Step by StepAssembly Find your furniture

IKEA SNIGLAR assembly instructions

2 animated assembly guides for the IKEA SNIGLAR range: SNIGLAR changing table and SNIGLAR cot. They run from 10 to 14 steps and take about 30–45 min each; each is a one-person build.

Every SNIGLAR guide

Each one is rebuilt step by step from its official IKEA manual, with the same parts, counts and order.

Compare the SNIGLAR models

Size, steps, time, people and tools for each model, from its manual.

ModelSizeStepsTimePeopleToolsManual
SNIGLAR changing table53x72x87 cm1030–45 min1Flat-blade screwdriver, Allen key (included)AA-67753-12
SNIGLAR cot60x120 cm1430–45 min1Flat-blade screwdriver, Allen key (included)AA-719994-5

What the SNIGLAR manuals warn about

Notes from the official manuals, at the step where they apply: check these before you get there.

  • Check the groove in the end rail before you press it on: it has to take the edge of the panel. (SNIGLAR changing table, step 4)
  • Each corner block must sit flush with the side of the base, as in the right-hand close-up, not turned out. (SNIGLAR cot, step 3)
  • Keep the end panel the way round the drawing shows: the small holes in its posts (marked by the hand) take the base pins later. (SNIGLAR cot, step 1)

SNIGLAR: questions and answers

How long does it take to assemble IKEA SNIGLAR furniture?

Each of them takes about 30–45 min. Times are for the planned number of people, working through the guide.

What tools do I need for IKEA SNIGLAR?

Every SNIGLAR model here needs the same: flat-blade screwdriver and Allen key (supplied in the box).

Can one person assemble IKEA SNIGLAR?

Yes: every SNIGLAR model here is a one-person build.

Which IKEA manuals are these SNIGLAR guides based on?

SNIGLAR changing table: AA-67753-12; SNIGLAR cot: AA-719994-5. Compare the code with the one printed on your paper manual; if it differs, follow your manual.

More to browse

All furniture assembly guides