IKEA MALM assembly instructions
4 animated assembly guides for the IKEA MALM range: MALM chest of 3 drawers, MALM bed frame (high, Queen), MALM dressing table and MALM chest of 2 drawers. They run from 16 to 41 steps and take from about 1–1.5 hours (MALM chest of 2 drawers) to about 2–3 hours (MALM chest of 3 drawers); 3 of 4 are planned for two people.
Every MALM guide
Each one is rebuilt step by step from its official IKEA manual, with the same parts, counts and order.
- IKEA MALM chest of 3 drawers assembly instructions — 41 steps, about 2–3 hours, 2 people. The classic MALM dresser: a cam-lock frame on a plinth, a nailed-on back panel, wall anchoring and three drawers on runners.
- IKEA MALM bed frame (high, Queen) assembly instructions — 16 steps, about 1½–2 h, 2 people. The high MALM Queen bed frame in dark-brown veneer: cam-lock frame, bolted two-part headboard, telescopic centre beam and the LURÖY roll-out slatted base.
- IKEA MALM dressing table assembly instructions — 26 steps, about 1–2 hours, 2 people. A high-gloss MALM dressing table: thick leg panels bolted to the top, a loose glass plate held by clips, wall anchoring and one wide drawer on concealed runners.
- IKEA MALM chest of 2 drawers assembly instructions — 23 steps, about 1–1.5 hours, 1 person. The small MALM bedside chest: a cam-lock frame built on its side, a nailed-on back panel and two drawers on wheeled runners.
Compare the MALM models
Size, steps, time, people and tools for each model, from its manual.
| Model | Size | Steps | Time | People | Tools | Manual |
|---|---|---|---|---|---|---|
| MALM chest of 3 drawers | 80×48×78 cm | 41 | 2–3 hours | 2 | Flat & Phillips screwdriver, Hammer, Pencil, Drill (for the wall fixing) | AA-2586928-1 |
| MALM bed frame (high, Queen) | 168×211 cm, headboard 100 cm (66 1/8×83 1/8", 39 3/8" high) | 16 | 1½–2 h | 2 | Phillips screwdriver, Hammer, Allen key (included), Wrench (included) | AA-2558683-1 |
| MALM dressing table | 120×41×78 cm | 26 | 1–2 hours | 2 | Flat & Phillips screwdriver, Hammer, Pencil, Drill (for the wall fixing) | AA-2601226-4 |
| MALM chest of 2 drawers | 40×48×55 cm | 23 | 1–1.5 hours | 1 | Flat & Phillips screwdriver, Hammer | AA-2596665-2 |
Fittings shared across MALM
These part numbers appear in more than one MALM manual. The same number means the same fitting, so if one is missing, a spare with that number from another MALM box fits, and IKEA customer service can send one by number.
| Fitting | Part number | Used in | Total in these guides |
|---|---|---|---|
| Wooden dowel | 101345 | 3 of 4: MALM chest of 3 drawers, MALM dressing table, MALM chest of 2 drawers | 52 |
| Cam screw | 118331 | 3 of 4: MALM chest of 3 drawers, MALM dressing table, MALM chest of 2 drawers | 48 |
| Expansion dowel | 110519 | 3 of 4: MALM chest of 3 drawers, MALM dressing table, MALM chest of 2 drawers | 24 |
| Glide | 153548 | 3 of 4: MALM chest of 3 drawers, MALM dressing table, MALM chest of 2 drawers | 14 |
| Nail | 101221 | 2 of 4: MALM chest of 3 drawers, MALM chest of 2 drawers | 60 |
| Cam lock | 120076 | 2 of 4: MALM chest of 3 drawers, MALM chest of 2 drawers | 46 |
| Screw | 100365 | 2 of 4: MALM chest of 3 drawers, MALM chest of 2 drawers | 30 |
| Screw | 115339 | 2 of 4: MALM chest of 3 drawers, MALM chest of 2 drawers | 10 |
| Screw | 105344 | 2 of 4: MALM chest of 3 drawers, MALM dressing table | 8 |
| Washer | 100823 | 2 of 4: MALM chest of 3 drawers, MALM dressing table | 8 |
| Hanger bolt | 114334 | 2 of 4: MALM bed frame (high, Queen), MALM dressing table | 8 |
| Wedge | 122998 | 2 of 4: MALM bed frame (high, Queen), MALM dressing table | 8 |
What the MALM manuals warn about
Notes from the official manuals, at the step where they apply: check these before you get there.
- Check the board’s orientation: the round cam lock holes face the top end of the chest and sit at the back edge, as the manual’s right/wrong drawing shows. (MALM chest of 3 drawers, step 8)
- Use the screws 110789 here, not the 105163. (MALM bed frame (high, Queen), step 9)
- Use the large dowels 101353 here, not the small 101345 (those are for the drawer). (MALM dressing table, step 3)
- The top’s plain edge goes to the front; the groove underneath goes to the back, as the manual’s right/wrong close-up shows. (MALM chest of 2 drawers, step 8)
- Check for hidden pipes and cables before you drill. (MALM chest of 3 drawers, step 23)
- The side rails must be straight before you lock the braces. (MALM bed frame (high, Queen), step 12)
- Keep the panel pushed into the groove and square with the side while you nail. (MALM chest of 2 drawers, step 10)
- The plinth must be flush with the panel’s front and bottom edges, not sticking out past them. (MALM chest of 3 drawers, step 5)
- Hold the beam at the middle while extending it, to avoid pinching your fingers. (MALM bed frame (high, Queen), step 13)
- Turn each bolt in until its collar sits on the surface, as the manual’s detail shows. (MALM dressing table, step 1)
Fixing MALM to the wall
2 of 4 MALM manuals include a wall fixing. Use screws and plugs made for your wall, and check for pipes and cables before you drill.
- MALM chest of 3 drawers: wall fixing at step 16
- MALM dressing table: wall fixing at step 6
MALM: questions and answers
How long does it take to assemble IKEA MALM furniture?
It depends on the model: the MALM chest of 3 drawers takes about 2–3 hours, the MALM bed frame (high, Queen) takes about 1½–2 h, the MALM dressing table takes about 1–2 hours and the MALM chest of 2 drawers takes about 1–1.5 hours. Times are for the planned number of people, working through the guide.
What tools do I need for IKEA MALM?
Needed for every MALM model here: hammer. Across the range the manuals call for hammer (4 of 4), flat & Phillips screwdriver (3 of 4), pencil (2 of 4), drill (for the wall fixing) (2 of 4), Phillips screwdriver (1 of 4), Allen key (1 of 4, supplied) and wrench (1 of 4, supplied).
Can one person assemble IKEA MALM?
MALM chest of 2 drawers is a one-person build; MALM chest of 3 drawers, MALM bed frame (high, Queen) and MALM dressing table are planned for two people.
Do MALM models use the same screws and fittings?
Partly. 12 part numbers appear in more than one MALM manual here, for example wooden dowel 101345 (in 3 of 4), cam screw 118331 (in 3 of 4) and expansion dowel 110519 (in 3 of 4). Other fittings are specific to one model, so always check the part number on the bag.
Which IKEA manuals are these MALM guides based on?
MALM chest of 3 drawers: AA-2586928-1; MALM bed frame (high, Queen): AA-2558683-1; MALM dressing table: AA-2601226-4; MALM chest of 2 drawers: AA-2596665-2. Compare the code with the one printed on your paper manual; if it differs, follow your manual.