Step by StepAssembly Find your furniture

IKEA SNIGLAR changing table assembly instructions

How to assemble the IKEA SNIGLAR changing table, step by step: 10 animated steps built from the official manual, about 30–45 min for 1 person, with flat-blade screwdriver, Allen key (included).

IKEA SNIGLAR changing table, assembled

Beech changing table with a white-floored top tray and lower shelf, dowelled and bolted to four legs. Size: 53x72x87 cm. About 30–45 min, 1 person. Tools: Flat-blade screwdriver, Allen key (included).

Based on the official IKEA manual AA-67753-12 (PDF). Guide updated .

SNIGLAR changing table: quick facts
Steps10
Time30–45 min
People1
ToolsFlat-blade screwdriver, Allen key (included)
Size53x72x87 cm
Official manualAA-67753-12
IKEA article number200.452.05 (beech white)
Pieces in the box63

In the box

PartPart numberQuantity
Leg4
Long tray rail (grooved)4
Short tray end rail4
White tray panel2
Bolt1052378
Cross dowel1211218
Dowel10135016
Dowel10134316
Allen key1000011

Steps

  1. Dowels into the long rails — Steps 1–4 build one tray; do them twice (top tray and lower shelf). Lay two long grooved rails on a soft surface and push two dowels (101350) into each end, 8 per tray.
  2. Rails onto an end rail — Lay a short end rail on the floor with its holes facing up. Stand the two long rails up and press their dowels down into its holes, grooves facing each other.
  3. Slide in the panel — Slide the white panel down from the top into the grooves of the two long rails until it sits in the groove of the end rail at the bottom.
  4. Close the tray — Press the second end rail down onto the dowels at the top of the long rails. Its groove must face down, over the edge of the panel. Check: Check the groove in the end rail before you press it on: it has to take the edge of the panel.
  5. Two legs onto the trays — Stand both trays on a long edge, undersides facing you, the top tray at the leg tops. Push two dowels (101343) into each end rail end facing up, then lay two legs across both trays onto them.
  6. Bolt the legs on, then turn over — Push a cross dowel (121121) into the hole in the underside of each end rail and turn its slot with a flat screwdriver so its hole lines up. Screw a bolt (105237) through the leg into it with the allen key, 4 in all. Then turn the table over.
  7. The other two legs — On this side too, push two dowels (101343) into each end rail end facing up, 8 in all, then lay the last two legs across both trays onto them.
  8. Bolt the last legs on — Fix the last two legs the same way: a cross dowel (121121) into each end rail underside, lined up with the screwdriver, and a bolt (105237) through the leg into it, tightened with the allen key.
  9. Stand it up — Stand the changing table up on its four legs.
  10. Done! — Your SNIGLAR changing table is assembled. The top tray holds a changing pad; the lower shelf is for nappies and towels.

SNIGLAR changing table: questions and answers

How long does it take to assemble the IKEA SNIGLAR changing table?

About 30–45 min for 1 person, working through the 10 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the SNIGLAR changing table?

Flat-blade screwdriver, Allen key (included). Already in the box: Allen key.

Can one person assemble the SNIGLAR changing table?

Yes, it is a one-person build.

What size is the SNIGLAR changing table once assembled?

53x72x87 cm, as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the SNIGLAR changing table?

48 fittings of 4 kinds, the most numerous being 16 × dowel, 16 × dowel, 8 × bolt. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA SNIGLAR changing table assembly instructions PDF?

The official PDF is manual AA-67753-12, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 200.452.05 (beech white); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-67753-12. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example bolt 105237). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All IKEA SNIGLAR assembly guides · All kids assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained