IKEA IDANÄS assembly instructions
4 animated assembly guides for the IKEA IDANÄS range (often typed “idanas”): IDANÄS wardrobe, IDANÄS cabinet with bi-folding doors, IDANÄS bedside table and IDANÄS side table. They run from 16 to 50 steps and take from about 45–60 minutes (IDANÄS side table) to about 3–4 h (IDANÄS wardrobe); 2 of 4 are planned for two people.
Every IDANÄS guide
Each one is rebuilt step by step from its official IKEA manual, with the same parts, counts and order.
- IKEA IDANÄS wardrobe assembly instructions — 50 steps, about 3–4 h, 2 people. A tall white wardrobe on legs with two folding doors, a clothes rod and shelves: the carcass clicks together lying down, the back panels slide in, it stands on a separate leg frame and is fixed to the wall before the bi-fold doors are hung.
- IKEA IDANÄS cabinet with bi-folding doors assembly instructions — 47 steps, about 2–3 h, 2 people. A white cabinet on legs with two folding doors and four shelves: the carcass clicks together lying down, the back panels slide in upside down, it stands on a separate leg frame and is fixed to the wall before the bi-fold doors are hung.
- IKEA IDANÄS bedside table assembly instructions — 33 steps, about 1.5–2 hours, 1 person. A white bedside table on a separate leg frame with an open shelf and a drawer: the cam-lock carcass is built lying down, the moulded top hooks on, it is finished upside down and the drawer runs on full-extension runners.
- IKEA IDANÄS side table assembly instructions — 16 steps, about 45–60 minutes, 1 person. White side table with tapered legs, a middle shelf and a bottom shelf, built on its side from two ready-made side frames with cam locks, then finished upright.
Compare the IDANÄS models
Size, steps, time, people and tools for each model, from its manual.
| Model | Size | Steps | Time | People | Tools | Manual |
|---|---|---|---|---|---|---|
| IDANÄS wardrobe | 121×59×211 cm | 50 | 3–4 h | 2 | Phillips screwdriver, Hammer, Pencil, Drill, Step ladder, Allen keys (included), Spanner (included) | AA-2215726-10 |
| IDANÄS cabinet with bi-folding doors | 121×50×135 cm | 47 | 2–3 h | 2 | Phillips screwdriver, Hammer, Pencil, Drill, Spirit level, Allen key (included) | AA-2215723-14 |
| IDANÄS bedside table | 47×40×68 cm | 33 | 1.5–2 hours | 1 | Phillips screwdriver, Flat-blade screwdriver | AA-2223931-5 |
| IDANÄS side table | 46×36 cm | 16 | 45–60 minutes | 1 | Phillips screwdriver, Flat-blade screwdriver, Allen key (included) | AA-2350133-1 |
Fittings shared across IDANÄS
These part numbers appear in more than one IDANÄS manual. The same number means the same fitting, so if one is missing, a spare with that number from another IDANÄS box fits, and IKEA customer service can send one by number.
What the IDANÄS manuals warn about
Notes from the official manuals, at the step where they apply: check these before you get there.
- Check the groove direction before you fit the rail: it will hold the door track. (IDANÄS wardrobe, step 4)
- Check the screw: 100214 here, not the shorter 100217 or the long 10093458. (IDANÄS cabinet with bi-folding doors, step 3)
- Check the holes on both rails before you press them down. (IDANÄS bedside table, step 4)
- Use cam locks 106720 here, not 119253. (IDANÄS side table, step 4)
- Check the strips are the right way round: the lip covers the gap between the leaves. (IDANÄS wardrobe, step 42)
- The top must be pushed all the way home on both sides before you go on. (IDANÄS bedside table, step 8)
- Use cam locks 119253 here, not 106720. (IDANÄS side table, step 6)
- Two people needed. Check there is room under the ceiling before raising it. (IDANÄS wardrobe, step 28)
- Turn it over carefully; do not let it fall onto the legs. (IDANÄS bedside table, step 17)
- Long end into the hole, collar against the rail, short end sticking out. (IDANÄS side table, step 9)
Fixing IDANÄS to the wall
2 of 4 IDANÄS manuals include a wall fixing. Use screws and plugs made for your wall, and check for pipes and cables before you drill.
- IDANÄS wardrobe: wall fixing at step 28
- IDANÄS cabinet with bi-folding doors: wall fixing at step 21
IDANÄS: questions and answers
How long does it take to assemble IKEA IDANÄS furniture?
It depends on the model: the IDANÄS wardrobe takes about 3–4 h, the IDANÄS cabinet with bi-folding doors takes about 2–3 h, the IDANÄS bedside table takes about 1.5–2 hours and the IDANÄS side table takes about 45–60 minutes. Times are for the planned number of people, working through the guide.
What tools do I need for IKEA IDANÄS?
Needed for every IDANÄS model here: Phillips screwdriver. Across the range the manuals call for Phillips screwdriver (4 of 4), hammer (2 of 4), pencil (2 of 4), drill (2 of 4), Allen key (2 of 4, supplied), flat-blade screwdriver (2 of 4), step ladder (1 of 4), Allen keys (1 of 4, supplied), spanner (1 of 4, supplied) and spirit level (1 of 4).
Can one person assemble IKEA IDANÄS?
IDANÄS bedside table and IDANÄS side table are one-person builds; IDANÄS wardrobe and IDANÄS cabinet with bi-folding doors are planned for two people.
Do IDANÄS models use the same screws and fittings?
Partly. 12 part numbers appear in more than one IDANÄS manual here, for example shelf pin 131372 (in 3 of 4), clip 10093081 (in 3 of 4) and wedge 10093082 (in 3 of 4). Other fittings are specific to one model, so always check the part number on the bag.
Which IKEA manuals are these IDANÄS guides based on?
IDANÄS wardrobe: AA-2215726-10; IDANÄS cabinet with bi-folding doors: AA-2215723-14; IDANÄS bedside table: AA-2223931-5; IDANÄS side table: AA-2350133-1. Compare the code with the one printed on your paper manual; if it differs, follow your manual.