Beds assembly instructions
Bed frames and day-beds. Long side rails, slat supports and centre beams. Often a two-person job.
- IKEA MALM bed frame (high, Queen) assembly instructions — 16 steps, about 1½–2 h. The high MALM Queen bed frame in dark-brown veneer: cam-lock frame, bolted two-part headboard, telescopic centre beam and the LURÖY roll-out slatted base.
- IKEA HEMNES day-bed frame with 3 drawers assembly instructions — 46 steps, about 4–5 hours. White day bed with a frame-and-panel back and ends, a pull-out slatted base on castors that turns it into a double bed, and 3 big drawers on runners.
- IKEA TUFFING bunk bed frame assembly instructions — 37 steps, about 1.5–2 h. Low dark grey steel-tube bunk bed with a fabric guard round the top bunk, a fabric end panel below, mesh slatted bases and a hook-on ladder.
- IKEA BRIMNES day-bed frame with 2 drawers assembly instructions — 54 steps, about 3–4 hours. White day bed with framed end panels and a back, a slatted pull-out base on castors that turns it into a double bed, and 2 big drawers on runners in the base.
- IKEA MYDAL bunk bed frame assembly instructions — 35 steps, about 2–3 h. Solid pine bunk bed with two slatted bases, guard rails round the top bunk and a fixed ladder at either end.
- IKEA SMÅSTAD loft bed frame w desk and storage assembly instructions — 40 steps, about 3–4 h. White loft bed on a two-part end panel and a storage unit with open shelves, with a ladder at the storage end and room for a desk underneath.
- IKEA TUFFING loft bed frame assembly instructions — 40 steps, about 2–3 h. Dark grey steel-tube loft bed with a fabric guard all round, a mesh slatted base and a leaning ladder that hooks onto the front rail.
- IKEA VITVAL loft bed frame assembly instructions — 45 steps, about 3–4 h. White steel loft bed with light grey fabric guards all round, a roll-out slatted base and a leaning ladder at one end of the long side.
- IKEA VITVAL bunk bed frame assembly instructions — 46 steps, about 3–4 h. White steel bunk bed with light grey fabric guards, two roll-out slatted bases and a straight ladder near one end of the long side.
- IKEA SNIGLAR cot assembly instructions — 14 steps, about 30–45 min. Solid beech cot for a 60x120 cm mattress: two barred end panels with legs, two barred sides and a base that sits at two heights.
- IKEA SUNDVIK cot assembly instructions — 30 steps, about 45–60 min. White cot for a 70x140 cm mattress: two end panels with legs, two barred sides and a base at two heights; one side swaps for a low rail to make a junior bed.
Assembling beds: the numbers
Counted from the 11 guides in Beds, each built from its official manual.
| Guides | 11 |
|---|---|
| Steps | 14 to 54 (typically 40) |
| Time | about 30–45 min (SNIGLAR cot) to about 4–5 hours (HEMNES day-bed frame with 3 drawers) |
| Fittings per build | 24 to 306 (typically 122) |
| Planned for two people | 9 of 11 |
| Wall fixing in the manual | 2 of 11 |
| Most common tools | Phillips screwdriver (8), Hammer (6), Flat-blade screwdriver (6), Allen key (3) |
| Allen key supplied | 11 of 11 |
Fittings in beds boxes
The kinds of fitting these manuals use most. What each one does: furniture hardware explained.
| Fitting | Guides | Total |
|---|---|---|
| Bolts and Allen screws | 11 of 11 | 224 |
| Screws | 9 of 11 | 469 |
| Nuts and washers | 8 of 11 | 129 |
| Pins and plugs | 8 of 11 | 79 |
| Wooden dowels | 7 of 11 | 188 |
| Cam screws and connectors | 6 of 11 | 152 |
What the beds manuals warn about
Notes from the official manuals, at the step where they apply.
- Use the screws 110789 here, not the 105163. (MALM bed frame (high, Queen), step 9)
- Use the short screws 100347 for the runners, not 116894. (HEMNES day-bed frame with 3 drawers, step 2)
- Use the short bolt 117444 here, not a connector. Line the ends of the fabric up with the ends of the rails. (TUFFING bunk bed frame, step 13)
- Use the screws 105307 here, not 102138 or 100372. (BRIMNES day-bed frame with 2 drawers, step 3)
- Build two end frames the same way (steps 1–6). Use the long bolts 120209 for the end frames. The holes for the barrel nuts face up. (MYDAL bunk bed frame, step 1)
- Use the dowels 101358 here, not the slightly different 101352. (SMÅSTAD loft bed frame w desk and storage, step 2)
Beds by IKEA range
Ranges with more than one guide: each page compares the models and the fittings they share.
Beds: questions and answers
How long does it take to assemble beds?
In these 11 guides, from about 30–45 min for the SNIGLAR cot to about 4–5 hours for the HEMNES day-bed frame with 3 drawers. Each guide gives its own estimate for the planned number of people.
Can one person assemble beds?
2 of the 11 beds guides here are one-person builds; 9 are planned for two people, usually for the steps where a large part is lifted, turned or stood up.
What tools do I need for beds?
Most often Phillips screwdriver (8 of 11), hammer (6 of 11), flat-blade screwdriver (6 of 11) and Allen key (3 of 11, supplied). Each guide lists exactly what it needs.
Do beds need to be fixed to the wall?
2 of the 11 manuals include a wall fixing. Furniture that can tip over must be fixed as its manual shows; use screws and plugs that suit your wall.