Step by StepAssembly Find your furniture

IKEA JANINGE bar stool assembly instructions

How to assemble the IKEA JANINGE bar stool, step by step: 13 animated steps built from the official manual, about 20–30 min for 1 person, with Allen keys (included), Phillips screwdriver.

IKEA JANINGE bar stool, assembled

A white height-adjustable bar stool: a gas spring bolted to a round steel base, a moulded polypropylene seat on a steel column with a release lever, a cover and a T-shaped footrest. Size: Seat 38×36 cm, base Ø42 cm, seat height 56–76 cm, 84 cm high (15×14 1/8", seat 22–29 7/8", 33 1/8" high). About 20–30 min, 1 person. Tools: Allen keys (included), Phillips screwdriver.

Based on the official IKEA manual AA-1263780-7 (PDF). Guide updated .

JANINGE bar stool: quick facts
Steps13
Time20–30 min
People1
ToolsAllen keys (included), Phillips screwdriver
SizeSeat 38×36 cm, base Ø42 cm, seat height 56–76 cm, 84 cm high (15×14 1/8", seat 22–29 7/8", 33 1/8" high)
Official manualAA-1263780-7
IKEA article number702.460.89 (white)
Pieces in the box24

In the box

PartPart numberQuantity
Base1
Gas spring1
Column with seat plate1
Adjustment lever1
Lever clip1
Seat1
Cover1
Footrest1
Socket screw1065744
Flange screw1425784
Screw1084584
Grub screw1421152
Allen key 114463 (large)1
Allen key 100092 (small)1

Steps

  1. Peel the film off the base and turn it over — Lay the round base on the floor, top side up. Peel the protective film off its top, then turn the base over so the underside with the four screw holes faces up.
  2. Bolt the gas spring to the base — Stand the base on its edge. Hold the wide end of the gas spring against the middle of the top and fix it from the underside with four socket screws 106574, tightened with the large Allen key 114463. Check: Use the large Allen key 114463 here, not the small 100092.
  3. Stand the base on the floor — Stand the base flat on the floor with the gas spring pointing straight up, and put it to one side while you build the seat.
  4. Push the lever into the seat plate — Stand the column on the floor, seat plate on top. Hold the release pin in the middle of the plate down with a finger and push the stainless lever in from the side, under the plate, until its end reaches the middle.
  5. Click the clip on, then turn the column over — Press the clip down over the inner end of the lever until it clicks. Then turn the column upside down, seat plate at the bottom. Check: Listen for the click: the clip holds the lever on the release pin.
  6. Screw the column to the seat — Lay the seat upside down. Lower the seat plate onto the four bosses, with the lever lying in the guide on the seat's side. Fix the plate with four flange screws 142578 using the small Allen key 100092. Check: Use the small Allen key 100092 here, not the large 114463.
  7. Slide the cover down the column — Turn the cover so its open side faces the seat and slide it down the column. Line its notch up with the lever so the lever passes through it, and press the cover onto the seat.
  8. Screw the cover to the seat — Fix the cover with four screws 108458, one in each corner hole, using a Phillips screwdriver.
  9. Slide the footrest onto the column — Peel the protective film off the top of the footrest's crossbar. Turn the footrest over and slide its square socket onto the stub at the end of the column, all the way on.
  10. Lock the footrest with two grub screws — Turn the two grub screws 142115 into the holes in the footrest's arm with the small Allen key 100092 and tighten them, so the footrest is held fast on the stub. Check: Use the small Allen key 100092, not the large 114463.
  11. Put the seat on the gas spring — Turn the seat and column over and lower the column straight down over the gas spring's pin, then press down on the seat so it sits firmly. Check: Do not try to replace or repair the gas spring yourself.
  12. Adjust the seat height — Sit on the stool and lift the lever: your weight lowers the seat. Lift the lever without sitting on it and the seat rises. Let go of the lever at the height you want. Check: The gas spring only lowers the seat with at least 50 kg on it.
  13. Done! — Your JANINGE bar stool is ready. Max load 110 kg. Wipe it clean with a mild soapy solution and dry it with a cloth.

JANINGE bar stool: questions and answers

How long does it take to assemble the IKEA JANINGE bar stool?

About 20–30 min for 1 person, working through the 13 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the JANINGE bar stool?

Allen keys (included), Phillips screwdriver. Already in the box: Allen keys.

Can one person assemble the JANINGE bar stool?

Yes, it is a one-person build.

What size is the JANINGE bar stool once assembled?

Seat 38×36 cm, base Ø42 cm, seat height 56–76 cm, 84 cm high (15×14 1/8", seat 22–29 7/8", 33 1/8" high), as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the JANINGE bar stool?

14 fittings of 4 kinds, the most numerous being 4 × socket screw, 4 × flange screw, 4 × screw. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA JANINGE bar stool assembly instructions PDF?

The official PDF is manual AA-1263780-7, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 702.460.89 (white); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-1263780-7. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example socket screw 106574). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All chairs & stools assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained