IKEA GURSKEN chest of 3 drawers assembly instructions
How to assemble the IKEA GURSKEN chest of 3 drawers (dresser), step by step: 31 animated steps built from the official manual, about 1.5–2.5 hours for 1 person, with Phillips screwdriver, flat-blade screwdriver, hammer, pencil, drill (for the wall fixing).
A light beige GURSKEN chest: a screwed frame built lying on its front, a nailed-on back, wall anchoring and three knob drawers that slide on plastic runners. Size: 69x38x67 cm. About 1.5–2.5 hours, 1 person. Tools: Phillips screwdriver, Flat-blade screwdriver, Hammer, Pencil, Drill (for the wall fixing).
Based on the official IKEA manual AA-2230354-6 (PDF). Guide updated .
| Steps | 31 |
|---|---|
| Time | 1.5–2.5 hours |
| People | 1 |
| Tools | Phillips screwdriver, Flat-blade screwdriver, Hammer, Pencil, Drill (for the wall fixing) |
| Size | 69x38x67 cm |
| Official manual | AA-2230354-6 |
| IKEA article number | 004.863.27 (light beige) |
| Pieces in the box | 128 |
In the box
| Part | Part number | Quantity |
|---|---|---|
| Side panel | 2 | |
| Top | 1 | |
| Plinth (front rail) | 1 | |
| Back rail | 1 | |
| Back panel (folding fibreboard) | 1 | |
| Drawer front | 3 | |
| Drawer side | 6 | |
| Drawer back | 3 | |
| Drawer bottom | 3 | |
| Runner | 149842 | 6 |
| Screw | 123502 | 12 |
| Screw | 100232 | 8 |
| Wooden dowel | 101345 | 14 |
| Cam screw | 123492 | 12 |
| Cam lock | 103114 | 12 |
| Expansion dowel | 110519 | 12 |
| Knob | 10058243 | 3 |
| Screw | 108443 | 3 |
| Stop screw | 102323 | 6 |
| Felt pad | 107849 | 4 |
| Nails 101221 (bag) | 1 | |
| Nail holder | 105493 | 1 |
| Allen key | 100006 | 1 |
| Wall bracket | 106989 | 2 |
| Screw | 109049 | 2 |
| Washer | 100823 | 4 |
| Wall screw | 109048 | 2 |
| Wall plug | 121714 | 2 |
Steps
- Runners on the side panels — Lay both side panels on a rug, inside face up. Screw 3 plastic runners onto each panel, 2 small screws 123502 per runner, with a Phillips screwdriver. Check: Use the short screws 123502 here, not the longer 108443 (they are for the knobs).
- Dowels into the top — Lay the top on the rug, inside face up, and push 2 wooden dowels into each end.
- Wall brackets on the top — Put the 2 wall brackets on the top at its back edge, upright leg sticking up over the edge. Fix each with a screw 109049 and a washer 100823.
- Top onto the first side panel — Stand the first side panel on its front edge, runners inside. Stand the top on its front edge too and push its dowels into the side panel. Fix it with 2 screws 100232 and the Allen key. Check: Do not overtighten: the screw head should be flush, not sunk into the panel.
- Dowels into the two rails — Lay the back rail and the plinth rail flat and push a wooden dowel into each end of both.
- Back rail onto the side panel — Push the back rail onto the side panel at the bottom, at the back edge (the edge facing up), flat side towards the bottom end. Fix it with 1 screw 100232.
- Plinth rail onto the side panel — Push the plinth rail onto the side panel at the bottom front corner, lying on its front face, and fix it with 1 screw 100232.
- Second side panel — Stand the second side panel on its front edge, runners facing in, and push it onto the dowels of the top and both rails.
- Screw the second side panel — Fix the second side panel with 4 screws 100232: 2 into the top and 1 into each rail. Check: Tighten until the heads are flush; overtightening splits the board.
- Lay on the back panel — Unfold the back panel and lay it on the frame, smooth side out, with its notches at the two wall brackets.
- First nails at a bracket — Line the back panel up with the edges at the first bracket notch. Put a nail in the nail holder, hook the holder over the edge, and hammer the nail in. Pull the holder away and do the same beside the notch. Check: The holder keeps the nail in the middle of the panel edge, so it does not come out through the side.
- Nail two more corners — Keep the panel square: nail the bottom corner on the same side, then the top corner beside the other bracket, using the nail holder each time.
- Nail the back panel all round — Drive in the other 15 nails all round the edges, into the side panels, the top and the back rail, with the nail holder.
- Turn it over; felt pads — Tip the chest over onto its top, so it stands upside down. Hammer a felt pad into each corner of the side panels’ bottom edges.
- Stand it at the wall and mark — Turn the chest upright and stand it against the wall where it will stay. Reach in through the top drawer opening and mark the wall through the slot of each bracket. Check: Check for hidden pipes and cables before you drill.
- Move the chest aside — Move the chest away from the marks along the wall, so the wall is free to drill.
- Drill and plug the wall — Drill a hole at each mark (8 mm, 70 mm deep in solid walls) and tap in the 2 wall plugs with a hammer. For other walls use suitable fixings. Check: The plugs and screws suit most solid walls. For hollow walls or solid wood, see the manual’s wall chart or ask a specialist.
- Fix it to the wall — Push the chest back against the wall. At each bracket: loosen the screw 109049 so the bracket can slide, drive a wall screw 109048 with a washer through the bracket into the plug, then retighten 109049. Check: Always anchor it: a tipping chest can kill. Never let children climb it.
- Drawer 1: cam screws in the front — Now the drawers. Lay a drawer front face down on the rug and screw 4 cam screws 123492 into the holes at its ends. Then stand the front on its long bottom edge. Check: Screw them in only until the collar touches the board.
- Dowels in the drawer sides — Lay the two drawer sides down, runner groove up, and push a wooden dowel into the front end of each.
- Sides onto the front, lock — Push each side onto the front, dowel and cam screws into their holes, groove on the outside. Put 4 cam locks into the inside of the sides and turn them clockwise with a flat screwdriver to lock.
- Slide in the drawer bottom — Slide the drawer bottom into the grooves of the sides from the open back, all the way into the groove in the front.
- Fit the drawer back — Stand the drawer on its front. Lower the drawer back in between the sides, tilting it in, so it sits on the end of the bottom.
- Expansion dowels — Stand the drawer upright again. Hammer 2 expansion dowels 110519 through each side into the ends of the back.
- The knob — Hold the knob on the front and screw it on from the inside with the screw 108443.
- Stop screws, part way — From the inside, start a stop screw 102323 in the hole of each side. Screw it only a few turns: its tip must not come out of the side yet. Check: If the stop screws stick out now, the drawer will not go in.
- Drawer 2: the same again — Set the finished drawer aside and build the second drawer the same way (steps 19 to 26).
- Drawer 3: the same again — Set drawer 2 aside and build the third drawer the same way.
- Slide in the drawers — Hold each drawer level in front of its opening, with the grooves in its sides at the height of the runners, and slide it straight in. The drawer with the warning label goes at the top. Check: Never open more than one drawer at a time, and put the heaviest things in the bottom drawer.
- Tighten the stop screws — Pull a drawer out about 10 cm. Screw both stop screws in fully with a flat screwdriver, so their tips run in the runners’ slots behind the front ends. Close it and do the same for the other drawers. Check: The screw must sit behind the end of the runner, not in front of it, or the drawer can be pulled out.
- Done! — Your GURSKEN chest of 3 drawers is assembled and fixed to the wall.
GURSKEN chest of 3 drawers: questions and answers
How long does it take to assemble the IKEA GURSKEN chest of 3 drawers?
About 1.5–2.5 hours for 1 person, working through the 31 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.
What tools do I need for the GURSKEN chest of 3 drawers?
Phillips screwdriver, flat-blade screwdriver, hammer, pencil, drill (for the wall fixing).
Can one person assemble the GURSKEN chest of 3 drawers?
Yes, it is a one-person build.
Does the GURSKEN chest of 3 drawers need to be fixed to the wall?
The manual shows a wall fixing: see step 3 (Wall brackets on the top) and step 18 (Fix it to the wall). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.
What size is the GURSKEN chest of 3 drawers once assembled?
69x38x67 cm, as given for this model. Leave extra floor space around it while you build.
How many screws and fittings come with the GURSKEN chest of 3 drawers?
105 fittings of 17 kinds, the most numerous being 14 × wooden dowel, 12 × screw, 12 × cam screw. The In the box table lists every one with its part number, so you can count them before you start.
Where can I download the IKEA GURSKEN chest of 3 drawers assembly instructions PDF?
The official PDF is manual AA-2230354-6, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 004.863.27 (light beige); other colours have their own numbers but usually the same manual.
Which IKEA manual is this guide based on?
The official manual AA-2230354-6. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.
What if a part or screw is missing?
Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example runner 149842). IKEA customer service can send replacement fittings using that number.
Related assembly guides
- IKEA HEMNES 3-drawer dresser assembly instructions
- IKEA MALM chest of 3 drawers assembly instructions
- IKEA ALEX drawer unit assembly instructions
- IKEA LENNART drawer unit assembly instructions
- IKEA MALM dressing table assembly instructions
- IKEA BRIMNES bedside table assembly instructions
- IKEA ALEX drawer unit on castors assembly instructions
- IKEA STORKLINTA chest of 2 drawers assembly instructions
All dressers & drawers assembly guides · All furniture assembly guides
Stuck on a step? Common assembly problems and fixes · Furniture hardware explained