IKEA SKOGSTA assembly instructions
2 animated assembly guides for the IKEA SKOGSTA range: SKOGSTA dining table and SKOGSTA chair. They run from 6 to 21 steps and take from about 15–20 min (SKOGSTA chair) to about 1 h (SKOGSTA dining table); 1 of 2 are planned for two people.
Every SKOGSTA guide
Each one is rebuilt step by step from its official IKEA manual, with the same parts, counts and order.
- IKEA SKOGSTA dining table assembly instructions — 21 steps, about 1 h, 2 people. Large solid acacia dining table with a two-piece top on two black leaning leg frames, joined by a long stretcher and a V-shaped brace.
- IKEA SKOGSTA chair assembly instructions — 6 steps, about 15–20 min, 1 person. Solid acacia dining chair with a hooped spindle back: two leg frames and a cross stretcher bolted under the ready-made seat, with one Allen key and a flat screwdriver.
Compare the SKOGSTA models
Size, steps, time, people and tools for each model, from its manual.
| Model | Size | Steps | Time | People | Tools | Manual |
|---|---|---|---|---|---|---|
| SKOGSTA dining table | 235×100 cm | 21 | 1 h | 2 | Allen key 100092 + handle 121030 (included), Flat-blade screwdriver | AA-1984886-6 |
| SKOGSTA chair | 46×55 cm, 94 cm high, seat height 46 cm (18 1/8×21 5/8", 37" high) | 6 | 15–20 min | 1 | Allen key (included), Flat-blade screwdriver | AA-2376791-5 |
What the SKOGSTA manuals warn about
Notes from the official manuals, at the step where they apply: check these before you get there.
- Use the long bolts 113152 here, not 104558. (SKOGSTA dining table, step 5)
- Use the short bolts 114575 here, not the long 110467. Leave the split washers uncompressed: the bolts are only finger-tight for now. (SKOGSTA chair, step 2)
- Check the lean: a frame put on the wrong way round has its legs leaning in towards the middle. (SKOGSTA dining table, step 10)
- Again use the short bolts 114575 and leave them finger-tight. (SKOGSTA chair, step 3)
- Check that every washer lies flat and is not bent. (SKOGSTA dining table, step 19)
- Line up the barrel nut slot with the bolt so the bolt can catch the thread. (SKOGSTA chair, step 4)
- The washer must lie flat under the bolt head. (SKOGSTA dining table, step 11)
- The washers must be flat: a split washer that still gapes means the bolt is not tight. (SKOGSTA chair, step 5)
SKOGSTA: questions and answers
How long does it take to assemble IKEA SKOGSTA furniture?
It depends on the model: the SKOGSTA dining table takes about 1 h and the SKOGSTA chair takes about 15–20 min. Times are for the planned number of people, working through the guide.
What tools do I need for IKEA SKOGSTA?
Needed for every SKOGSTA model here: flat-blade screwdriver. Across the range the manuals call for flat-blade screwdriver (2 of 2), Allen key + handle 121030 (1 of 2, supplied) and Allen key (1 of 2, supplied).
Can one person assemble IKEA SKOGSTA?
SKOGSTA chair is a one-person build; SKOGSTA dining table is planned for two people.
Which IKEA manuals are these SKOGSTA guides based on?
SKOGSTA dining table: AA-1984886-6; SKOGSTA chair: AA-2376791-5. Compare the code with the one printed on your paper manual; if it differs, follow your manual.