IKEA TRONES shoe cabinet/storage assembly instructions
How to assemble the IKEA TRONES shoe cabinet/storage, step by step: 8 animated steps built from the official manual, about 10–15 min for 1 person, with flat-blade screwdriver, pencil, spirit level, wall screws and plugs (not included).
A slim moulded-plastic shoe cabinet with a tilt-out door: it comes ready-made, so you take the door off, hang the cabinet on 4 wall screws and click the door back in. Size: 52x18x39 cm. About 10–15 min, 1 person. Tools: Flat-blade screwdriver, Pencil, Spirit level, Wall screws and plugs (not included).
Based on the official IKEA manual AA-53301-15 (PDF). Guide updated .
| Steps | 8 |
|---|---|
| Time | 10–15 min |
| People | 1 |
| Tools | Flat-blade screwdriver, Pencil, Spirit level, Wall screws and plugs (not included) |
| Size | 52x18x39 cm |
| Official manual | AA-53301-15 |
| IKEA article number | 003.973.07 (white) |
| Pieces in the box | 2 |
In the box
| Part | Part number | Quantity |
|---|---|---|
| Cabinet body (moulded) | 1 | |
| Tilting door | 1 |
Steps
- Take the door off — Stand the cabinet in front of you. Tilt the door open by pulling its top edge towards you, then pull the door forward so the two pins at its bottom corners come out of their clips. Put the door aside. Check: TRONES must be fixed to the wall to stop it tipping over. Wall screws and plugs are not included; choose ones that suit your wall.
- Mark the 2 upper holes — Hold the empty cabinet against the wall where you want it, back flat on the wall. Reach in and mark the wall with a pencil through the two keyhole slots near the top of the back.
- Drive the 2 upper wall screws — Take the cabinet down: your two marks are on the wall. Hold a spirit level on them to check they are level. Drill and plug them as your wall needs, then drive a screw into each mark. Stop while the screw heads still stand out from the wall by a few millimetres: the cabinet hangs on them. Check: Don't drive the screws all the way in. The heads must stand out from the wall, not sit flat against it.
- Hang it and mark the 2 lower holes — Hook the cabinet's two upper keyhole slots over the screw heads and let it drop down onto them. Then mark the wall through the two holes near the bottom of the back.
- Drive the 2 lower wall screws — Lift the cabinet off the screws and put it down. Check with the spirit level that the two lower marks are level, drill and plug them, then drive a screw into each, again leaving the heads standing out a few millimetres. Check: Leave a small gap behind the screw heads, as in step 3.
- Hang the cabinet and tighten the screws — All 4 screw heads now stand out from the wall. Hang the cabinet back on them and let it drop into place. Then reach inside and tighten the 4 screws until each head presses firmly against the back of the cabinet. Check: All 4 screws must be tight against the back. A gap behind a screw head means the cabinet is not held firmly.
- Refit the door — Hold the door tilted open in front of the cabinet and push its two bottom pins back into the clips. Then swing the door up and closed.
- Done! — Your TRONES is on the wall. Tilt the door open to put shoes in, and tilt it back up to close it. Repeat for the second cabinet in the pack.
TRONES shoe cabinet/storage: questions and answers
How long does it take to assemble the IKEA TRONES shoe cabinet/storage?
About 10–15 min for 1 person, working through the 8 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.
What tools do I need for the TRONES shoe cabinet/storage?
Flat-blade screwdriver, pencil, spirit level, wall screws and plugs (not included).
Can one person assemble the TRONES shoe cabinet/storage?
Yes, it is a one-person build.
Does the TRONES shoe cabinet/storage need to be fixed to the wall?
The manual shows a wall fixing: see step 3 (Drive the 2 upper wall screws) and step 5 (Drive the 2 lower wall screws). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.
What size is the TRONES shoe cabinet/storage once assembled?
52x18x39 cm, as given for this model. Leave extra floor space around it while you build.
Where can I download the IKEA TRONES shoe cabinet/storage assembly instructions PDF?
The official PDF is manual AA-53301-15, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 003.973.07 (white); other colours have their own numbers but usually the same manual.
Which IKEA manual is this guide based on?
The official manual AA-53301-15. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.
Related assembly guides
- IKEA BRUSALI shoe cabinet with 3 compartments assembly instructions
- IKEA BISSA shoe cabinet with 3 compartments assembly instructions
- IKEA BISSA shoe cabinet with 2 compartments assembly instructions
- IKEA TJUSIG shoe rack assembly instructions
- IKEA STÄLL shoe cabinet with 4 compartments assembly instructions
All hallway assembly guides · All furniture assembly guides
Stuck on a step? Common assembly problems and fixes · Furniture hardware explained