Step by StepAssembly Find your furniture

IKEA TJUSIG shoe rack assembly instructions

How to assemble the IKEA TJUSIG shoe rack, step by step: 13 animated steps built from the official manual, about 20–30 min for 1 person, with Phillips screwdriver, flat-blade screwdriver, Allen key (included).

IKEA TJUSIG shoe rack, assembled

Low black solid-wood shoe rack with two shelves of steel rods, bolted, dowelled and screwed together. Size: 79x32x37 cm. About 20–30 min, 1 person. Tools: Phillips screwdriver, Flat-blade screwdriver, Allen key (included).

Based on the official IKEA manual AA-1144848-2 (PDF). Guide updated .

TJUSIG shoe rack: quick facts
Steps13
Time20–30 min
People1
ToolsPhillips screwdriver, Flat-blade screwdriver, Allen key (included)
Size79x32x37 cm
Official manualAA-1144848-2
IKEA article number101.526.39 (black)
Pieces in the box46

In the box

PartPart numberQuantity
Post4
Crossbar4
Rod with threaded ends4
Plain rod6
Allen bolt1001028
Dowel1013488
Screw1095788
Connecting plate1018271
Screw1095352
Allen key1000011

Steps

  1. Lay out the two frames — Take the 4 rods with threaded inserts in their ends (the other 6 are plain). Lay out two frames on the floor, each 2 rods between 2 posts. Turn every post so the end with the longer gap past its hole pairs points the same way (these are the legs), then push the posts onto the rod ends. Check: The hole pairs are not centred on a post: check that all 4 posts have their long end the same way.
  2. Bolt the frames together — Screw an allen bolt (100102) through each post into the end of each rod, 4 per frame, and tighten them with the allen key (100001). Then set the second frame aside until step 9.
  3. Crossbars onto the first post — Push a dowel (101348) into both ends of two crossbars (4 dowels). Stand the crossbars up on the left post of the frame, with their dowels in the holes facing up.
  4. Screw the crossbars to the post — Drive a screw (109578) through the angled hole near the bottom of each crossbar into the post, with a Phillips screwdriver.
  5. Turn it on its side, first 3 rods in — Turn the frame up onto the post with the crossbars, so the rods stand upright and the crossbars lie on the floor. Push 3 plain rods into the 3 holes of the crossbar further from the legs.
  6. Third crossbar on top — Push a dowel (101348) into both ends of a third crossbar. Press it down onto the tops of the 3 rods and push its end dowel into the hole in the upper post.
  7. Second shelf: 3 rods and the last crossbar — Push the last 3 plain rods into the other crossbar on the floor. Put a dowel (101348) in both ends of the last crossbar, then press it onto the rods and into the upper post.
  8. Screw the top crossbars to the post — Fix both crossbars you just fitted to the upper post: one screw (109578) through the angled hole in each.
  9. Turn it back down, second frame on top — Lay the rack back down flat on the first frame. Lower the second frame onto the dowels in the free ends of the 4 crossbars, with its legs the same way as the first frame.
  10. Screw the second frame on — Drive the last 4 screws (109578) through the angled holes at the top ends of the crossbars into the second frame.
  11. Stand it up — Stand the shoe rack up on its four legs.
  12. Info: stacking two racks — Only if you stack two TJUSIG racks: set the second rack on top and join the posts at the seam with the connecting plate (101827) and 2 screws (109535), one into each post. Each rack comes with one plate.
  13. Done! — Your TJUSIG shoe rack is assembled. Shoes go on the two rod shelves.

TJUSIG shoe rack: questions and answers

How long does it take to assemble the IKEA TJUSIG shoe rack?

About 20–30 min for 1 person, working through the 13 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the TJUSIG shoe rack?

Phillips screwdriver, flat-blade screwdriver, Allen key (included). Already in the box: Allen key.

Can one person assemble the TJUSIG shoe rack?

Yes, it is a one-person build.

What size is the TJUSIG shoe rack once assembled?

79x32x37 cm, as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the TJUSIG shoe rack?

27 fittings of 5 kinds, the most numerous being 8 × allen bolt, 8 × dowel, 8 × screw. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA TJUSIG shoe rack assembly instructions PDF?

The official PDF is manual AA-1144848-2, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 101.526.39 (black); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-1144848-2. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example allen bolt 100102). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All IKEA TJUSIG assembly guides · All hallway assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained