IKEA TROTTEN assembly instructions
3 animated assembly guides for the IKEA TROTTEN range: TROTTEN cabinet with sliding doors, TROTTEN drawer unit w 3 drawers on castors and TROTTEN cabinet with doors. They run from 20 to 24 steps and take about 1–1.5 hours each; each is a one-person build.
Every TROTTEN guide
Each one is rebuilt step by step from its official IKEA manual, with the same parts, counts and order.
- IKEA TROTTEN cabinet with sliding doors assembly instructions — 20 steps, about 1–1.5 hours, 1 person. A white steel office cabinet: two leg frames bolted to the bottom panel, side and back panels that slide down into place, a hooked-on top, four shelves on clips and two lockable sliding doors.
- IKEA TROTTEN drawer unit w 3 drawers on castors assembly instructions — 23 steps, about 1–1.5 hours, 1 person. A white steel drawer unit on castors: runners screwed to the side panels, two bottom rails that click in, a slide-in back, a hooked-on top, four castors and three drawers, the middle one with a lock.
- IKEA TROTTEN cabinet with doors assembly instructions — 24 steps, about 1–1.5 hours, 1 person. A steel office cabinet: two leg frames, side and back panels that slide into place, an open top section bolted together upside down, a middle panel, bottom, shelf and two lockable hinged doors on pins.
Compare the TROTTEN models
Size, steps, time, people and tools for each model, from its manual.
| Model | Size | Steps | Time | People | Tools | Manual |
|---|---|---|---|---|---|---|
| TROTTEN cabinet with sliding doors | 80x55x110 cm | 20 | 1–1.5 hours | 1 | Phillips screwdriver, Flat screwdriver, Allen key (included), Spirit level | AA-2241620-2 |
| TROTTEN drawer unit w 3 drawers on castors | 40x47x56 cm | 23 | 1–1.5 hours | 1 | Phillips screwdriver, Flat screwdriver, Spanner (included) | AA-2241545-6 |
| TROTTEN cabinet with doors | 70x35x110 cm | 24 | 1–1.5 hours | 1 | Phillips screwdriver, Flat screwdriver, Allen key (included), Spirit level, Wall screws (not included) | AA-2241595-6 |
Fittings shared across TROTTEN
These part numbers appear in more than one TROTTEN manual. The same number means the same fitting, so if one is missing, a spare with that number from another TROTTEN box fits, and IKEA customer service can send one by number.
| Fitting | Part number | Used in | Total in these guides |
|---|---|---|---|
| Screw | 106917 | 2 of 3: TROTTEN cabinet with sliding doors, TROTTEN drawer unit w 3 drawers on castors | 14 |
| Screw | 100404 | 2 of 3: TROTTEN cabinet with sliding doors, TROTTEN cabinet with doors | 10 |
| Levelling foot | 10036516 | 2 of 3: TROTTEN cabinet with sliding doors, TROTTEN cabinet with doors | 8 |
What the TROTTEN manuals warn about
Notes from the official manuals, at the step where they apply: check these before you get there.
- Against a wall you may turn the smooth side inwards instead (manual page 6, right). (TROTTEN cabinet with sliding doors, step 5)
- Use the short countersunk screws 112581 here, not 116654 or 106917. (TROTTEN drawer unit w 3 drawers on castors, step 2)
- Check all 4 posts are fully down in the side panels before you go on. (TROTTEN cabinet with doors, step 10)
- The door without the lock goes in the rear track first. (TROTTEN cabinet with sliding doors, step 13)
- Build all 3 drawers the same way (steps 10-15). (TROTTEN drawer unit w 3 drawers on castors, step 13)
- Push the leg ends in all the way: the brackets must sit flat against the panel. (TROTTEN cabinet with doors, step 2)
- Leave the 2 tabs at the top of the side flanges straight for now. They are bent in step 13. (TROTTEN cabinet with doors, step 7)
- Fix the cabinet to the wall to stop it tipping over. (TROTTEN cabinet with doors, step 22)
Fixing TROTTEN to the wall
1 of 3 TROTTEN manuals include a wall fixing, and they say the wall screws and plugs are not included. Use screws and plugs made for your wall, and check for pipes and cables before you drill.
- TROTTEN cabinet with doors: wall fixing at step 23
TROTTEN: questions and answers
How long does it take to assemble IKEA TROTTEN furniture?
Each of them takes about 1–1.5 hours. Times are for the planned number of people, working through the guide.
What tools do I need for IKEA TROTTEN?
Needed for every TROTTEN model here: Phillips screwdriver and flat screwdriver. Across the range the manuals call for Phillips screwdriver (3 of 3), flat screwdriver (3 of 3), Allen key (2 of 3, supplied), spirit level (2 of 3), spanner (1 of 3, supplied) and wall screws (not included) (1 of 3).
Can one person assemble IKEA TROTTEN?
Yes: every TROTTEN model here is a one-person build.
Do TROTTEN models use the same screws and fittings?
Partly. 3 part numbers appear in more than one TROTTEN manual here, for example screw 106917 (in 2 of 3), screw 100404 (in 2 of 3) and levelling foot 10036516 (in 2 of 3). Other fittings are specific to one model, so always check the part number on the bag.
Which IKEA manuals are these TROTTEN guides based on?
TROTTEN cabinet with sliding doors: AA-2241620-2; TROTTEN drawer unit w 3 drawers on castors: AA-2241545-6; TROTTEN cabinet with doors: AA-2241595-6. Compare the code with the one printed on your paper manual; if it differs, follow your manual.