Kids assembly instructions
Animated, step-by-step assembly instructions for kids.
- IKEA MAMMUT children's table assembly instructions — 6 steps, about 10 min. A sturdy moulded-plastic children's table for indoors or out: four legs screw into the top by hand, no tools needed.
- IKEA FLISAT children's table assembly instructions — 8 steps, about 15 min. A solid pine children's table with two lift-off lids in the top: a crossbar, four screw-in legs and the lids, done in a few minutes.
- IKEA SNIGLAR changing table assembly instructions — 10 steps, about 30–45 min. Beech changing table with a white-floored top tray and lower shelf, dowelled and bolted to four legs.
- IKEA GULLIVER changing table assembly instructions — 17 steps, about 45–60 min. White changing table with slatted ends, a rimmed changing top and two open shelves, dowelled and screwed together.
- IKEA RESÖ children's picnic table assembly instructions — 10 steps, about 30 min. Solid wood picnic table for children with two fixed benches: two A-shaped end frames bolt to the slatted top, then the benches screw onto the frames.
- IKEA UTTER children's table assembly instructions — 3 steps, about 5 min. A light moulded-plastic table for children, for indoors or out: four legs screw into the corners of the top by hand, no tools or screws.
Assembling kids: the numbers
Counted from the 6 guides in Kids, each built from its official manual.
| Guides | 6 |
|---|---|
| Steps | 3 to 17 (typically 9) |
| Time | about 5 min (UTTER children's table) to about 45–60 min (GULLIVER changing table) |
| Fittings per build | 0 to 61 (typically 19) |
| Planned for two people | 0 of 6 |
| Wall fixing in the manual | 0 of 6 |
| Most common tools | Allen key (2), Phillips screwdriver (1), Flat-blade screwdriver (1), Allen key with handle 121030 (1) |
| No tools needed | 2 of 6 |
| Allen key supplied | 3 of 6 |
Fittings in kids boxes
The kinds of fitting these manuals use most. What each one does: furniture hardware explained.
| Fitting | Guides | Total |
|---|---|---|
| Screws | 4 of 6 | 44 |
| Wooden dowels | 3 of 6 | 86 |
| Bolts and Allen screws | 2 of 6 | 20 |
| Knobs and handles | 1 of 6 | 1 |
What the kids manuals warn about
Notes from the official manuals, at the step where they apply.
- Stop when the collar rests on the leg: the other half of the screw must stick out. (MAMMUT children's table, step 1)
- Stop when the screw head is flush with the wood: do not overtighten. (FLISAT children's table, step 4)
- Check the groove in the end rail before you press it on: it has to take the edge of the panel. (SNIGLAR changing table, step 4)
- Use the thick 101350 dowels here, not the thin 101375. (GULLIVER changing table, step 5)
- Holes with the metal insert must face down, away from the legs. Leave the bolts slightly loose for now. (RESÖ children's picnic table, step 1)
- Screw each leg in straight and hand-tight only. Do not force it if the thread catches: back it off and start again. (UTTER children's table, step 1)
Kids by IKEA range
Ranges with more than one guide: each page compares the models and the fittings they share.
Kids: questions and answers
How long does it take to assemble kids?
In these 6 guides, from about 5 min for the UTTER children's table to about 45–60 min for the GULLIVER changing table. Each guide gives its own estimate for the planned number of people.
Can one person assemble kids?
Yes: all 6 kids guides here are one-person builds.
What tools do I need for kids?
Most often Allen key (2 of 6, supplied), Phillips screwdriver (1 of 6), flat-blade screwdriver (1 of 6) and Allen key with handle 121030 (1 of 6, supplied). 2 need no tools. Each guide lists exactly what it needs.