm high, seat height 46 cm (18 1/8×21 5/8", 37" high). About 15–20 min, 1 person. Tools: Allen key (included), Flat-blade screwdriver.
Based on the official IKEA manual AA-2376791-5 (PDF). Guide updated .
| Steps | 6 |
|---|---|
| Time | 15–20 min |
| People | 1 |
| Tools | Allen key (included), Flat-blade screwdriver |
| Size | 46×55 cm, 94 cm high, seat height 46 cm (18 1/8×21 5/8", 37" high) |
| Official manual | AA-2376791-5 |
| IKEA article number | 705.448.66 (acacia) |
| Pieces in the box | 21 |
In the box
| Part | Part number | Quantity |
|---|---|---|
| Seat with backrest | 1 | |
| Leg frame | 2 | |
| Cross stretcher | 1 | |
| Bolt 110467 (long) | 2 | |
| Bolt | 114575 | 6 |
| Split washer | 100842 | 6 |
| Barrel nut | 100514 | 2 |
| Allen key | 10083377 | 1 |
Steps
- Lay the seat upside down on a table — Spread a cloth or the flattened box on a table. Lay the seat upside down on it, with the backrest hanging down over the edge of the table, so the underside of the seat faces up. Check: The cloth protects the acacia seat from scratches.
- Fit the first leg frame — Place a leg frame on the underside of the seat, its rail over the 3 holes. Put a washer (100842) on each of 3 bolts (114575), push them through the rail and turn them into the seat by hand. Do not tighten them yet. Check: Use the short bolts 114575 here, not the long 110467. Leave the split washers uncompressed: the bolts are only finger-tight for now.
- Fit the second leg frame — Fit the second leg frame on the other side of the seat in the same way: 3 bolts (114575) with washers (100842) through the rail, turned in by hand and not yet tight. Check: Again use the short bolts 114575 and leave them finger-tight.
- Bolt in the cross stretcher — Lower the cross stretcher between the two side stretchers. Drop a barrel nut (100514) into the hole near each end and turn its slot with a flat screwdriver to line it up. Screw a long bolt (110467) through each side stretcher into the nut with the Allen key. Check: Line up the barrel nut slot with the bolt so the bolt can catch the thread.
- Tighten the 6 seat bolts — Now tighten all 6 bolts in the leg frame rails with the Allen key, until the split washers are pressed flat under the heads. Check: The washers must be flat: a split washer that still gapes means the bolt is not tight.
- Done! — Your SKOGSTA chair is ready. Lift it off the table and stand it on its legs. It is tested for 110 kg. Check the bolts now and then and tighten them again if needed.
SKOGSTA chair: questions and answers
How long does it take to assemble the IKEA SKOGSTA chair?
About 15–20 min for 1 person, working through the 6 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.
What tools do I need for the SKOGSTA chair?
Allen key (included), flat-blade screwdriver. Already in the box: Allen key.
Can one person assemble the SKOGSTA chair?
Yes, it is a one-person build.
What size is the SKOGSTA chair once assembled?
46×55 cm, 94 cm high, seat height 46 cm (18 1/8×21 5/8", 37" high), as given for this model. Leave extra floor space around it while you build.
How many screws and fittings come with the SKOGSTA chair?
14 fittings of 3 kinds, the most numerous being 6 × bolt, 6 × split washer, 2 × barrel nut. The In the box table lists every one with its part number, so you can count them before you start.
Where can I download the IKEA SKOGSTA chair assembly instructions PDF?
The official PDF is manual AA-2376791-5, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 705.448.66 (acacia); other colours have their own numbers but usually the same manual.
Which IKEA manual is this guide based on?
The official manual AA-2376791-5. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.
What if a part or screw is missing?
Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example bolt 110467). IKEA customer service can send replacement fittings using that number.
Related assembly guides
- IKEA SKOGSTA dining table assembly instructions
- IKEA MARIUS stool assembly instructions
- IKEA BEKVÄM step stool assembly instructions
- IKEA LÄTT children's table with 2 chairs assembly instructions
- IKEA STIG bar stool with backrest assembly instructions
- IKEA FRANKLIN bar stool with backrest, foldable assembly instructions
- IKEA MAMMUT children's stool assembly instructions
- IKEA BRIMNES TV bench assembly instructions
All IKEA SKOGSTA assembly guides · All chairs & stools assembly guides · All furniture assembly guides
Stuck on a step? Common assembly problems and fixes · Furniture hardware explained